What machines are needed to make injection molds? And what tools?

The most basic need, injection molding machine, lathe, milling machine, grinding machine, drilling machine, spark machine. To complete the case, but also, computer gong, fast walking wire, slow walking wire, punching machine, 3D measuring instrument, argon arc welding.

Tools, then more, calipers, height gauge, depth gauge, workbench and so on.

1, in the injection molding machine heating before starting production to open the cooling water valve, observe whether the waterway is smooth.

2, close the power switch on the side of the control box, turn on the power supply in the machine, press the motor start button on the panel to start the oil pump motor.

3, the first time you use and longer unused injection molding machine, the oil pump start, we must first carry out a few minutes of empty running, before you can start to operate.

4, open the injection molding machine barrel heating switch, turn on the electric power supply, adjust the door on the thermostat mouth and temperature controller, temperature setting, observe the size of the ammeter current, in order to determine the good and bad of the electric heating circle.

5, the injection molding machine trial should be carried out from manual → semi-automatic → automatic in turn, at the same time should check whether the important fastening bolts are loose, found abnormalities should be stopped immediately. When the confirmation of normal or troubleshooting, and then test drive.

6, processing stops or change the material cylinder cleaning, cleaning should be carried out in the cylinder heating conditions, cleaning, immediately turn off the heating switch, cleaning work is particularly important for the processing of easy to decompose plastic.

Note: ① cleaning note seat to be returned

② two kinds of raw materials alternating temperature settings should be adjusted according to the requirements of the high melting material

③ polystyrene cleaning decomposition of the material

7, processing stops, the first action switch to the manual position, the other action switch is placed in the position of the disconnection of the OO, the cylinder heating switch is set to OFF, and then press the motor stop button to turn off the oil pump motor. Press the motor stop button to turn off the oil pump motor, and finally turn off the power switch to end the work.