The company has its own brand: JDCM (Jiangda Machinery).
The main product categories are: JDEL series of bucket elevator, JDMS series of scraper conveyor, JDMC series of curved scraper conveyor, JDSC series of screw conveyor, JDJBC series of single-roller belt conveyor, JDBC series of single-roller belt conveyor, JDBSU series of three-roller belt conveyor, JDDQ series of bridge-type stacker, JDBSD JDBSD series belt conveyor, JDDQ series bridge stacker, JDBSD series belt conveyor and other conveying equipment. JDEL Series Bucket Elevator:
1. The head pulley adopts rubber-coating process, which increases the friction series, prevents the belt from skidding and deflection, and improves the driving efficiency.
2, the seat adopts gravity tensioning form, the tail wheel adopts spoke type self-cleaning structure, effectively preventing the material from adhering to the wheel surface and affecting the lifting effect.
3, the head is equipped with a backstop device, which can prevent the blocking phenomenon caused by the reversal of the lifting belt due to the emergency stop.
4, the dustpan adopts high strength plastic dustpan, which has the advantages of high strength and large filling coefficient.
5, all parts subject to material impact are equipped with removable polymer wear-resistant liner.
6, equipped with maintenance door, observation window, dust suction outlet, with speed measurement, run-off, anti-blocking and shaft temperature detection and other safety protection devices.
7. The machine has beautiful appearance, large lifting capacity, good sealing performance, long service life, low energy consumption and low material breakage rate.
8, widely used in ports, wharves, silos and other large tonnage, ultra-high granular, powdery materials vertical conveying. JDMS Series Scraper Conveyor:
1. The chain adopts high-strength welded curved plate chain, and the axle pin, chain plate and scraper have been specially treated, which has the characteristics of high strength and good wear-resisting performance.
2. The scraper is equipped with special ultra-high polymer wear-resistant material, which avoids direct friction between the conveyor chain and the scraper shell, effectively reduces the operating noise and extends the service life of the equipment.
3, equipment cover, bottom plate, side plate are removable structure, in order to facilitate maintenance, replacement.
4, the tail is set with fixed guide rail tensioning device, less failure rate, good sealing, easy to operate, so as to facilitate maintenance and replacement.
5, simple structure, flexible process arrangement, can be multi-point feeding or discharging.
6, equipped with maintenance port, observation window, dust suction outlet, with speed measurement, anti-blocking and shaft temperature detection and other safety protection devices.
7, the whole machine has beautiful appearance, large conveying capacity, good sealing, long service life, low energy consumption and material breakage rate.
8, widely used in ports, wharves, silos, etc. Horizontal or inclination angle of less than 15 ° of a variety of granular, flake and powder materials, large-tonnage, long-distance material transportation. JDMC series curved scraper conveyor:
1, the chain adopts high-strength welded curved plate chain, the axle pin, chain plate, scraper after special treatment, has the characteristics of high strength, good wear resistance.
2. The scraper is equipped with special super-strong polymer wear-resistant material, which avoids direct friction between the conveyor chain and the scraper shell, effectively reduces the operating noise and extends the service life of the equipment.
3. The tail is equipped with fixed guide rail type tensioning device, which is easy to operate with small failure and good sealing performance.
4, simple structure, flexible process arrangement, can be multi-point feeding and single-point discharge head.
5, equipped with maintenance port, observation window, dust suction port, with speed measurement, anti-blocking and shaft temperature detection and other safety protection devices.
6, the whole machine has beautiful appearance, large conveying capacity, good sealing performance, long service life, low energy consumption and material breakage rate.
7. It is widely used for conveying various granular, flaky and powdery materials at an inclination angle of 0～90°. JDSC series screw conveyor (winch):
1, screw conveyor is divided into two series, one is the "half-circle" type that is ordinary screw conveyor, the other is the "full circle" type that is the tubular screw conveyor, the screw blade has a left-hand, right-hand and equal pitch and variable pitch. Equal pitch and variable pitch points.
2. The shell is molded as a whole, and the blades are pressed as a whole, which fully guarantees the equality of pitch and the consistency of concentric angle.
3, the middle hanging structure adopts ultra-high polymer wear-resistant material combination, its wear resistance can be up to seven times that of steel, no oil lubrication is needed during operation to avoid material contamination.
4, equipped with maintenance port, observation window, dust suction port, and can be equipped with anti-blocking door, off the bottom of the cleaning door and other auxiliary structures according to user requirements, with speed measurement, anti-blocking and shaft temperature detection and other safety protection devices.
5, the whole machine has beautiful appearance, good sealing performance, long service life, flexible process arrangement, and can be multi-point feeding and multi-point discharging.
