Foot switch types common foot switch introduction

In our lives, to use electricity are inseparable from the use of switches. In industrial production, after connecting the current, the use of small switches is very inconvenient, so turn to the use of foot switches is more appropriate. So, what are the types of foot switches? Below, I would like to talk to you about the types of foot switches.

A, foot switch types

1, JDK-11-6A foot switch

①Use

a, like this type of foot switch, suitable for all circuits to control the motor to rotate in the direction of the use of the main circuit can also be varied to allow small motors for the operation of stopping, down, down. For example: table tiles, hydraulic presses, medical equipment, shearing machines, etc. can be used in the foot switch operation mode to carry out switching operations.

b, when the variable circuit into the main circuit, the control of small small motors must be equipped with fuses as well as disconnect switches in the front section of the power supply into the line. This design is for safety considerations, when the maintenance will need a foot switch to carry out rapid cut-off, so as to protect the personal safety of the operator.

②Product Features

Mainly used in circuits that require frequent power cut-off and connection. And also comes with the function of contact self-locking, through the foot pedal to trigger the contact, and then through the foot pedal to unlock the contact, can realize the OFF-ON-OFF alternate cycle mode. In the pedal, but also to do with a good anti-slip design, so that the operation is more efficient.

2, YDT1-14 foot switch

①Scope of application

This type of foot switch is suitable for use in the AC 50HZ, rated voltage AC380V and 5A control circuit. For example: machine tool electrics, medical equipment and so on. One point worth noting is that this type of foot switch can not be used in the area of more than 2000M above sea level. In addition, the air humidity is more than 85% can not be used.

②Use

This type of foot switch is suitable to be used in the control circuits of AC60HZ, rated voltage AC220V and 5A. It is significantly different from the previous one, it adopts double silicone gaskets, and has a very good waterproof grade, safety, sensitivity and performance are also very good.