ce certification belongs to the European Union mandatory product certification, generally the product needs to be exported to the European Union, to do the certification.
The CE mark is a safety mark rather than a quality mark, is the core of the European directive constitutes the "main requirements", is regarded as a passport for manufacturers to open and enter the European market.
To show that the product meets the basic requirements of the European Union's "New Approaches to Technical Harmonization and Standardization" directive.
CE certification explained in detail:
I. Factory self-control and certification Module A:
(internal production control):
1, used for simple, large-volume, non-hazardous products, and is only applicable to the application of the European standards for the production of manufacturers.
2. The factory conducts its own conformity assessment and self-declaration.
3, technical documents submitted to the national body to keep ten years, based on which, available reviews and inspections to determine whether the product is in line with the directive, the producer must even provide the product design, production and assembly process for inspection.
4, do not need to declare that its production process can always ensure that the product meets the requirements. Module Ab, the manufacturer has not been produced in accordance with European standards, the testing agency for random testing of special parts of the product.
Reviewed by the testing organization Module B:
(EC type review):
The factory sends samples and technical documents to the testing organization of its choice for review, and the testing organization issues a certificate.
Note: B alone is not sufficient for CE purposes.Module C (Consistency with Type [Sample]) + B.
The factory makes a Declaration of Conformity (with the certified type), which is kept for ten years.
Module D (Production Process Quality Control) + B. This module focuses on production process and final product control.
The factory produces according to the methods approved by the testing organization (quality system, EN29003), on the basis of which it declares that its products are consistent with the certified type (Declaration of Conformity).
Module E (Product Quality Control) + B This module focuses only on the control of the final product (EN29003), the rest is the same as Module D. Module F (Product Testing) + B.
The factory makes the Declaration of Conformity after assuring that its production process ensures that the product meets the requirements.
An accredited testing organization verifies the conformity of its products through full inspection or sample testing. A certificate is issued by the testing organization.ModuleG (test-by-test).
The factory declares that it complies with the requirements of the Directive and submits the technical parameters of the product to the testing organization, which then issues a certificate after checking the product one by one.
Module H (Integrated Quality Control) This module focuses on design, production process and final product control (EN29001).
The rest is the same as Module D+Module E. Of these, Module F+B, and Module G are applicable to products with a particularly high degree of risk.
Second, the mark description:
Europe _ since 1990, the implementation of the CE marking of toy products, in the implementation of the trend has been strict.
But the domestic toy manufacturers in the product or packaging printed on the CE marking, did not fully in accordance with the size of the relevant provisions of the production.
The Council here will call the attention of domestic manufacturers of toys on the CE marking, trade names, trademarks, European _ agent and importer's address.
Must be obvious, easy to read style, paste or printed on the toy body or other packaging, if the toy is too small, or the Department of small parts of the toy.
Can be printed on the toy packaging or catalog, Europe _ for the size of the CE mark, there are packaging regulations.
The height of the word CE should be at least 5mm, and the length of the word CE shall not exceed a total of 12mm, the width of the CE font, should be not less than 1/5.
Thickness should be at least 1/5 of the height (here at least 20 × 1/5 = 4mm).
Figure peripheral radius of 10mm.
Inner peripheral cross-posts should be at least 80% of the peripheral radius (10 x 0.8 = 8mm).
The diagram shows an example of CE labeling with a height of 2cm, the labeling should include.
Warnings and cautions printed in local market languages.
Manufacturer or authorized agent, importer name, trademark and address. Compliance with the provisions of the CE.
Three, CE certification:
In the past, the European **** body countries on the import and sale of products with different requirements.
Goods manufactured according to one country's standards would most likely not be marketed in other countries, and as part of the effort to eliminate trade barriers, CE came into being.
Thus, CE stands for European harmonization (CONFORMITEEUROPEENNE).
In fact, CE is also an abbreviation of the phrase "EUROPEAN COMMUNITY" in the languages of many countries in the European **** body, which was originally abbreviated to EC by the English phrase EUROPEANCOMMUNITY.
Later, because EUROPEAN COMMUNITY is COMMUNAUTE in French, it is also known as EUROPEENNE.
This is the first time that CE has been used as an acronym for "European unity. EUROPEENNE.
Italian COMUNITA EUROPEA, Portuguese COMUNIDADE EUROPEIA, Spanish COMUNIDAD EEUROPE, etc., so change EC to CE.
Of course, it is also worthwhile to regard CE as the CONFORMITYWITHEUROPEAN (DEMAND) (in line with European requirements).