6, widely used in a variety of granular, flaky and powdery materials horizontal, inclined or vertical conveying. JDJBC series air cushion belt conveyor:
This series of products has the advantages of fewer failure points, good sealing effect, long service life, large conveying output, smooth and reliable operation, low energy consumption, etc.; the equipment is sealed throughout the whole process, which is especially practical for conveying environmentally demanding logistics places, and the transmission parts are all external, which is convenient for overhauling and maintenance. The head pulley adopts rubber-coating process to increase the friction coefficient, prevent the belt from slipping and deviating, and improve the transmission efficiency, and the active pulley, passive pulley, and tensioning pulley have been tested by static balance and dynamic balance.
2. The head is equipped with a special scraper cleaning device to ensure that all conveyed materials can be discharged into the head hopper; in the head of the tape from the air chamber into the drive roller, in order to prevent the material overflow, there is a logistics guide device in the appropriate part; the tail return tape is equipped with the top of the V-shaped cleaner, in order to clean the conveyor belt unloaded section of the material.
3, the bearing (material) layer and the return (unloaded) layer adopt unique air cushion structure, due to the upper and lower structural form is basically the same, so the equipment can be operated with greater flexibility, the upper and lower conveyor belt are in a sealed state, so it is especially suitable for cold and southern high humidity rainy areas, and effectively prevent condensation.
4. The tail adopts sealed self-cleaning material return device, which fundamentally solves the problem of material accumulation in the tail to achieve the sealing effect of the whole equipment.
5. The feeding mouth is equipped with adjustable buffer plate, so that the material can be centered when it falls on the conveyor belt and reduce the impact of the material on the tape, and there are adjustable rubber plates on both sides of the feeding chute to prevent the leakage of the material.
6, in the total length of the conveyor set up independent air supply section, in order to reduce the impact of the air flow, and to avoid the pressure loss caused by the long conveying distance, in each air supply section appropriate position with a relief valve, in order to leak the excess gas to ensure that the belt does not float; adjacent to the two chambers using plug-in joints, in order to reduce the joints of the chamber profile of the surface of the height of the error.
7. The head and tail of the conveyor are equipped with unique built-in elastic anti-deviation devices; the tail is equipped with a proprietary pressure balancing structure.
8, according to the length of the equipment and the use of conditions, can be used in a unique closed retractable screw tensioning mode, fixed guide rail gravity tensioning mode and slide trolley gravity tensioning mode, and is equipped with a tensioning limit device.
9, equipped with access ports, observation windows, dust suction port, with speed measurement, deflection, anti-blocking and shaft temperature detection and other safety protection devices.
10, widely used in ports, wharves, silos and other large-tonnage, long-distance horizontal or inclination angle of less than 15 ° of a variety of granular, flake and powder materials conveyor. It can be used singly or in multiple units or other conveying equipment to form a horizontal or inclined conveying system. JDBC Series Single Roller Belt Conveyor:
This series of products has the advantages of fewer faults, low noise, long service life, smooth and reliable operation, multi-point feeding or unloading, low energy consumption, etc.; the equipment is sealed throughout the whole process, which is especially useful for the logistics places with high requirements for the conveying environment, and the transmission parts are all external, which is convenient for overhauling and maintenance, and the specific features are as follows:
1.
1 The head wheel adopts rubber-coated process to increase the friction coefficient, prevent the belt from slipping and deviating, and improve the transmission efficiency. The active roller, passive roller and tension roller have been tested by static balancing and dynamic balancing, and there is a special "plough"-type material clearing device at the exit to ensure that the conveyed material can be discharged into the head hopper, and there is a "V"-type material clearing device at the top of the tail return tape. There is a "V"-shaped sweeper on the upper part of the tail return belt to clean the materials on the cut-off section of the conveyor belt.
2. The load layer adopts dumbbell type single roller structure, and the transmission parts are placed outside to facilitate maintenance; the return journey adopts the structure without roller, and the upper and lower conveyor belts are isolated from the outside world, which is effective in preventing dust.
3. The tail adopts sealed self-cleaning material return device, which fundamentally solves the problem of accumulating materials in the tail, so as to achieve the effect of dust sealing in the whole process of the equipment.
4. The feeding mouth is equipped with adjustable buffer plate to make the materials pile up centrally when falling onto the conveyor belt and reduce the impact of materials on the tape, and there are rubber baffles on both sides of the feeding chute to prevent the materials from leaking.
5, the bottom plate and the side plate and the conveyor belt contact parts are set with ultra-high polymer anti-static, wear-resistant liner, effectively extend the service life of the equipment.
