Familiar with the equipment structure, technical performance and operation method, familiar with the processing technology, correct use of tooling, do not overload the equipment.
Be familiar with the position of oil hole, oil hole and oil cup of the equipment, and know the oil quality, oil quantity and oil change cycle of the operated equipment; Lubricate and cool the equipment as required; There is no oil stain, dirt, rust, scratches, oil leakage, water leakage, electricity leakage and air leakage inside and outside the equipment; The control system is sensitive and reliable, and the equipment is clean.
Familiar with the precautions, basic knowledge, accuracy standards and inspection items of equipment inspection; Skillfully apply and check whether the instruments, meters, measuring tools and testing tools of the equipment are normal.
On the basis of being familiar with equipment performance, general principle and component combination, can identify abnormal sound and abnormal situation of equipment, judge abnormal parts and causes of equipment in time, and eliminate general faults; In case of equipment failure or accident, emergency treatment can be carried out to prevent the accident from expanding, and timely report to the relevant departments to check and analyze the reasons and take corresponding measures.
Equipment operating procedures:
The content of equipment operation regulations is to stipulate the items, procedures and actions that operators must abide by in the whole operation process according to the structural operation characteristics of equipment and the requirements of safe operation. Generally includes the following contents:
1. Contents and requirements of site cleaning and equipment status inspection before equipment operation.
2, operating equipment must use instruments.
3. Main parameters of equipment operation.
4. Causes and troubleshooting methods of common faults.
5. Initial operating procedures and precautions.
6. Lubrication methods and requirements.
7. Specific requirements for daily inspection and maintenance.
8, downtime procedures and matters needing attention.
9, the use of safety protection device and adjustment requirements.
10, specific work and record contents of handover and succession.