01. Special Operation Operator's License (Ministry of Emergency Management (General Administration of Safety Supervision))
State Administration of Safety Supervision, "Regulations on the Administration of Safety and Technical Training and Examination of Special Operators":Special operations refer to those that are prone to accidents, and that may cause significant hazards to the operator's own safety and health, as well as to the safety of the equipment and facilities. The scope of special operations is stipulated by the catalog of special operations. The special operators referred to in the regulations are those who are directly engaged in special operations. Special operators hold a document called special operations license.
Specialty work types include: high-voltage electrical work, low-voltage electrical work, fusion welding and thermal cutting work, elevated erection work, installation, maintenance and demolition work at height.
Including operations:
1. electrician work: (high-voltage electrical work; low-voltage electrical work; power cable work; explosion-proof electrical work; relay protection work; electrical test work)
2. welding and thermal cutting operations: (fusion welding and thermal cutting operations; pressure welding operations; brazing operations) does not include "special equipment safety supervision regulations" stipulated by the Related Operations
3. Height Operations (Class I height operations; Class II height operations; Class III height operations; special height operations; elevated erection operations; height installation, maintenance, demolition operations)
4. Refrigeration and Air Conditioning Operations
5. Coal Safety Operations
6. Natural gas safety operations
8. Metallurgical (non-ferrous) production safety operations
9. Hazardous chemical safety operations
10. Fireworks safety operations
11. Site elevator lifting operations
12. Other operations recognized by the General Administration of Safety Supervision
Certificate search URL:/
02.? Special equipment operators special equipment operation certificate (AQSIQ)
"Regulations on the Safety Supervision of Special Equipment" stipulates: Boilers, pressure vessels, pressure pipelines, elevators, lifting machinery, passenger ropeways, large-scale amusement rides, the field (factory) of special motor vehicles and their related management personnel, should be in accordance with the relevant provisions of the state after the supervision and management of special equipment safety assessment and qualification, to obtain a national unified format of special operators, and to obtain a national unified format of special operators. Obtain a national unified format of the special operators certificate, before they can engage in the corresponding operations or management. Local quality and technical supervision under the State Administration of Quality Supervision issued by the "special equipment operators license.
Special equipment workers, including: elevator safety management, crane safety management, field (plant) special motor vehicle safety management, industrial boilers, open-type pressure vessel operation, crane command, crane driver (limited to bridge cranes), crane drivers (limited to gantry cranes), forklift drivers and so on.
Including operations are:
Boilers, pressure vessels (including cylinders), pressure piping, elevators, cranes, passenger ropeways, large amusement rides, the field (plant) special motor vehicle operators and their related management personnel.
Certificate inquiry site: cnse.samr.gov.cn
03.? Special Operation of Building Construction (Ministry of Construction)
The Provisions on the Administration of Special Operators of Building Construction stipulate that:? Building construction special operators refers to the building construction and municipal engineering construction activities, engaged in operations that may cause significant harm to themselves, others and the safety of surrounding equipment and facilities. Building construction special operators must be qualified by the construction department in charge of the assessment, to obtain the construction of special operators operating qualification certificate (hereinafter referred to as "qualification certificate"), can be on duty to engage in the corresponding operations.
Special types of construction work include: construction electrician, construction scaffolding (ordinary scaffolding), construction scaffolding (attached lifting scaffolding), construction lifting crane crane signaling, construction crane driver (tower crane), construction crane driver (construction crane), construction crane driver (material cranes), construction crane dismantling (tower crane), construction crane dismantling (construction crane), building crane dismantler (construction cranes), construction crane dismantler (material cranes), aerial work basket installation and dismantling workers.
Building construction special operations include:
(a) construction electrician;
(b) construction erector;
(c) building lifting signals Division ropewalker;
(d) construction crane driver;
(e) construction crane installation and dismantling of workers;
(f) work at height basket installation and dismantling of workers;
(f) the work at height basket installation and dismantling of workers;
(g) the construction of the construction industry, the construction industry, the construction industry, the construction industry and the construction industry.
(VII) by the provincial people's government departments in charge of construction recognized by other special operations.
