LCD touch screen copper cable training rack WZ-DCTP121
19-inch single-connected open architecture, external dimensions of not less than 530mm long * 585mm wide * 2000mm high, 220V AC system wiring power supply with leakage protection, tester with a 7-inch LCD touch screen, can be simultaneously 4-way network cable test, can measure 568A line sequence, 568B line sequence and cross line sequence, and test results can be displayed in real color, to maintain the on and off state of each core line, the wrong state of the real color display results; the core components used 7-inch LCD touch-screen network test trainer, 7-inch LCD touch-screen network termination trainer, 4 groups of RJ45 test, 48 groups of termination test, LCD device using an embedded operating system; LCD touch-screen display Cable cross-connection, reverse connection, short circuit, open circuit and other faults, over the network integrated cabling engineering cabling teaching and training system V1.0 can detect the copper cable pass-through; supporting network wiring devices, voice wiring devices, wire devices, data switching devices, can be basic link training and permanent link or channel training; can be carried out at the same time for 2-3 students; this product in accordance with the typical work tasks and key skills training, specially for the Teaching and training tailor-made design, simulation of typical engineering tasks, floor installation, vertical operation, stable and practical.
Training functions:
(1) Copper permanent link installation and termination training, to realize the simulation floor FD-TO permanent link training platform.
(2) can be cabling trunk link termination training.
(3) cabling logo marking practical training.
(4) network, voice training link handover, interconnection mode training.
(5) acceptance testing and positioning techniques practical training.
(6) cabling common faults demonstration and troubleshooting practical training.
(7) cabling training data transmission and printing training
(9) RJ45 crystal head crimping and standard jumper production training.
(10) network information module crimping and telephone information module crimping training.
(11) network rack and equipment installation training.
(12) Telephone exchange system installation practical training.
(13) Workspace subsystem and message port installation hands-on training.
(14) Hands-on training in the installation of management area subsystems.
(15) Each device can be 2-3 people at the same time practical training.
LCD touch screen copper cable training station WZ-DCTP12
Triple open architecture, external dimensions of not less than 1750mm long * 700mm wide * 1800mm high; 220V AC system wiring power supply with leakage protection, tester with 7-inch LCD touch screen, can be 4-way network cable test, can measure 568A wiring. 568B wiring and cross wiring sequence, 568B wiring sequence and cross wiring sequence, and test results can be displayed in real color, to maintain the on-off state of each core line, the wrong state of the real color display results; core components used 7-inch LCD touch-screen network test trainer, 7-inch LCD touch-screen network termination trainer, 4 groups of RJ45 test, 48 groups of termination test, LCD device using an embedded operating system; LCD touch-screen display of the cable cross-connections, anti-connections, Short circuit, open circuit and other faults, through the network integrated wiring project wiring teaching training system V1.0 can detect copper cable pass-through; supporting network wiring devices, voice wiring devices, wire devices, data exchange devices, basic link training and permanent link or channel training; simulation of the workspace training system contains a single-port, dual-port, fiber-optic various types of standard information points, the back of the training table using 6 * 12U pre-bolts Anchor bolt plate to facilitate the simulation of wire troughs and conduits level subsystem wiring and information point wiring; can be simultaneously 4-6 students at the same time training; the product in accordance with typical work tasks and key skills training, specifically designed for teaching and training tailored to simulate typical engineering tasks, floor installation, vertical operation, stable and practical.
Training features:
1, only the second generation of LCD touch screen copper cabling training platform integrated wiring system of various permanent link training. Training instrument and wiring racks, patch panels, patch cords and other combinations, a variety of permanent link termination training, proficiency in termination engineering and operation skills.
2, only the second generation of LCD touch screen copper cabling training platform network module wiring termination principle training. Each termination LCD touch screen with corresponding instructions, visual display of the electrical connection status and line sequence, can be visualized and judged. Cross-connection, reverse connection, short circuit, disconnection and other faults.
3, only the second generation of LCD touch screen copper cabling training platform data center network jumper production and testing training. Measuring 4 network patch cords at the same time, LCD touch screen intuitively display the termination of the electrical connection status and line sequence, to be able to intuitively determine the cross-connection, reverse connection, short-circuit, disconnection and other faults.
4, only the second generation of LCD touch screen copper cabling training platform data center wiring subsystem management cabinet installation and wiring termination technology training.
