Hinge, which is what we usually call hinge, it is used to connect two solid and allow the two to do relative rotation of mechanical devices. It can be used to produce a number of precision instruments, but also in daily life applications, such as our common cabinet doors, they tend to use the hinge this connection, with the choice of materials, you can achieve good results, and hinges are often used in alloy materials, the surface of the special sandblasting treatment, so the later will not rust, the service life is relatively good, the next may as well follow the editor's guide. Good, the next may wish to follow the editor together to understand the information about the hinge installation it.
A hinge brand ranking
Ranking first: Blum (English: Blum)
Ranking second: Hettich (English: Hettich)
Ranking third: Dongtai (English: DTC)
Ranking fourth: Hafle (English: HAFELE): HAFELE)
Ranking fifth: Huitailong (English: hutlon)
Ranking sixth: Yajie (English: ARCHIE)
Second, what is the hinge connection
Hinges, also known as hinges, are used to connect the two solids, and allow both to do the rotation between the mechanical device. Hinges may consist of removable components or of collapsible materials.
Hinges are mainly installed on windows and doors. Hinges are more often installed in cabinets
By material classification is mainly divided into, stainless steel hinges and iron hinges
In order to allow people to get a better enjoyment of the emergence of the hydraulic hinges, characterized by a certain degree of cushioning, to minimize the noise.
Three, the cabinet door hinges how to install
1, the minimum door distance:
First of all, we have to determine the minimum door distance between the installation of the cabinet door, or the two doors are always "fighting" on the unattractive and impractical. Minimum door distance according to the type of hinges, hinge cup margins and cabinet door thickness to select the value. For example: the door thickness of 19mm, hinge cup margin of 4mm, then the minimum door margin of 2mm.
2, the number of hinges selected
Cabinet links to choose the number of experiments according to the actual installation to determine the number of hinges used with the door panel depends on the width and height of the door, the door of the weight of the door panel, door panel of the material. For example: height of 1500mm, weight between 9-12kg door, should choose 3 hinges.
3, the shape of the cabinet hinges:
The cabinet with two built-in rotatable baskets, need to be fixed at the same time the door and door frame, the most important thing is that because of the built-in baskets decided to open it to a very large angle, then the curvature of the hinges must be large enough to ensure that you can be free to open the door to the right angle, easy to pick up and put down any object.
4, hinge installation method of selection:
Open the door according to the door edge and the side of the side panel of the position points, and there are full cover door, half cover door and embedded door three installation methods. Full cover door basically covers the side panel; half cover door is covered over half of the side panel, especially suitable for the middle of the partition, the need to install more than three doors of the cabinet; embedded door is installed within the two side panels.
5, cabinet door hinge installation process:
① hinge cup installation method ② hinge seat installation ③ cabinet door hinge installation
6, the door plate adjustment:
By loosening the hinge seat on the fixing screw, sliding back and forth hinge arm position, there is a range of 2.8mm of adjustment. After adjustment, the screw must be re-tightened.
①Forward and backward adjustment of the common hinge seat: by loosening the fixing screw on the hinge seat, slide the hinge arm position forward and backward, there is a 2.8mm adjustment range. After adjustment, the screw must be retightened.
②Forward and backward adjustment using a cross-shaped quick release hinge seat: this cross-shaped quick release hinge seat has a screw-driven eccentric cam, rotating cam can be adjusted in the range of -0.5mm to +2.8mm, without loosening the other fixed screws.
③Forward and backward adjustment using a zigzag quick release hinge seat: this zigzag quick release hinge seat has a screw-driven eccentric cam, the rotating cam can be adjusted in the range of -0.5mm to +2.8mm without loosening other fixing screws.
④Door side adjustment:After the hinge is installed, the door side distance should be 0.7mm before any adjustment is made so that the adjusting screw on the hinge arm can be adjusted within the range of -0.5mm to +4.5mm. If you use thick door hinges or narrow door frame hinges, the range of this parameter is reduced to -0.15mm.
The above not only introduces the concept of hinge connection, but also gives the installation method, which can be learned as a common practice, on the one hand, it can play a role in connecting and fastening, and on the other hand, can also support consumers to carry out the latter part of the movement of the friends. In addition to hinges according to the material can be divided into stainless steel hinges or iron hinges, according to the later processing operation process, but also can be further divided into different areas of friends, you can choose the size of the rich specifications, the service life of the hinge products are guaranteed.
Tuba Rabbit online free for everyone to provide "home decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~