Correct use of commonly used protective equipment and precautions:
One, the correct use of helmets and precautions: cushioning liner elasticity adjusted by the band, the top of the cap liner to the top of the cap shell of the vertical spacing of the inner surface, the plastic liner must be greater than 30 millimeters; the use of the helmet, don't wear the helmet crooked in the back of the head, otherwise it will reduce the protective effect on the impact; in the process of using the safety helmet. In the process, always fasten the cap band tightly to prevent the helmet from falling off due to loosening; the helmet should be inspected regularly and should be replaced immediately if it is found to be cracked, concave, split or seriously worn; the helmet should not be used as a stool.
Two, the correct use of safety belts and precautions:In the use of safety belts, should check whether the components of the safety belt is intact, there is no damage; safety rope whether there is a broken strand, the phenomenon of scalding; safety belts; shall not be hanged on the free end of the pipe fittings, safety net.
Three, protective masks (masks) the correct use of methods and precautions: use should be based on the concentration of dust in the air, respectively, the use of compound or simple dust masks; the use of gas masks, should be based on the different toxic environments to choose the appropriate model, the performance of the canisters; the selection of dust, gas masks must be identified by the state designated departments to meet the technical requirements and obtain a production license can be used; air-supplied respiratory protective equipment. Use; air supply type respiratory protective equipment, use should pay attention to the catheter and mask combination of airtight, and the middle part of the catheter should not be joints.
Four, the correct use of protective gloves and precautions: according to different operations and protective requirements of the corresponding protective gloves; wear all kinds of gloves, do not let the wrist exposed, so as not to make welding sparks or agent splash into the sleeve; insulation, health protection gloves before each use to double-check the reliability and ensure the safety of use; should be cleaned in a timely manner after use, and properly stored. Insulating gloves should also be regularly rechecked its voltage strength; operation of machine tools and with the danger of pinching and squeezing the operation, the operator is prohibited from using gloves to avoid being entangled in the machine or clamped and cause accidents.
Fifth, the correct use of labor insurance shoes and precautions: according to the different operating conditions and protection requirements, the choice of suitable protective performance of the protective shoes, especially for the special requirements of the workplace, be sure to wear according to the requirements; the size of the protective shoes should be suitable for the foot, wear up to feel comfortable, so as to avoid affecting the operation of the times to be the harm order.