1, power on: before use, first make sure that the power supply is connected, the equipment is off state. Put the sample into the filling bottle and put the filling bottle into the sample holder, and then insert the sample holder into the equipment.
2. Parameter setting: Set the processing program and heating parameters on the control panel of the device, including temperature, time, power and other parameters, according to the type of sample and the purpose of processing.
3, start the processing program: after the parameters are set, press the "Start" button to start the program, the device begins to work, the sample will be heated, digestion and other processing.
4, monitoring the processing: in the sample processing, you can control panel or observe the processing in the window to monitor the sample processing.
5, the end of the treatment program: processing is complete, press the "stop" button to stop heating, the sample will be taken out of the device for subsequent operations.
It should be noted that the use of microwave microwave sample processing system before the use of the United States Cheng, be sure to fully understand the basic use of equipment and safety precautions to avoid causing accidents.