1, one end of the cable will be connected to the output control cable connector on the vibration generator, and the other end will be connected to the output control cable socket on the back of the electric box, and screwed tightly.
2. Clean the connection surface of the welding head, connect it to the transducer of the oscillator, and lock it with a wrench. Note: When connecting, you must make sure that the two connecting surfaces between the welding head and the transducer match and lock tight. Do not connect the screw is too long or slippery teeth can not lock the phenomenon, or produce sound wave transmission is not smooth and lead to damage to the machine.
3, loading and unloading of the welding head must use two wrenches to weld and transducer were stuck, not only one of the part of the card lock or loading and unloading, so as not to lead to the damage of the portable oscillator.
4, check 1, 2 points installed properly, the power cord outlet plugged into an external power outlet, and trigger the power switch, the power indicator light.
5, light pressure on the acoustic control switch, then you can hear the acoustic transmission to the weld head when the weld head issued by the "squeak" sound, indicating that the machine is working properly, can be put into use.
6, the machine in the work of anomalies, do not privately dismantle the equipment, please notify the supplier or send the equipment to the manufacturer for inspection and maintenance.