5, only the second generation of LCD touch screen copper cabling training platform data center level subsystem pipe/slot wiring technology training.
6, only the second generation of LCD touch screen copper cabling training platform data center workspace subsystem network socket installation training.
7, only the second generation of LCD touch screen copper cabling training platform network link test platform function.
8, only the second generation of LCD touch screen copper cabling training platform data center open rack training.
9, only the second generation of LCD touch screen copper cabling training platform to truly demonstrate the complete data center cabling system functions.
LCD touch screen fiber optic cable training rack WZ-DCFC221
19-inch single-connected open architecture, external dimensions of not less than 530mm long * 585mm wide * 2000mm high, 220V AC system wiring power supply with leakage protection, including LCD touch screen fiber optic test trainer with a 7-inch LCD touch screen, used to display the test results, in real-time accurate display of the measured cable system. Results, in real-time accurate display of the attenuation value of the tested fiber at the same time there are icons like the display of the tested fiber pass-through state, support for 850nm, 980 nm, 1310 nm, 1550 nm *** four fiber wavelength selection, detection and testing of fiber optic jumper attenuation and pass-through, able to simultaneously carry out four groups of fiber optic testing; able to carry out the work area sub-systems, horizontal area sub-systems, inter-equipment sub-systems for practical training, Fiber optic link construction; supporting fiber optic wiring device, fiber optic connection coupling device SC/FC, network wiring device, data switching device, can carry out basic link training and permanent link or channel training; all the training functions and test functions are modular design, can be carried out at the same time for 2-3 students at the same time training; this product in accordance with the typical work tasks and key skills training, specifically for teaching and practical training Tailored design, simulation of typical engineering tasks, floor installation, vertical operation, stable and practical.
Product Configuration:
No. Category Technical Specification
1 Model No. WZ-DCFC221
2 Overall Dimension 1.8m in length, 0.6m in width
3 Voltage/Power 220V/50W
4 List of Supporting Items
1 Modular Multifunctional Machine Frame --Modular Multifunctional Rack - 1 set
2. Network Crimping Tester - 1 set
3. 110-type Communication Patch Panel - 2 pcs
4. 24 ports Super Category 5 Unshielded Modular Distribution Frame Frame - 1pc
5.24-port Super Category 5 Unshielded Fixed Port Distribution Frame - 1pc
6.Category 6 Unshielded Module -2pcs
7.LCD LCD touch screen fiber optic tester - 1pc
8.Network cable management ring - 2pcs
9.PDU power outlet --PDU power outlet - 1 (optional)
10. Parts / tools tray - 1
11. Combined fiber optic distribution frame - 2
5 Number of people training Each device can meet 1-2 people training at the same time
6 Training hours 12 hours (RJ45 head and distribution frame termination, jumper test
Training features:
1, network termination and wiring experiments, each termination has a corresponding indicator, intuitively show the status of terminated cable connections and line sequence, can be intuitively displayed and judged across the connectivity, reverse, short circuit, circuit breakers and other faults.
2
2, network jumper production and testing experiments, can measure multiple data jumper at the same time, can intuitively determine the status of cross-connections, reverse connections, short circuits, circuit breakers and other conditions.
3, test link termination and experiment, experiment instrument and network wiring rack, fiber optic wiring rack, communication patch panels, patch cords and other combinations of a variety of test link termination training, simulation of network cabinets within the wiring termination engineering skills.
4, fiber optic distribution frame and the actual engineering completely one to, with SC and ST interfaces, students can master the basic wiring and fiber optic connection skills through practice.