6. The head and tail of the conveyor are equipped with unique built-in (conveyor belt) elastic anti-bias device.
7. According to the length of the equipment and the use conditions, the unique closed telescopic screw tensioning mode, fixed rail gravity tensioning mode and slide rail trolley gravity tensioning mode can be used, and there is a tensioning limit device.
8, equipped with maintenance port, observation window, dust suction port, with speed measurement, anti-blocking and shaft temperature detection and other safety protection devices.
9, widely used in ports, wharves, silos and other large tonnage, long distance horizontal or inclination angle of less than 15 ° of a variety of granular, flake and powder materials conveyor. It can be used as a single unit, or multiple units or with other conveying equipment to form a horizontal or inclined conveying system. JDBSU series three-roller belt conveyor:
This series of products are divided into two structural forms, one is "open" structure, the other is "semi-closed" structure. This equipment has the advantages of simple structure, good sealing effect, large conveying capacity, long conveying distance, multi-point feeding or discharging, stable and reliable operation, low energy consumption and cost, etc. The specific features are as follows:
1. The head wheel adopts rubber-coating process, which increases the friction coefficient, prevents the belt from slipping and deflecting, and improves the transmission efficiency, and the active roller, the passive roller, and the tensioning roller have been tested by static balance and dynamic balance.
2. The head exit is equipped with a special "plow" type material cleaning device to ensure that all the conveyed materials can be discharged into the head hopper, and the tail return tape is equipped with a "V"-shaped cleaner, so as to clean the materials in the unloaded section of the conveyor belt.
3, the bearing layer adopts grooved three-roller structure, the groove angle is divided into 30 °, 35 °, 45 ° three kinds of groove angle, the larger the groove angle, the higher the conveying yield. The feeding place adopts called spacing buffer grooved three rollers, in order to prevent the conveyor belt from deviation, the middle section is equipped with centering grooved three rollers and centering parallel lower rollers every 10 groups.
4, the feeding mouth is equipped with adjustable street buffer baffle, so that the material can be centered when it falls on the conveyor belt and reduce the impact of the material on the tape, and there are rubber baffles on both sides of the feeding groove to prevent the leakage of the material.
5, according to the length of the equipment and the use of conditions, can be used in the screw tensioning mode, fixed guide type gravity tensioning mode and slide rail trolley type gravity tensioning mode, and there is no tensioning limit device.
6, equipped with maintenance port, observation window, dust suction outlet, with speed measurement, anti-blocking and shaft temperature detection and other safety protection devices.
7, widely used in ports, wharves, silos and other large tonnage, long distance horizontal or inclination angle of less than 15 ° of a variety of granular, flake and powder materials conveyor. It can be used singly or in multiple units or other conveying equipment to form a horizontal or inclined conveying system. JDDQ series bridge type bale stacker:
This product is a new generation of conveying equipment designed, developed and developed by our company. After measuring and packing the bulk finished products, the finished products will be transported to the corresponding gathering conveyor through the sewing bale conveyor, and then the finished bags will be transported to the corresponding gathering conveyor through the role of bale stacking unit to realize the whole process of mechanized conveying and stacking of finished products from packing to stacking of bales, which is of beautiful appearance, smooth operation, easy operation, low failure rate, and easy to operate. The whole machine has the advantages of beautiful appearance, smooth operation, easy to operate, low failure rate, easy maintenance, etc. The specific features are as follows:
1, the big traveling car of the bale stacking machine can walk along the length of the warehouse, the bale stacking trolley can walk along the width of the warehouse, and the slippery bale trolley can be lifted and lowered, and can be rotated around the trolley to do 270 ° (the actual slewing angle of 360 °, but taking into consideration of the practicability of the equipment, the positioning in the actual installation of 270 °), thus through the main conveyor to enter the stacking of bales on the gathering conveyor. Thus, the finished products entering the bag stacker through the main conveyor can be designated for operation at any point in the whole warehouse, and the utilization rate of the warehouse can reach 100%.
2, traveling car in line with national quality norms, no collapse, trembling, movement jitter phenomenon, no deformation occurs after use.
3, lifting the trolley using Jiangda's proprietary hydraulic brake control, to avoid control hysteresis due to the trolley's gravity.
4, JDDQ large-span palletizer (double beam) is self-propelled and starts frequently, specially set up JD's proprietary starting and walking mechanism, which effectively reduces the noise at the moment of starting and prolongs the service life of the equipment.
5. The bending structure is specially treated, so that when the bag passes through the bending mechanism, it is natural and smooth, without hanging, blocking and stagnation, etc. The whole conveying line is stable, safe and reliable.
6, through the electrical control system and computer control system to complete the whole mechanized operation.
7, widely used in grain, mining, metallurgy and other industries, finished bag transportation and stacking operations.