The key is to rinse, first of all, absolutely do not use hot water, because hot water leads to thermal expansion of the lens to the resin lenses in the membrane burst (my last pair of glasses is so bad).
You should use cool water to rinse, don't use cloth to wipe, because any eyeglasses cloth, chamois or anything else can't wipe the lenses perfectly, even ingot wipe the more fuzzy, and if there is hardness of dust inside the cloth, it will scratch the lenses, and you have to wash the cloth regularly, which is a bit troublesome.
I have a good way to wash the lenses, is to turn off the faucet is very small, the formation of a small column of water, and then make the lens and the column of water nearly parallel to the "scanning" rinse lenses, and then the lenses will be dripping water does not stay, very clean, and there is no need to use a cloth to wipe. If there is a "non-spherical" water residue on the lens, the lens has just been touched by the hand or oil, this situation is recommended to re-use detergent.
Question 2: How to clean and maintain glasses? 1. Cleaning with detergent and water, and then rinse with water, wipe dry when the focus (the most likely to spend the lens) do not catch the lens hard to wipe, because you are before the detergent water, so just use a clean paper towel to dry the surface of the water can be (is dry without wiping)
2. Not when you use the glasses with a glasses cloth wrapped in glasses case, which prevents collision, fall
3.
3. Because you are not special sports goggles, please take off your glasses and put them into the case when you play sports
4. Take off your glasses with both hands, one hand will deform the frame, if you are frameless, you should pay more attention to this, because one hand may make your glasses broken
5. If there is already a deformation, do not go to the ****. Take to the optical store to adjust
6. If you are a metal frame, it is best to go to your optician to add anti-sweat set (this service is free) because your sweat will corrode the metal, over time there will be a greenish bronze, the position of the nosepiece can not be added to anti-sweat set that can only be cleaned diligently
7. Avoid high temperatures and ultra-low temperatures, such as: taking a shower, into the freezer, high temperature and low temperature of the work. Such an environment will make the film layer on the lens rupture, fall
Problem three: eyeglass lenses with what to wash will not spend, in addition to the professional cleaning agent 10 points Eyeglass lenses flower is not the problem of the washing liquid, but with what material eyeglasses cloth, there is the kind of cowhide eye cloth, wipe will not spend,
Problem four: what method to clean the glasses the brightest Most of the optical stores in the help of the customer to clean the glasses, the vast majority of the cleaning solution is used to clean the eyeglasses. The vast majority of the use of cleaning fluid, which is often referred to as water washing. Water is no fiber, of course, to avoid scratching the lenses. So when cleaning the lenses, we recommend water washing. Here is a simple and practical way to clean glasses for those who are interested. (1) in the tap under the lens wet; (2) in the lens drops of detergent, and then use the thumb and forefinger gently rubbing the lens; (3) tap open large, the lens on the detergent rinse off, pay attention to rinse time do not touch the lens with your hands, it will leave fingerprints. (4) Turn the faucet water flow down so that the lenses stand upright, so that the edges of the lenses go along the fine water flow. If your glasses are absolutely clean, there will be no water droplets left on the lenses, but a uniform film of water, which we learned in middle school chemistry. Don't wipe the film of water on them with an eyeglass cloth, because it won't affect your vision at all. Put it on, isn't the world a lot brighter? After a few minutes, the water film on the lenses will dry automatically.
Question 5: What is the best way to clean eyeglass lenses when they are dirty? The glass ones are fine, the resin ones should never be rubbed with anything!
I use this method to wash the lenses, August 2006 lenses to now (2007.3.28) has not been a scratch, but also the phenomenon of debonding
The first step: with water to rinse the lenses wet, so that there are droplets of water on the lens on the
The second step: to the fingers of the finger to squeeze a drop of detergent (I use white cat, lemon flavored :D) with the forefinger and thumb to evenly spread the touch on the lens. The lenses will be on the surface of the lens.
Step 3: Rinse the detergent off the lenses with a gentle stream of water
At this point, you'll see that the lenses are as clean as new, with just a few drops of water left on them.
Don't wipe with a paper towel or the lens part, the correct way is
Step 4: Put the paper towel which has a small tip to wash off the water
Done!
Detergent is very safe, rinse clean will never cause corrosion of the lens, we are near the owner of the eye store is to use detergent with their own cleaning solution
Question six: wipe the glasses with what to wash Hello, resin lens maintenance methods are as follows: (Baidu experience is very specific)
The first step is to first use water to rinse the glasses: open the faucet, so that the water has certain Pressure, the resin eyeglasses lenses glasses under the faucet rinse, first rinse the side of the lens, and then rinse the other side of the lens, the purpose is to rinse off the surface of the lens dust sand particles, to avoid scratches on the surface of the lens.
Step 2
Clean the lenses with soap or detergent: rinse the glasses with water on both sides of the lens coated with detergent or soap foam, use your thumb and forefinger to pinch the sides of the lens, clockwise or counterclockwise wipe the lens until the detergent or soap foam evenly coated on both sides of the lens, the two lenses wiped in the same way.
Step 3
Rinse off the foam on the surface of the lens with water: after wiping the surface of the lens is full of foam, then open the faucet, while rinsing the lens with water, while using your thumb and forefinger to clean the lens, until the surface of the lens is no longer smooth, revealing the lens is clean and clear after the lens can be turned off the faucet.
Step 4
Dump the water droplets on the lenses: After washing the lenses with water, fold the legs of the glasses, pinch the legs of the glasses with your thumb and forefinger, and press the middle finger to hold the middle part of the frame, and shake off the water droplets on the glasses with force, and you'll find that after the fall, there are still a lot of tiny droplets left on the lens, and this time, the cleaning is not yet complete.