LCD touch screen fiber optic cable training table WZ-DCFC223
Triple open architecture, external dimensions of not less than 1750mm long * 700mm wide * 1800mm high; 220V AC system wiring power supply with leakage protection, including LCD touch screen fiber optic tester with a 7-inch LCD touch screen, used to display the test results in the Real-time accurate display of the attenuation value of the tested fiber at the same time there are icons like the display of the tested fiber pass-through state, support for 850 nm, 980 nm, 1310 nm, 1550 nm *** four kinds of fiber optic wavelength selection, detection and testing of fiber optic jumper attenuation and pass-through, able to carry out simultaneous testing of four groups of optical fibers; able to carry out the work area subsystems, horizontal area subsystems, equipment subsystems training, fiber optic link Build, etc.; supporting fiber optic wiring devices, fiber optic connection coupling device SC/FC, network wiring devices, data switching devices, basic link training and permanent link or channel training; simulation of the workspace training system contains single-port, dual-port, fiber optic standard information points of various types, the back of the training table using 6 * 12U pre-braced anchor plate to facilitate the simulation of the line trough line pipe horizontal subsystem cabling and information point cabling; each of the training functions and test functions are all adopted. Training functions and test functions are all modular design, can be carried out simultaneously 4-6 students at the same time training; over the network integrated cabling engineering cabling teaching and training system V1.0 can be detected on and off the fiber optic cable; this product in accordance with the typical work tasks and key skills training, specifically designed for teaching and training tailored to simulate the typical engineering tasks, floor-to-ceiling installation, vertical operation, stability and practicality.
Training features:
(1) fiber optic permanent link installation and termination training, to achieve the simulation floor FD-TO permanent link training platform.
(2) fiber optic backbone link termination training.
(3) fiber optic practical training link cross, interconnection mode training.
(4) acceptance testing and positioning technology practical training.
(5) fiber optic cabling common faults demonstration and troubleshooting practical training.
(6) Fiber Optic Cabling Practical Training Data Transmission and Printing Practical Training
(7) Fiber Optic Rack and Equipment Installation Practical Training.
(8) Data center workspace subsystems and fiber optic port installation practical training.
(9) Hands-on training on installation of fiber optic subsystems in data center management area.
(10) Each device can be 4-6 people at the same time training.
Product Configuration:
No. Name Unit Quantity
1 Training table backplane 9
2 Fiber Optic Tap Boxes 1
3 LCD touch screen fiber optic test module 1
4 86 single-port panel 1
5 86 double-port panel 1
6 LC fiber optic panels 1
7 SC fiber optic panel 1
8 12-port combined fiber optic distribution frame FC type 1
9 12-port combined fiber optic distribution 1
10 48-port LC fiber optic ODF rack 1
11 ST flange 12
12 SC flange 12
13 LC flange 12<
14 FC flange 12
15 3 m ST fiber optic patch cords 1
16 3 m SC fiber optic patch cords 1
17 3 m FC fiber optic patch cords 1
18 3 m LC fiber optic patch cords 1
19 Horizontal cabling troughs 1
20 Super 5 24-port unshielded distribution frame 1
2121 1
21 Cable Management Racks 2
22 110 Cable Management Racks 1
23 PDU Power Socket 1
24 24-port Network Switch 1
25 Power Cord 1
26 Network Ground Plugs 1
27 Power Ground Plugs 1
28 Training Table Cover 1
29 Training Table Cover 1<
29 Training table column side plate 6
30 Training table base 1
31 Training table top 1
31 Training table over-wire slot 3
32 Table support feet 2
Cloud data center training table WZ-DCFC233
Triple rack type, with the external dimension not less than 1750mm long * 700mm wide. 1750mm long * 700mm wide * 1800mm high; 220V AC system wiring power supply, with leakage protection, including LCD touch screen fiber optic test trainer with a 7-inch LCD touch screen, used to display the test results, in real-time accurate display of the attenuation value of the fiber under test at the same time as there are icons like the display of the optical fiber under test on and off the state of the fiber to support the 850 nm, 980 nm, 1310 nm, 1550 nm, 1550 nm, 1310 nm, 1550 nm *** four fiber wavelength selection, detection and testing of fiber optic jumper attenuation and pass-through, can simultaneously carry out 4 groups of optical fiber testing; can fully simulate the data center main wiring between the MDA, intermediate wiring between the IDA, the centralized optical wiring between the ODF, Intelligent Management DCIM training functions; supporting fiber optic wiring devices, fiber optic connection coupling device SC/FC, fiber optic splice Fiber optic transceiver device, fiber optic basic link training and permanent link or channel training, optoelectronic link conversion training; simulation workspace training system contains single-port, dual-port, fiber optic various types of standard information points, the back of the training table using 6 * 12U pre-supported anchor plate to facilitate the simulation of the trunking line pipe level subsystem wiring and information point wiring; can be carried out at the same time for 4-6 students at the same time practical training; the product in accordance with the typical job Tasks and key skills training, specifically designed for teaching and training tailored to simulate typical engineering tasks, floor installation, vertical operation, stable and practical.
