When renovating, especially in circuit remodeling, it is important to determine the location of outlets and switches. The number of switches and outlets required in each room should also be confirmed. This is the layout of the switches and outlets in the room. Depending on the location of our presses and closets, we should have outlets and some closets should have outlets.
This is the era of smart homes. Some families will consider installing motorized window treatments in the future. If they don't install them for a while, they will keep an outlet. Keep an outlet near the curtain rod for backup. So we need to consider the layout of switches and outlets in the bedroom. Just like the outlets in the bedroom, one should be reserved on either side of the bed. Reserve two outlets at the TV location and one three-hole outlet with a switch at the air conditioner location. If you have a computer, reserve a three-hole outlet with a switch and one or two outlets in the bedroom.
The switch is recommended to be a dual-control or dual-circuit control overhead light switch. If there is an electric water heater in the bathroom, you should reserve a three-hole outlet with a switch. If there is a washing machine, reserve a three-hole socket with a switch next to the washing machine. Reserve a hair dryer outlet next to the sink mirror. One socket next to the toilet. Then reserve one or two outlets in the appropriate locations for the toilet, and there should be an on/off switch for the lighting fixtures in the bathroom.
Don't forget the front-view mirror lights and reserve a switch. Sockets on either side of the bed in the bedroom are essential. At least two sockets should be installed. You can use table lamps, cell phones and iPads. remember to install dual controls. If you turn off the lights at night, you won't have to get up and run to the door. The location of the sockets should not be blocked by the size of the furniture and the plumbing mains or they will be wasted if you can't use them. There are many appliances in the kitchen. At least 2-3 sets of outlets should be installed on the countertop. It is better to bring a switch, otherwise it is dangerous to pull out the socket with wet hands. The installation height of the sockets should be kept around 1.2m-1.3m. ?