1. Cartridge blockage: when the water flow becomes smaller or stops flowing in the middle, it is likely that the cartridge is blocked. At this time you need to replace the cartridge, or cleaning of the cartridge.
2. Water quality deterioration: If the water quality deteriorates, it is possible that the water pressure or water temperature is unstable. You can check whether the water pressure and temperature are normal, if normal, you need to replace the cartridge or upgrade the cartridge to improve the filtration effect of pure water.
3. Leakage: Leakage is one of the common failures of the water purifier, may be the product internal line short circuit. The solution is to first turn off the power switch of the water purifier, and then check the product for damaged power lines and replace them.
4. Leakage: Leakage is also a failure of the water purifier, may be a loose water pipe connection, or wear and tear fittings. The solution is to check whether the water pipe connection is loose, if loose need to reconnect. If the fittings are found to be badly worn, they need to be replaced with new ones.
5. Can not be turned on: when the water purifier can not be turned on, it is likely that the power line has a problem. The solution is to check whether the power line is connected normally, if normal, it may be the product internal damage, you need to contact professional technicians for repair.
The water purifier helps us solve a lot of drinking water problems in our daily life. However, if there is a malfunction you need to repair it in time to ensure the normal operation of the equipment and the safety of drinking water.