Product features:
1, the product can fully meet all levels of the world's "Network Cabling Competition" race, the intermediate group "network construction and application" and "network cabling The products can fully meet the requirements of the world "Network Cabling Competition", "Network Construction and Application" and "Network Cabling" competitions of the intermediate group, "Computer Network Application", "Information Security Assessment" and "Computer Network Formation" competitions of the senior group, as well as the provincial and municipal "Network Cabling" competitions at all levels. "Network cabling" related skills competition training requirements.
2, the product fully through the authoritative building intelligence "Foluke" link test, and follow the international standard ISO/IEC11801, data center telecommunication base standard TIA/EIA-942, "Data Center Design Code" GB50174-2015, China Engineering Construction Standardization Association CECS 72:97 and CECS 3.0.0. CECS 72:97 and CECS 89:97 and other building intelligence standards.
3, the equipment used in the cloud data center cabling, data center server room actual engineering projects are identical; all the training functions and test functions using modular design, saving future maintenance costs and teaching costs; equipment using open rack design, can meet the 3-5 students at the same time training, convenient for teaching and practical training. Table backplane block 9
8 Power supply ground plug 1
9 Power cord root 1
10 Network ground plug 1
11 7-inch LCD touch screen fiber optic tester 1
12 Information port training module set 1
13 Rack mounted fiber optic transceiver 1
14 8-port splice box 1
15 48-port ODF rack 1
16 96-port optical switching box 1
17 12-port general-purpose fiber optic distribution frame 1
18 24-port general-purpose fiber optic distribution frame 1
19 8-port Terminal Box 1
20 Rack-mounted 8-port PDU 1
21 Red, yellow and black 3-color 1 sq. ft. Power cord (BV) m 1 (each 1 m)
22 M6 screws (hex, including nuts) set 1
23 M4 screws set 1
24 M3 screws set 1
Comprehensive training platform WZ-TSM-04
Consisting of multi-functional screw-hole plate, the simulation wall of all-steel structure, the simulation wall adopts the whole modularization (the inner does not contain wooden stamen plate), easy to assemble and practical training (). Each wall working area of not less than 1.2M wide, not less than 2.6M high, each station can meet the four students practical training, the subsystem module hole plate using a simple, sturdy, beautiful fixed way to facilitate the module replacement, truly a multi-purpose. Each multifunctional mesh board size is not less than 758 × 556mm, thickness is not less than 1.5mm composition, modular and convenient assembly and training teaching; to meet the network integrated wiring engineering cabling various subsystems training function, with simultaneous or cross network integrated wiring engineering cabling system engineering seven subsystems training.
Product features:
1, modular design of the training device, can be arbitrarily combined, large volume, beautiful and beautiful, suitable for a variety of classroom installation.
2, the training device is an all-steel structure, pre-programmed with a variety of network equipment installation screw holes and wiring holes through the wall, highlighting the engineering principles of practical training.
3, the ability to simulate the key technologies of the various subsystems of the integrated wiring project training.
4, able to carry out a variety of wiring routing design and training operations, and training consistency.
5, able to carry out a variety of wire trough or bridge installation of a variety of ways of wiring training.
6, able to carry out a variety of wiring ducts installed in the open or concealed way of installation and wiring training.
7, can be expanded to intelligent management system, electrical engineering technology and other practical training platform.
8, each corner of the area with supporting cabinets, simulated wiring subsystem.
9, cross connectivity layout, the highest utilization rate of the classroom, the highest utilization rate of equipment, the highest cost-effective, the most practical training methods, the best lighting, easy management.
10, the steel structure wall can carry a variety of installation equipment (cabinets, metal trunking, bridges, display boards, etc.), and the load-bearing weight load of cabinets and equipment to do enough redundancy.
Technical Specifications:
No. Category Technical Specifications
1 Model No. WZ-TSM-04
2 Number of Training Groups (at the same time) 4 Groups
3 Number of People Trained (at the same time) 12 People
4 Outer Dimensions Length 2.62 meters
5 Outer Dimensions Width 2.62 meters
6 Outer dimensions Height 2.60m
7 Practical training hours 24 hours
8 Installation mode ten
9 Layout features cross connection layout, the highest utilization rate of classrooms, the highest utilization rate of equipment, the most practical training methods, the highest cost-effective, the best lighting, convenient management.
