Cooking oil recycling requires a government-issued hazardous waste license, waste oil treatment license, and waste oil permit. There may be different local regulations, and consult your local Trade and Industry Bureau and Environmental Protection Bureau.
I. According to the Administrative Measures for Hazardous Waste Operation License, a hazardous waste operation license is required. It can be handled by the local environmental protection department.?
Application for hazardous waste collection and business license, should meet the following conditions:
1, rain-proof, flood-proof means of transport
2, there are in line with national or local environmental protection standards and safety requirements of the packaging tools, transit and temporary storage facilities, equipment
3, the development of rules and regulations, pollution prevention and control measures, and emergency rescue measures for accidents, to ensure that hazardous waste Operational safety
Second, the approval process
Application for hazardous waste business license unit (hereinafter referred to as the applicant) to apply directly to the State Environmental Protection Administration. The Pollution Control Department of SEPA is responsible for accepting the application materials for the hazardous waste business license. The applicant shall mail the application materials to the entity directly or by other means.
From the date of acceptance of the application within 20 working days, SEPA review of the supporting materials submitted by the applicant, and on-site verification of the operation of the applicant's facilities.
Conformity with the conditions, shall issue a hazardous waste operating license and be announced; does not meet the conditions, shall notify the applicant in writing, and explain in the approval process of hazardous waste operating license is required by law to hearings, monitoring, appraisal, expert review of the reasons. Provisions shall not be counted in the "Measures" referred to in the 20 working days.
Expanded Information
(1) According to the requirements of the equipment instruction manual, and the enterprise to develop a regular oil change program, and the use of scientific means of analysis, identification, from the equipment lubrication system in the tank (or pool), piping, accessories, replacement of the oil down.
(2) Some equipment due to design, assembly, repair, use, maintenance and other factors that cause part of the system leakage, with the tray, barrel, box and other containers to collect the oil.
(3) In the maintenance of equipment, cleaning lubrication system, the oil released.
(4) Replacement of lubricant parts, from which the oil poured out.
(5) Cleaning oil used to wipe down equipment and clean parts.
(6) Waste oil wrung or squeezed from cotton yarn, rags, and plastic foam used for wiping oil.
(7) Waste oil recovered from the disposal of waste emulsion, etc.
(8) Waste oil recovered from the disposal of waste emulsion.
Baidu Encyclopedia - Oil Recycling
Baidu Encyclopedia - Hazardous Waste Operation License Management Method