Air filter element
Air filter element is also called air cartridge, air filter, style and so on. It is mainly used for air filtration in engineering locomotives, automobiles, agricultural locomotives, laboratories, aseptic operation rooms and various precision operation rooms.
PP filter element
PP filter element is also called PP meltblown filter element, meltblown filter element made of polypropylene ultrafine fibers hot melt entanglement, the fiber randomly forms a three-dimensional microporous structure in space, dimensional pore aperture along the direction of the filtrate flow is a gradient distribution, the collection of the surface, the depth, the fine fine filtration in one, can be intercepted impurities of different particle size. The precision range of the cartridge is 0.5-100μm, and its flux is more than 1.5 times that of the peak house cartridge of the same precision. It can be configured with different types of end-cap fittings to meet the needs of various engineering installations.
Wire-wound filter element
The textile fiber yarn with good filtration performance is precisely wound on the porous skeleton and refined. The yarn material has polypropylene fiber, acrylic fiber, skimmed cotton fiber and so on. By controlling the tightness and sparse density of yarn winding, it can be made into different precision filter cores, which can effectively remove suspended matters and particles of various liquids, and have high purification effect on various liquids.
Folded microporous cartridge
Folded microporous cartridge adopts polypropylene (Polypropylene) thermal spray fiber membrane, nylon (Nylonb) polytetrafluoroethylene (PTEE) microporous membrane and other filtration media made into a precision filter pieces, with a small size, large filtration area, precision and other advantages. The range of filtration precision can be from 0.1μm to 60μm, and the sealing of the cartridge end cover and the connection of the whole structure adopt hot-melt bonding. The cartridge connectors are of three internationally recognized types: 222 connector, 226 connector and flat port. The products have passed strict and complete tests before leaving the factory to ensure the stable performance of the products.
Activated carbon cartridge
There are two types of activated carbon cartridge products: compressed activated carbon cartridge and bulk activated carbon cartridge.
1, compressed activated carbon cartridge using high adsorption value of coal activated carbon and coconut shell activated carbon as a filter material, and food-grade binder sintering compression molding. The inside and outside of the compressed activated carbon cartridge are wrapped with a layer of non-woven fabric with filtration effect, which ensures that the carbon core itself will not fall off the carbon powder, and the two ends of the carbon core are equipped with soft nitrile rubber sealing gasket, which makes the carbon core loaded into the filter cartridge with good sealing.
2, bulk type activated carbon cartridge will need activated carbon particles into the special plastic shell, with welding equipment will be welded to the shell end caps on both sides, the shell ends were put into the filtering role of the non-woven cloth filter, to ensure that the carbon core will not fall off the charcoal powder and black water when in use. According to the customer's needs, the shell end caps can be made into different types of connections. The connection methods are: flat pressure type, pipe type (models: 4042, 4044, 4046, etc.).
Double section cartridge
Upper section: polypropylene meltblown cartridge precision 5μm
Lower section: granular activated carbon cartridge built-in activated carbon 170g
Materials: ABS, PP
Length: 250mm O.D.: 70mm Flux: 8L/S Total flux: 6-8T
Activated carbon indexes: Strength >. ;90; Iodine value(mg/g)>950; Methylene blue value(mg/g)>120