The height required for the installation of the water heater is most suitable between 1M-2M from the ground.
1, this height is just the height of the human body, in the bath, if you need to adjust the temperature and power of the electric water heater, are just right to adjust.
2, the other is the electric water heater link shower outlet pipe length is limited, the general factory outlet pipe length is 1.2M, if the installation is too high, the length of the shower outlet pipe is not enough, then in the shower, in a bit out of reach.
Expanded Information:
Electric water heater installation precautions:
1, the location of the electric water heater installation is basically in the bathroom, the installation should be a load-bearing wall, in general, electric water heater installation of the requirements of each merchant should be to choose a load-bearing wall. Load-bearing wall refers to the wall thickness of more than 24 centimeters of solid brick wall, or concrete wall or concrete beams are load-bearing wall. Do not choose a lightweight wall or partition wall as the installation of electric water heaters, these walls are not strong bearing force, to avoid leaving hidden dangers for future home life.
2, electric water heater installation circuit must have a grounding wire, to avoid circuit and water short circuit. To the electric water heater supporting socket, try to avoid the shower area, and need to choose the socket with switch, and must be equipped with a waterproof box, to avoid water into the jack, causing short-circuit problems.
3, electric water heater pressure relief valve must be in accordance with the deflector, and can ensure that the deflector can lead the water to the floor drain or drainage. Concealed pipe mouth from the bottom of the water heater distance is generally greater than 30 centimeters is appropriate, while the distance between the inlet and outlet can be about 10 centimeters, the mixing valve of the hot and cold water mouth distance of 15 centimeters.
References: