Part I: Mechanical Operator Job Responsibilities
I. Job Description
This position must be licensed to assist the leadership of the department to implement and complete a variety of work in the area of machinery management, conscientious and responsible, with a certain level of knowledge of mechanical operation, management, and do a good job. This job.
Second, the job
1, strictly according to the relevant mechanical safety regulations for the use and maintenance of machinery.
2, according to the departmental management system, do a good job on the shift and responsible for all the information organization of the machinery, record on time, submit on time, and will be the relevant situation in a timely manner to the team leader or mechanical supervisor report.
3, obey the work arrangements, within the scope of the safety regulations to obey the command of the site constructor.
4, must be conscientious, responsible use of machinery, machinery failure should be timely, take the initiative to report to the person in charge of machinery, and actively cooperate with the repairman maintenance work.
5, do a good job of random accessories, tools for safekeeping.
Third, the terms of reference
1, the construction process, in violation of safety regulations, the right to stop work.
2, the maneuverability of the machinery operated in conjunction with the attack has the right to direct and dominate.
Fourth, the responsibility
1, the operation of the machinery due to human factors caused by the loss of responsibility.
2, the operation of the machinery maintenance work is not enough to lead to mechanical failure caused by the loss of responsibility.
3, the violation of safety regulations for the operation of machinery safety accidents caused by loss of responsibility.
Part II: Mechanical operator duties
1. In order to ensure the normal work of the machine, the production of qualified products, the development of this system.
2. Machinery operators should receive pre-machine training, familiar with the basic performance of the machinery operated, master the operating procedures.
3. Machinery operators should do a good job at work to start the preparatory work, check whether the machinery is in good condition, and do the test run preparation.
4. The machine operator should adjust the product size according to the requirements, and keep adjusting the machine in the process of running to ensure that the product quality is maintained from the beginning to the end of the sample quality requirements.
5. The machine operator should keep the machine 'intact, neat and clean, and there should be no oil, dirt, garbage and other items on the surface of the machine.
6. Machinery operators shall not leave their posts without authorization, machinery failure should be stopped to deal with, and shall not be unauthorized operation to avoid safety accidents issued.
7. Machinery operators should do a good job of daily maintenance of machinery and equipment, and weekly scheduled maintenance and disinfection cleaning work, and carefully make a record, to maintain and improve the efficiency of the equipment. 8. Machinery operators should keep good maintenance tools, not without reason damage, loss.
9. Machinery operators should write the daily production daily, sign and submit to the production department on the same day. 10. machine operators do not use the machine off duty should turn off the machine power, such as using the machine should be made to stop. And in accordance with the provisions of the handover procedures.
Part III: Mechanical operator duties
1, abide by the rules and regulations, obey the scheduling, follow the instructions, the correct operation of machinery and equipment, give full play to the mechanical efficiency, to ensure that the quality of the equipment construction work, maintenance of equipment performance, and strive to reduce consumption.
2, conscientiously do the daily maintenance of machinery and equipment to ensure that the attached devices, random tools are often neat, intact, complete. Daily checkpoints, and will check the situation in the resume.
3, timely and accurately fill out the "mechanical equipment operation records" and "vehicle use records" sent to the Ministry of Equipment and Materials statistics on a monthly basis.
4, efforts to study technology, and constantly improve the level of operating technology to achieve five understand (structure, principle, performance, use, oil knowledge), three will (correct operation, routine maintenance, troubleshooting). Love and care of machinery and equipment.
5, to complete the leadership of the other work.
Part IV: Mechanical equipment operators
1, the requirements of the license on the mechanical equipment, must be issued by the relevant state departments of the effective operation of the document, and carry only on duty.
2, before the operation to accept the safety and technical briefing, master the content of the safety and technical briefing, sign the safety and technical briefing sheet, and retain a copy of the safety and technical briefing sheet.
3, in the operation should be strictly in accordance with the safety and technical operating procedures of machinery and equipment and the safety and technical delivery of the work, do not violate the rules of operation, is strictly prohibited to work in the work of alcohol or alcohol work.
4, in accordance with the technical maintenance of machinery and equipment procedures, do a good job of cleaning, lubrication, fastening, adjustment, corrosion and other items of machinery and equipment, so that the maintenance in place, no leakage of insurance, no lack of oil, no loss of water, to maintain the state of good condition.
