Product Overview (SVC single-phase, three-phase high-precision automatic AC voltage stabilizer)
SVC series single-phase, three-phase high-precision automatic AC voltage stabilizer (voltage stabilizer), by the contact autocoupler high-voltage, servo motor, automatic control circuit, etc., when the grid voltage is unstable or the load changes, the automatic sampling stabilizer control circuit sends out a signal to drive the servo motor, adjust the position of the regulator autocoupler carbon brush, so that the regulator output voltage adjustment to the rated value and reach the rated value. Adjust the position of the regulator autocoupler regulator carbon brushes, so that the regulator output voltage is adjusted to the rated value and reach a stable state.
This series of voltage regulator for ordinary type, with utility through function. This series of voltage regulator product variety, specifications, beautiful appearance and other advantages. With waveform distortion, high efficiency, reliable performance, long-term operation and other characteristics, the regulator has a short delay, over-voltage and other protective functions, according to the needs of users can add a long delay and under-voltage protection. The voltage regulator can be widely used in any place of electricity, is an ideal voltage stabilized power supply (voltage regulator), to ensure the normal operation of your electrical equipment.
Occasions (SVC single-phase and three-phase high-precision automatic AC voltage stabilizer)
This voltage stabilizer can be used in office equipment, test equipment, medical equipment, industrial automation equipment, household appliances, lighting systems, communication systems and any other places where electricity is used.
Main technical parameters (SVC single-phase, three-phase high-precision automatic AC voltage stabilizer)
Input voltage 160V-250V
Three-phase 277-430V (three-phase four-wire) Adjustment time <1 second (when the input voltage varies by 10 percent)
Output voltage Single-phase 220V & 110V (0.5kVA- 3kVA)
Single-phase 220V (5kVA-30kVA)
Three-phase Line Voltage 380V Phase Voltage 220V Ambient Temperature -10℃-+40℃
Temperature Rise <60℃
Regulation Accuracy Phase Voltage 220V±3% 110V±6% Waveform Distortion No additional waveform distortion
Frequency 50Hz/60Hz Load Power Factor 0.8
Overvoltage Protection 246V±4V Resistance 1500V/1min
Insulation Resistance Single-phase >5MΩ Three-phase >2MΩ
Model Specification (SVC Single-phase and Three-phase High-precision Fully-automatic AC Voltage Regulator)
Phase No. Model Specification
(kVA) Product Dimensions
(D×W×H)
(mm)
Packing Dimensions
(D×W×H)
(mm) Desktop
Number of Phases Model Specification
(kVA) Product Dimensions
D×W×H
(mm) Packing Dimensions
(mm) p>
(D×W×H)
(mm) Desktop
Single-phase
(Desktop) SVC-0.5 190×180×130 250×440×350 4 Single-phase
(Vertical) SVC-5 300×240×430 310×290×480 1
SVC-1 220×210×160 280×500×400 4 SVC-8 300×250×450 400×370×560 1
SVC-1.5 220×210×160 280×500×400 4 SVC-10 300×250×450 400×370×560 1
SVC-2 270×240×200 340×300×500 2 SVC-15 410×330×650 520×450×760 1
SVC-3 300×220×250 620×380×350 2 SVC-20 410×330×650 520×450×760 1
SVC-5 470×240×190 540×320×270 1 SVC-30 430×430×1020 660×560×1120 1
SVC-8 580×270×240 690×400×370 1 SVC-45 530×430×1020 660×560×1120 1
SVC -10 580×270×240 690×400×370 1 SVC-60 790×430×1360 900×650×140 1
Three-phase SVC-1.5 400×360×170 520×480×280 1 Three-phase SVC-20 430×510×910 640×550×1060 1
SVC-3 420×380×190 540×500×310 1 SVC-30 430×510×910 640×550×1060 1
SVC-4.5 420×380×190 540×500×310 1 SVC-45 650×130×950 780×550×1100 1 < /p>
SVC-6 370×280×680 480×400×780 1 SVC-60 650×430×950 780×5500×1100 1
SVC-9 350×330×780 480×450×900 1
SVC-15 430×380×730 550× 510×900 1
Selection tips (SVC single-phase, three-phase high-precision automatic AC voltage stabilizer)
1, this series of voltage stabilizers can only be used indoors, please use in accordance with normal operating conditions.
2, this series of three-phase voltage stabilizer input for three-phase four-wire wiring, in the absence of zero can not be used normally, otherwise it will lead to voltage stabilizer damage.
3, in order to ensure that the regulator normal output voltage, current, reduce line power loss, please select the input and output wire cross-sectional area, generally use the copper-core wire connected to the 5A/mm2 calculation, if you choose aluminum-core wire is calculated according to 2.5A/mm2