Step 5
Use a clean eyeglasses cloth to suck off the small water droplets on the lens: the small water droplets on the lens can not be left on the lens, otherwise, the water droplets will remain on the surface of the lens after drying the water marks, which affects the use of the lens, this time, take out the prepared clean eyeglasses cloth, and gently suck up the small water droplets on the glasses, so that, the cleaning of the lens maintenance is complete.
Step 6
Clean the frame and legs of the glasses: use the glasses cloth to gently wipe the frame and legs, usually rinsed with water, the frame and legs have been basically clean, when wiping, pay attention to not wipe to the eyeglasses lens, to ensure that the eyeglasses lens is not contaminated by the second time. So far, the resin lens glasses cleaning and maintenance is complete.
Question 7: How to clean glasses? The correct way to wipe glasses lenses:
1. First rinse the glasses with water, squeeze a drop of detergent, mixed with a little water, coated in the lens, gently rubbed.
2. Then rinse with water, gently shake the glasses, the remaining water droplets on the lenses, with a clean cloth or clothes (do not lose the lint) can be sucked dry.
Try not to rub as hard as possible, if there are still stains, then repeat the above steps, and then repeat until clean.
It is best to have two pairs of glasses: one for reading, writing, watching TV, and using in a clean environment; and one for use in a polluted environment, such as manual labor, kitchen frying, repairing electrical appliances, as long as the chemical reaction gas produces the place, the lens often produces a number of difficult to get rid of the tiny particles.
So: more glasses are necessary.
The glasses should be protected from the outside world by touching it when not in use, to avoid contamination of the lenses, in order to last and be clean.
Question 8: Can glasses lenses be cleaned with hand sanitizer? If not, what should be used to clean? Hello, every day with water can be flushed down, if dirty, then available detergent and water cleaning, washing available mirror cloth or paper towel dry, wipe the direction to the same direction is better. I hope to adopt.
Question 9: How do you clean resin glasses? Teach people how to clean resin glasses Answer 1: Some people mentioned the life of resin lenses, I think, it is just to consider the scratches on the surface of the mirror to affect the visual problem. If a pair of lenses in the absence of damage, and in the case of scratches do not affect the visual situation, if he also talked about the life of resin lenses, it can only be taken into account that he does not cherish their eyes, he is worried about can only be: if the glasses can be followed by the eyes with the change of degree, it would be so good! . Cleaning resin lenses can not be wiped at all, and do not need to wipe. Because then the soft quality of the eye cloth may be stained with other hard particles, once you wipe the lenses, it will produce a slight scratch, day after day, the lenses are naturally scarred, early into retirement age. I have a method, you may wish to try: first water rinse the mirror, in the use of ordinary washing liquid (such as: dishwashing detergent; or laundry detergent thick liquid), squeeze on a drop of finger gently coated with the mirror, to determine the smear are all mirrors, the eye frame of the crevices can be used with a toothbrush dipped in detergent gently scrubbing, and then in the water rinsing, rinsing, pay attention to the water flow is not too large, can make the water flow in the mirror on both sides of the into the stock! It is appropriate to make the water flow into a stream on both sides of the mirror, which can save water and have a good effect. After rinsing the washing liquid, the mirror is naturally dripping water does not hang, occasionally one or two drops of water, can be blown away by the mouth. I have been using this method, three or four years did not change the glasses, during which I tried a variety of detergents, and finally came up with the following results: 1. Dishwashing liquid at home, convenient and affordable; 2. Laundry detergent, the effect can be, is more trouble, but also have to be liquefied first. 3. If you often travel, toothpaste can also be, but some toothpaste contains abrasive ingredients, a little inattention will hurt your favorite glasses. Answer 2: The principle of maintenance for resin lenses is to keep the lenses bright and clean, not stained with oil, and avoid scratches. Wipe the lens before the best first tap water rinse, you can also use neutral soap or special cleaner cleaning, clean water after washing with a special lens wipe clean. To clean the fine cracks between the frames, you can use a soft old toothbrush to gently brush and remove the dirt. Avoid contacting the lenses with high temperatures in your daily life, because high temperatures can cause the film layer to break or even fall off due to the inconsistent thermal expansion and contraction of the film layer and the lens substrate. It is also important to avoid exposing the lenses to strong organic solvents, such as acetone, ether and perfume, as these organic solvents can affect the surface finish of the lenses. In addition, the way of placing the glasses should also develop a fixed habit, first use the flannel to wrap the lenses, and then close the legs, in order to prevent the glasses from being heavily pressurized, the glasses can be placed in a hard glasses collection box. 1, when wearing glasses, do not contact the convex surface of the lens with hard objects, it is best to put in the box to save. 2, Resin lenses should be rinsed with water, then cleaned with special cleaner for resin lenses or a small amount of detergent, and finally dried with special cloth for resin lenses. 3, the application of resin lenses special mirror cloth to wipe, due to the ordinary mirror cloth fiber loose, easy to mix sand, will make the lens wear, so it is best to first rinse the lens with water, and then wipe dry with a proprietary mirror cloth
Question 10: How to clean the eyeglasses lenses? Wash stands fuzzy because of all kinds of sweat or oil,, wash the fuzzy. If you have the conditions, you can use a special solution to wash eyeglass lenses, you can also send to the store to maintain, I used to wash with detergent.... I used to wash them with detergent and then dry them with a cloth. Other cloths will scratch your glasses... Remember to put them in the glasses case after use.