Guangzhou drinking fountain cleaning cleaning company Drinking fountains should be how to clean

According to the relevant environmental health monitoring department testing shows that the barrel drinking fountains within the hot and cold water gallons three months without washing will be a large number of breeding bacteria, viruses, sediment residues, heavy metals and even sins of the red bugs, a serious danger to people's health.

Drinking fountains are usually barrels of water after the barrel neck upside down on the water dispenser's "smart seat", and then by the machine's hose will be the water into the two gallons, one of which is the hot water gallon, a cold water gallon, the two gallons in addition to play a role in the function of the hot and cold water, which can also play a role in precipitating impurities in the water. People usually repeat the replacement of barrels of water, but ignored the inner liner of the water dispenser still have a certain amount of water, which will hide the water of disease-causing bacteria, over time, naturally become a breeding ground for bacteria. Consumers have such a misunderstanding of the water dispenser itself is a water purification device, barrels of mineral water and clean, even if the water dispenser is not regularly cleaned, disinfected there will be no problem, so the water will appear a variety of foreign bodies.

So, the water dispenser must be thoroughly cleaned and disinfected on a regular basis, the current common method is to use disinfectant water to clean, and then use clean barrel water to flush the water dispenser until the disinfectant residue is washed.

Cleaning water dispenser steps:

1. Cut off the power supply of the water dispenser;

2. Insert a 5-gallon water bottle vertically downward into the smart seat of the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until there is water to be released after the closure of the faucet, and then use both hands to hold the bottle upward to take out the bottle;

3. Clean the exterior of the water dispenser and the smart seat;

4. Pour 600ml of special cleaning and disinfecting solution into the water storage tank;

5. After 10 minutes, turn on the red and green faucets until the disinfectant solution is discharged;

6. Turn on the back of the machine or the bottom of the discharge valve will be the disinfectant inside the water dispenser to drain out;

7. Repeatedly rinsed several times with boiled or purified water;

8. Tighten the valve to discharge the disinfectant Sterilization operating procedures to complete the "reproduction"