Ultraviolet curing lamp does not contain mercury and does not produce ozone. It is a safer and more environmentally friendly choice to replace the traditional light source technology, and it is also an ultraviolet lamp. This kind of lamp is often used in manicure and medical examination, mainly for disinfection.
The use time of uv lamps is also relatively long. When in use, the two lamps are used alternately, and the use time is longer. However, if the uv lamp has a service life, the irradiation time will generally not exceed 1200 hours. Therefore, when the irradiation time of the ultraviolet lamp exceeds 1000 hours, the lamp tube should be replaced again.
Ultraviolet lamp can play the role of sterilization, not only for medical treatment, but also for family or food industry. From the appearance, it can be said that there is little difference between uv lamp and fluorescent lamp, but there are warning signs on other products, which can be used for disinfection and sterilization and need to be used correctly.
Selection skills of uv curing lamp
1, the distance between UVLED curing machine and product.
In the process of UV curing, it is necessary to adjust the distance between the irradiation head and the substrate of the UVLED curing machine. Generally, the irradiation distance between the UVLED irradiation source and the substrate surface should be controlled between 6-8mm, and the curing effect is good. Of course, the specific use should be adjusted according to the surface temperature rise of the illuminated product.
2. Irradiation time of 2.UVLED curing machine
When using UVLED vulcanizer, you can use the conveying line. In the assembly line platform, the belt transmission speed is too fast, which will lead to incomplete drying of the cured substrate surface; Too slow belt transmission speed will lead to the increase of substrate surface temperature and affect product quality. The irradiation time is proportional to the irradiation energy. The longer the irradiation time, the higher the energy. Of course, energy also needs to follow the law of conservation and does not always increase.