Training Functions:
1 Workspace subsystem wiring training
The real simulation of the workspace subsystem wiring environment in the building, the following training:
☆ Various types of information boxes, modules, panels, the installation of threading, crimping module training.
☆ Workspace wall of the wire groove, wire pipe installation and fixed training.
☆ Information module - a variety of information equipment jumper production and connection of practical training.
2 Horizontal subsystem installation and wiring training
Real simulation of horizontal subsystems in the building walls, bridges and other parts of the wiring environment, the following practical training:
☆ ☆ a variety of wiring troughs, wiring ducts in the wall of the horizontal fixed installation, threading, connector connection and data cable wiring training.
☆ A variety of cable trunking in the bridge horizontal fixed installation, threading, connectors and data cable wiring training.
3 management room subsystem installation and wiring training
Simulation of the building floor management room subsystem of the wall, bridge, shaft and other parts of the wiring environment, the following practical training:
☆ ☆ a variety of cable troughs, wires in the wall of the horizontal fixing of the installation, threading, joints connection and data cable wiring training.
☆ Wall-mounted information equipment machine installation, cabinet cable rack installation training.
☆ Cabinet wiring rack buried line, cable crimping, playing the number, testing and other practical training.
4 Vertical subsystem installation and wiring training
Real simulation of the walls and shafts of the management of each floor of the building environment, the following training
☆ ☆ a variety of wire troughs, tubes in the shafts or vertical vertical fixation of the building wall, threading and joints connected to the practical training.
☆ Vertical fixing of various galvanized pipes and bundling and fixing of data lines and cables.
5 equipment room subsystem installation and wiring training
Real simulation of each building equipment room environment, the following training:
☆ floor-to-ceiling information cabinet equipment, a variety of switching, routing equipment installation, cabinet cable rack installation training.
☆ Cabinet wiring rack buried line, cable crimping, playing the number, testing and other practical training.
☆ The whole building of all kinds of cable summary, numbering, testing training.
6 building group subsystems installation and wiring training
7, simulation of a variety of permanent link training and testing functions.
8, a powerful expansion function, can be expanded to intelligent management system, electrical engineering technology and other practical training platform.
Copper display cabinet WZ-DCDS-1
2200mm high * 930mm wide * 350mm deep, the equipment needs to be a comprehensive display of integrated wiring project commonly used copper cables, network modules, panels, distribution frames and accessories.
Product features:
1, combined board structure, upper display cabinets, lower storage cabinets.
2, rail mounted display board + tempered glass door structure.
3, Tempered glass door, screw fixed, safe and strong.
4, supporting all equipment name labels and uses, easy to recognize and learn. With the comprehensive wiring project is completely consistent with the commonly used copper cables, easy to recognize and learn.
Optical cable display cabinet WZ-DCDS-2
Equipment needs to be fully demonstrated in the comprehensive cabling project commonly used optical cables, a variety of optical patch cords, flanges, optical modules and accessories.
Product features:
1, the upper and lower combined board structure, the upper display cabinet, the lower storage cabinet.
2, rail mounted display board + tempered glass door structure.
3, Tempered glass door, screw fixed, safe and strong.
4, supporting all equipment name labels and uses, easy to recognize and learn. With the comprehensive wiring project is completely consistent with the commonly used fiber optic cable, easy to recognize and learn.
Tools display cabinet WZ-DCDS-4
Equipment needs to be fully demonstrated in the integrated wiring project commonly used commonly used J45, RJ11 construction tools.
Product features:
1, the upper and lower combined board structure, the upper display cabinet, the lower storage cabinet.
2, rail-type pendant display board + tempered glass door structure.
3, Tempered glass door, screw fixed, safe and strong.
4, supporting all equipment name labels and uses, easy to recognize and learn. With the comprehensive wiring project is completely consistent with the common tools, easy to recognize and learn.
Auxiliary materials display cabinet WZ-DCDS-5
Equipment needs to be fully demonstrated in the integrated wiring project commonly used commonly used trunking, conduit and other accessories.
Product features:
1, the upper and lower combined board structure, the upper display cabinet, the lower storage cabinet.
