If the inner hole of the latex tube becomes sticky after heating and external treatment, it may cause quality problems, subsequent process problems, formula dosage problems, etc.
The inner hole of the latex tube becomes sticky after heating and external treatment
1. Check whether there are any problems in the production process of the latex tube
2. Caused by aging resistance;
3. Problems occurred in the post-process;
4. The dosage of various additives in the formula was improperly used.
A latex tube extrusion former that opens the inner hole of the core tube straight through. The isolating agent or coating material can be injected into the inner hole of the core tube, thereby flowing into the inner wall of the latex tubular gel, forming an isolation or coating layer, so that the inner wall of the latex hose does not stick to each other, eliminating the need for additional anti-adhesive processing, reducing the production process, and improving the quality of the hose. A heating object can also be inserted into the inner hole of the core tube to heat the core tube to facilitate the heated gelling and molding of the latex. The utility model is composed of an outer tube and a core tube. The outer tube is provided with a latex inlet, and a core tube is provided inside the outer tube. The inner hole of the core tube is open at both ends. The utility model belongs to key equipment for producing latex hoses, which are widely used in medical, fitness and other fields.