First, how to adjust the air conditioner?
1. Pre-preparation: Disassemblers come to the door to disassemble the machine and bring complete sets of tools and safety equipment.
2. Refrigerant recovery: First, after the external machine is running, start the machine for refrigeration? Close the small valve when collecting fluorine, close the large valve after the valve frosts and melts, and close it immediately. Unplug the power supply and tighten the safety cover, so as to collect the refrigerant in the air conditioner mobile machine into the outdoor unit.
3. Dismantling the indoor unit: When disassembling the indoor unit, condensate water should be prevented from flowing into the circuit board;
4. Dismantle the outdoor unit: When disassembling the outdoor unit, pay attention to balance to avoid vibration and shaking, and finally wrap it in plastic for handling.
5. Installation: Pay attention to the installation position and convection when reinstalling the air conditioner. Finally, check the leakage with detergent, observe whether there are bubbles coming out of each joint, and tighten the safety helmet of the valve after confirming that there is no leakage in the system.
Second, the air conditioning conveyor matters needing attention
1. Before moving the machine, test whether the air conditioning function is normal.
2. Recover refrigerant and remove indoor and outdoor connecting wires. It is best to mark both ends of the connecting wire to avoid the possibility of failure caused by wrong connection of the connecting wire during installation.
3. In the process of handling and installation, the external machine is not allowed to turn over, and the inclination angle is too large. It is forbidden to hold the stop valve by hand to lift the machine.
4. Whether the terminals or other places with wiring are loose to prevent ignition or other hidden dangers, and whether the wires are aging. If they get old, they must be replaced.
5. Don't restart the old air conditioner within 3 minutes after it stops, otherwise it will easily burn out the compressor. The new air conditioner has a circuit to prevent it from restarting within 3 minutes. Even if it is restarted within 3 minutes, the compressor will not work.
In the process of decoration, sometimes because of the changes in the spatial structure of the house, it is found that the location of air conditioning installation in the home needs to be adjusted. At this time, we need mobile air conditioners, mobile air conditioners. It is necessary to do a good job in the new position of air conditioning, punching holes, pulling wires, etc. We can reserve the location of home appliances installation through the designer's measurement room, apply for the free measurement service of Tuba Rabbit, and have a professional designer to measure the room for free and help us plan the reserved location of home appliances for free!
The above is how to adjust the air conditioner introduced by Bian Xiao. I hope it will help you. For more information about how to transfer air conditioners, please continue to pay attention to Tuba Rabbit Decoration Network.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~