Certificate search site: provinces, autonomous regions, municipalities directly under the Central Government construction department official website can be through the "Chinese people's *** and the State Ministry of Housing and Urban-Rural Development" official website:, in the bottom of the home page of the site to find the "local authorities website" column click to enter. A column click to enter.
Special operation certificate is engaged in special operations of the necessary certificates, common special operation certificate for the Emergency Management Agency, the Construction Department, the Quality Supervision Bureau of the three departments in charge, today I'll give you an introduction to the difference between these three kinds of special operation certificates, the conditions of application.
One, the Emergency Management Agency (formerly the Safety Supervision Bureau) special operating license commonly known as ""induction"", the certificate every three years for a review, six years for a new license. Common low voltage electrician and high voltage electrician are issued by the Office of Emergency Management.
Special Operation Certificate Program
Please click to enter a picture description
The ANSA certificate is generally applicable to scenarios other than construction site applications, and is the most widely applicable special operation certificate.
Special operation license examination is divided into theory examination + practical examination (review students only need to participate in the theory examination), full of 100 points, theory and practical examination pass line are 80 points.
The new version of the special operating license are now using the electronic version of the certificate
Please click to enter a description of the picture
The former Safety Supervision Bureau special operating license unified in the Office of Emergency Management official website query:
The second, the Quality Supervision Bureau of special equipment operation
Special equipment operations, including forklifts, boilers, crane operations, etc., according to the national security law, to obtain a national Uniform format of the special operators certificate, can be engaged in the corresponding operations or management.
Quality Supervision Bureau of special work registration types: see below
Please click to enter the picture description
Special equipment operations on the operator has a more stringent requirements, is engaged in special equipment must be certified, even if it is the Office of Emergency Management's operating license you can not operate special equipment operations. Quality Supervision Bureau special equipment operations need to be reviewed every four years.
Enrollment conditions
At least 18 years old, male ≤ 60 years old, female ≤ 50 years old
Enrollment information
1, ID card scanned, 2-inch white background photo, proof of academic qualifications (or the current page of the photo of the person's account book)
Quality Supervision Bureau of special equipment samples:
Please click on the input image description
Third, the construction department special work operation certificate
Construction department operation certificate full name: building construction special work operation qualification certificate, is the construction industry necessary induction certificate. Generally used in housing municipal, construction and other projects. Construction department certificate every 2 years to implement a review.
Construction Department work type table
Please click to enter the picture description
Declared work types: construction electrician, construction erector, construction crane driver, etc.
Enrollment conditions
Over 18 years of age and in the legal age of retirement, the body does not have a major disease.
Application information:
1, ID card scan
2, my cell phone number
3, graduation certificate
4, my 2-inch photo
Construction Department of the special work sample
Please click to enter the description of the picture
four, excavator, bulldozer, loader, road roller, paver!
Since 2012, engineering and construction machinery is no longer listed in the catalog of special equipment (except for a few types of machines such as tower cranes, construction hoists, and travelling vehicles). Excavators, loaders and most other machine types of construction machinery is no longer special equipment, does not involve special operations, and therefore no longer a special operating certificate. Quality Supervision Department is responsible for the regulatory functions in the field of production and manufacturing, and no longer handle the construction site link of the engineering construction machinery type of operation certificate.
Trainee training certificate and construction operation certificate (belonging to the ability to access), special qualifications (belonging to the industry access), vocational qualifications and skills level certificate (belonging to the occupational level certificate) in the actual engineering and construction are complementary, and is not antagonistic; part of the legal profession and netizen trainees tend to confuse the three, one-sidedly expanding or publicizing the scope of application of one of the certificates can be replaced by two other certificates. The certificate will be used as a substitute for the other two certificates, which will cause misunderstanding and confusion to the construction sector, students and social regulatory agencies.
China Construction Machinery, six-year validity, annual inspection
Excavator/loader/bulldozer/roller/grader
Paver/truck-mounted crane/rotary drilling rig (non-specialty operations)/pile-driver/aerial work platform operation (non-specialty operations)/concrete pump operation/construction site forklift truck operation (non-specialty operations)/aerial work platform operation (non-specialty operations)
Construction site forklift operation (non-specialty operations). Aerial work truck operation (limited to non-specialty work)
Inquiry website: www.zgjjzyjy.org