2. All-steel multifunctional screw-hole display board + tempered glass door structure.
3, Tempered glass door, screw fixed, safe and strong.
4, supporting all equipment name labels and uses, easy to recognize and learn. With the comprehensive wiring project is completely consistent with the common auxiliary materials, easy to recognize and learn.
Fiber optic fusion splicer WZ-520
Color LCD display, while observing the X-axis, Y-axis direction of the fiber
Fiber magnification is large, the core is clearly visible
Multiple core alignment: core alignment, cladding alignment, manual alignment
9 seconds fusion splicing time, 30 seconds of heating time
A wealth of Operation interface, internalization, intelligent menu design
Deep concave windproof cover, in the 15m/s strong wind can be spliced
5000m sea dial height, to ensure the quality of fusion splicing in the plateau region
Typically 300 times the cycle of operation
Fiber Optic Thermal Fusion Toolbox WZ-TC01
Comprehensive wiring cabling complete set of teaching, competition, practical training tools. Toolbox using aluminum shell and arc profile, the internal settings have a special molding liner fixed tools, reliable, easy to access. Contains products: dual-port fiber optic stripping pliers 1, Luo Ping Han 1, Kevlar scissors 1, optical cable loose sleeve stripper 1, steel wire cutters (7 inches) 1, diagonal pliers (6 inches) 1, activity wrench (8 inches) 1, fiber optic cable core cutting pliers 1, 18 pieces of combination of screwdrivers 1 set of enhanced toolbox 385 * 275 * 110MM 1, fiber optic cable transverse stripping knife 1, precision clocks and watches Screwdriver set 1 set, a new type of alcohol pump with lock 1, blowing a balloon also clean brush 1, high brightness flashlight 1, precision regents 1, practical electrician's knife 1, 3.5 m tape measure 1, black marker 1 .
Fiber optic cold splicing tool box WZ-TC02
Fiber optic cold splicing complete set of teaching, competition, practical training tools, including at least fiber optic stripping pliers, red light pen, fiber optic cutting knife and other 10 kinds of tools. Toolbox using aluminum plate shell and arc profile, the internal set of special molding liner fixed tools, secure, easy to access. Contains products: optical power meter red light pen 1 set, cutting knife 1 set, no layer of paper 1 bag, tool box 1 set, double mouth Miller pliers 1, leather wire stripper 1, guide strip 1 set, alcohol pump 1, storage box 1 set, adjust the knife tool 1 set, Kevlar scissors 1, vise 1, diagonal pliers 1, art knife 1, red light pen pen bag 1.
Copper toolbox WZ-TC03
Comprehensive wiring cabling full set of teaching, competition, practical training tools. Toolbox using aluminum shell and arc profile, the internal set of special molding liner fixed tools, reliable, easy to access. Contains products: 1 set of toolbox, vise 1, diagonal pliers 1, sharp-nosed pliers 1, art knife 1, cutting knife 1, wire channel cutter 1, bender 1, 3m steel ruler 1, a screwdriver 1, a screwdriver 1, cross screwdriver 1, stripping knife 1, playing line pliers 1, five pairs of playing line pliers 1, through the breakage of the tester 1, 9V batteries 1 medium, cable stripping pliers 1, dual-use network crimping pliers 1.
Human ladder WZ-TL03
Product size: 157 * 83 * 52.5cm; storage size: 166 * 52.5 * 5cm; product weight: 150kg; product description: soft rubber non-slip handrail, handrail lengthening, ascent safety, software handrail handholding comfortable to prevent skidding, orange metal pedal connection, pedal and bracket with the use of plastic metal and connection doubly stable and durable. Connection doubled solid and durable, the back of the use of cross-strengthening bracket to improve stability, look like the front to add a reinforced crossbar, doubling the stability, soft horseshoe rubber cover, does not hurt the floor, the bottom of the non-slip groove to use peace of mind.
Pipe storage rack WZ-PR02
Color: white; Size: 200 * 60 * 200 * 4; Product Description: Column 75mm * 35mm * 0.8mm C-channel steel, beam 60mm * 40mm * 0.8mm P-type steel pipe, laminate 0.4mm cold-rolled steel, medium 150-200 kg per layer (flat bearing, can not be). is single-point load-bearing, the longer the specification the smaller the load-bearing), can be freely adjusted up and down, butterfly hole installation is more convenient, there are cards on the beam, directly stuck in the butterfly hole of the column, easy to install, do not need any screws.
