1. Wide range of application. In addition to the viscosity of particularly large materials, general solid materials and pieces can be used to convey it;
2. Large conveying capacity. Especially the scale plate plate conveyor (generally known as double-chain wave-type plate conveyor with baffle) can be as high as 1000t/h;
3, the high strength of the traction chain can be used as a long-distance conveying;
4, the flexible layout of the conveyor line. Compared with the belt conveyor, the plate conveyor can be conveyed under the condition of larger inclination angle and smaller bending radius, so the arrangement is more flexible. The inclination angle of the plate conveyor can reach 30 ° - 35 °, bending radius is generally about 5-8m;
5, in the conveying process can be sorted, dried, cooled or assembled and other processes;
6, smooth and reliable operation;
Bucket elevator (Bucket elevator ):
Bucket conveyor. Conveying bulk cargo (such as coal, etc.) bucket conveyor belt, the conveyor belt continuously to the bucket to the open hatch above a certain point, and then empty the bucket to the cargo hold
Bucket conveyor, suitable for metallurgy, mining, construction, chemical industry, food, food and other industries of a certain granularity, lumpiness of the material and the conveyance of powder. It includes a driving device (including backstop), shell (including horizontal section, redirection section, vertical section), and is located in the shell of the traction chain, hopper, head wheel and tail wheel, in the shell at both ends of the feeding section and discharge section, both sides of the hopper through the coupling ring were connected with two parallel traction chain. The head wheel is equipped with teeth that coincide with the traction chain. Its conveying form is three kinds of zigzag, L-shape and Z-shape. The advantages of this utility model are characterized by small size, low power consumption, flexible conveying form and sealed conveying.
Reasons for deflection and treatment
The deflection of conveyor belt is one of the most common faults when the conveyor belt is running. There are many reasons for the deflection, the main reason is the installation of low precision and poor maintenance. In the installation process, the head and tail roller, the middle roller between the same center line as far as possible, and parallel to each other, in order to ensure that the conveyor belt is not biased or less biased. In addition, the belt joints should be correct and the circumference of both sides should be the same. In the course of use, if deflection occurs, the following checks should be made to determine the cause and make adjustments. Conveyor belt deflection often check the parts and treatment methods are: (1) check the roller transverse center line and the longitudinal center line of the belt conveyor does not overlap. If the value of non-coincidence exceeds 3mm, the long mounting holes on both sides of the roller set should be utilized for its adjustment. Specific method is the conveyor belt to which side, which side of the roller group to the conveyor belt forward direction forward, or the other side back. (2) Check the deviation value of the two planes of the mounting bearing seat of the head and tail frame. If the deviation of the two planes is greater than 1mm, the two planes should be adjusted in the same plane. The adjustment method of the head roller is: if the conveyor belt runs to the right side of the roller, the bearing seat on the right side of the roller should be moved forward or the left side of the bearing seat should be moved back; if the conveyor belt runs to the left side of the roller, the bearing seat on the left side of the roller should be moved forward or the right side of the bearing seat should be moved back. The adjustment method of the tail roller is just opposite to that of the head roller. (3) Check the position of the material on the conveyor belt. The material is not centered on the cross section of the conveyor belt, which will cause the conveyor belt to run off. If the material deviates to the right side, the belt runs to the left side and vice versa. The material should be centered as much as possible during use. In order to reduce or avoid this kind of conveyor belt deflection can increase the baffle plate, change the direction and position of the material. It is a material handling machine that conveys materials continuously on a certain line, also known as continuous conveyor. Conveyor can be horizontal, inclined and vertical conveying, can also form a space conveying line, conveying line is generally fixed. Conveyor conveying capacity, long distance, but also in the conveying process at the same time to complete a number of process operations, so it is widely used.
Belt conveyor (linear) the conveyor is used for material transportation. Adopting stainless steel mesh belt as the carrier, it is suitable for drying, dehumidifying, freezing, etc. in various food industries, heat treatment, etc.; made of stainless steel, it has the features of high temperature resistance, easy to be cleaned, etc.; the specific size can be customized according to the requirements of customers.
Belt conveyor application industry: food, metallurgy, electric power, coal, chemical industry, building materials, wharf, grain and so on.
Belt conveyor structure form: horizontal straight-line conveying, lifting and climbing conveyor, turning conveyor and other forms, the conveyor belt can also be added to lift the baffle, side baffle and other accessories, to meet a variety of process requirements.
Belt conveyor conveyor material: A3 low carbon steel, 201 stainless steel, 304 stainless steel and so on.
Drive mode: gear motor drive.
Speed regulation mode: frequency conversion speed regulation, infinitely variable speed.