The translational magnetic polishing machine is the use of ultra-strong electromagnetic force, conductive fine grinding stainless steel needles, produce high-speed flow, such as the action of the head, in the workpiece bore, the surface friction, in order to achieve the polishing, cleaning, removal of burr, and other precision grinding effect.
Second, the advantages of this machine
1, throw small pieces because there is no center and around the blind spot, a single time can greatly increase the processing weight, polishing out of the product as usual is very uniform, more efficient.
2, throw large pieces of high uniformity, including brightness and sand surface, deburring uniformity and high. (The reason is that the large pieces are too big can not be free to roll)
3, translational magnetic grinder in the original round basis, because the left and right back and forth movement, greatly increasing the length of the magnetic field area, suitable for throwing longer products. (More suitable for throwing tubes, block-shaped products. (Such as: laptop computer chassis)
4, hardware jewelry crafts, electronic instruments and meters and other precision parts into electronic instruments and meters and other precision parts finished products, removing burrs, chamfering, polishing products, removing burrs, chamfering, polishing, washing, and other precision grinding work is completed at once. Only 5-15 minutes can be completed without damaging the precision of the workpiece! Irregular-shaped parts, holes, tubes, dead ends, crevices, etc. can be ground and processed.
5, grinding speed, with double processing groove replacement workpiece fast, can be exchanged in the machine running grinding parts.
6, simple operation, absolute safety, one person can operate several machines.
7, low cost, stainless steel needle for semi-permanent grinding material, consumption is very low, consumables for grinding liquid.
8, the grinding fluid is pollution-free, so there is no toxicity and the risk of fire, in full compliance with environmental emission standards.
9, grinding is completed, can be used sieve, sieve tube, electromagnetic force, or separation of the workpiece and stainless steel needle separation easily.
10, stainless steel needle diameter 0.2-5MM to 1.2-10MM can be selected. ~@ShengYa