WZ-OF04
Dimensions: 1200 * 600 * 800, 50MM composite countertop, the top 3MM polymer rubber skin, the substrate density board, glued and hot-pressed, bearing 1000 kg, the steel frame part of the selection of high-quality cold-rolled Baosteel, thickness 1.5MM, 6 bending and become the beam reserved for fixed cabinets hanging cabinet holes, easy to install and use, the steel frame reserved for fixed cabinets hanging cabinet holes, easy to install and use, the steel frame. Convenient to install and use, steel frame reserved 5-hole socket holes, steel frame surface 9-station pre-treatment after epoxy electrostatic spraying, coating adhesion, corrosion resistance, smooth and delicate, not easy to fall off, in order to prevent the ground is not flat, the bottom of the addition of adjustable feet, to facilitate the improvement of the ground unevenness caused by the unevenness of the problem.
Comprehensive wiring 3D simulation teaching platform WZ-3DTPV1
Main structure diagram:
Platform Overview:
Weizhong comprehensive wiring 3D simulation of the real training platform, is based on the reality of the computer network integrated wiring project, the use of 3D virtual reality technology, relying on the 3D virtual Unity platform through the simulation or restoration of the reality of the structured wiring project. Structured cabling project to build a virtual 3D three-dimensional engineering scene. Students can personalize the 3D virtual body, in a three-dimensional virtual environment throughout all the details of the structured cabling, image realistic, detailed and vivid.
At the same time, the platform is based on the idea of "Internet + business practice", which is a set of "teaching. The platform is a set of "teaching. Do" as one of the concepts, to the general, relatively standard modern building integrated wiring project construction as the core, virtual 3D engineering scene, the function covers the building integrated wiring system subsystems.
Product features:
1, to provide a complete set of 3D virtual simulation teaching system, can be seamlessly integrated with the integrated wiring teaching and training system;
2, the use of multimedia technology means, provides a wealth of teaching resources, to facilitate the learning of teachers and students;
3, for the integrated wiring system to carry out a comprehensive 3D simulation, the focus of the simulation of our training room or base in the training. Training room or training base can not provide integrated wiring training teaching scenes for intuitive system presentation, to provide students with 3D production body scene training guide;
4, the platform provides assessment functions, to realize the automatic examination, reducing the workload of teachers;
5, by a wealth of experts in experimental teaching and learning to elaborate typical cases, can develop learners' design and innovation ability;
6, the organic integration of knowledge learning and experimental hands-on training, the formation of a complete practical training teaching system;
7, the virtual scene can be presented in real items can not be reflected in the project scene, to improve the safety of going to the scene of practical training;
8, the use of game-style interface friendly and intuitive, all the simulation equipment close to the operation of the actual, strong sense of reality;
9, Strong scalability, according to the teaching needs of the flexible addition of experimental equipment, typical experiments, test tasks, to provide personalized customization services;
10, integrated wiring course to follow the international project standards, to provide a more flexible way than in the laboratory for practical training simulation.
Platform picture:
Software first interface
Basic Knowledge Module
Basic Skills Module
Project Practice Module
Process Examination Module
Product Warehouse Module
Platform Functionality Overview:
1, the basic structure of the integrated wiring
Integrated Cabling workspace knowledge
Comprehensive cabling wiring (horizontal) subsystem knowledge
Comprehensive cabling trunk (vertical) subsystem knowledge
Comprehensive cabling equipment room subsystem knowledge
Comprehensive cabling feeder room subsystem knowledge
Comprehensive cabling management subsystem knowledge
Comprehensive cabling building group subsystems Knowledge points
2, integrated wiring project practice
Copper cabling knowledge
Optical cabling knowledge
3, integrated wiring skills
Cable connector knowledge
Cable into the end of the knowledge
Cable auxiliary materials installation knowledge
Cable labeling knowledge
4
Comprehensive wiring product awareness
Comprehensive wiring practical cable knowledge
Comprehensive wiring practical connector knowledge
Comprehensive wiring practical auxiliary material knowledge
Refer to the standard
GB 50311-2007 comprehensive wiring system engineering design specification
GB 50312-2007 comprehensive wiring System Engineering Acceptance Specification