5, mechanical equipment operations, should pay attention to observe the operation of mechanical equipment, found that the problem should be stopped in a timely manner to check, troubleshooting in a timely manner; can not be ruled out of the fault should be reported to repair.
6, to be dedicated, loyal, quality service, civilized construction, strict implementation of enterprise machinery and equipment management rules and regulations, accept the management of the inspection and supervision of the department, and obey the command of the site construction personnel.
7, to strictly comply with the company's quality / environment / occupational health and safety management documents related to machinery and equipment environmental protection provisions of the maintenance process of machinery and equipment should be stored in the designated location of solid, liquid waste, shall not be thrown, dumped, discharged.
8, to carefully and on time to fill out the mechanical resume, key mechanical equipment should also be carefully and on time to fill out the inspection records, and to achieve the content of the real, accurate data.
9, to learn, study technology, and constantly improve the technical and business level.
Part V: Mechanical operator duties
1, mechanical operator duties
1, all kinds of machinery and equipment operators must be licensed, is strictly prohibited without a license to operate machinery.
2, on duty personnel must listen to the team leader, the head of the work arrangements, and actively do their jobs.
3, the work must wear a helmet, wear non-slip shoes, is strictly prohibited to wear high-heeled shoes, slippers, to prevent drunkenness on duty to operate machinery.
4, before starting, must be in accordance with the requirements set out in the safety regulations of this machinery, do a good job of inspection and maintenance to ensure personal and mechanical safety.
5, work, must be concentrated, energetic, is strictly prohibited in the work of gossip, jokes, jokes, in order to avoid accidents.
6, special machinery and equipment shift operations, must do a good job of shift handover procedures, clear, complete signatures, so that "on the unclear, the next not."
7, after each shift of work must be routine inspection and maintenance of machinery, and do a good job of safety locking and protection, people away from the power off, close the box and lock.
2, machinery operator duties
1. In order to ensure the normal work of the machine, the production of qualified products, the development of this system.
2. Machinery operators should receive pre-machine training, familiar with the basic performance of the machinery operated, master the operating procedures.
3. Machinery operators should do a good job of starting the preparatory work, check whether the machinery is in good condition, and do a test run.
4. Machine operators should adjust the product size according to the requirements of the machine running in the process of continuous adjustment to ensure that the product quality from start to finish to maintain the quality of the sample requirements.
5. The machine operator should keep the machine intact, neat and clean, and there should be no oil, dirt, garbage and other items on the surface of the machine.
6. Machinery operators shall not leave their posts without authorization, machinery failure should be stopped to deal with, and shall not be unauthorized operation to avoid safety accidents issued.
7. Machinery operators should do a good job of daily maintenance of machinery and equipment, and weekly scheduled maintenance and disinfection cleaning work, and seriously make a record, to maintain and improve the efficiency of the equipment.
8. Machinery operators should keep maintenance tools, not without reason damage, loss.
9. Machine operators should write a daily production daily, sign and submit to the production department on the same day.
10. Machine operators do not use the machine off duty should turn off the machine power, such as using the machine should be made to stop. And in accordance with the provisions of the handover procedures.
3, machinery operator job responsibilities
A job description
This position must be licensed, to assist the leadership of the department to implement and complete the various aspects of machinery management, conscientious and responsible, with a certain level of knowledge of machinery operation, management, and do a good job. This job.
Second, the job
1, strictly according to the relevant mechanical safety regulations for the use and maintenance of machinery.
2, according to the departmental management system, do a good job on the shift and responsible for all the information of the mechanical organization, on time records, on time to submit, and will be relevant to the team leader or mechanical supervisor to report in a timely manner.
3, obey the work arrangements, within the scope of safety regulations to obey the command of the site constructor.
4, must be conscientious, responsible use of machinery, machinery failure should be timely, take the initiative to report to the person in charge of machinery, and actively cooperate with the repairman maintenance work.
5, do a good job of random accessories, tools, storage work.
Third, the authority
1, the construction process, in violation of safety regulations, the right to request a work stoppage.
2, the mobility of the machinery operated in conjunction with the attack has the right to direct and dominate.
Fourth, the duty
1, the operation of the machinery due to human factors caused by the loss of responsibility.
2, the operation of the machinery maintenance work is not enough to lead to mechanical failure caused by the loss of responsibility.
3, the violation of safety regulations for the operation of machinery safety accidents caused by loss of responsibility.