First of all, you need to prepare
BNC connector, also known as Q9 head its role is to do the connector for the connecting line with (you can let sell capture card camera merchants directly to help you do a good job)
Video cable, SYV75-3 line, connecting the camera to the video capture card transmission line.
Camera power supply, DC12V0.8 ~ 1A, this is a common type of power supply, there are other, depending on what kind of demand for your surveillance camera.
Power cord, you can find some power cord in this case, that is, ordinary wire on the line.
Video capture card installed on the computer, the video signal transmitted by the camera to process the conversion.
The next thing to do is
Install the video capture card on the computer motherboard PCI slot, and then boot, the computer will detect new hardware, cancel, the capture card comes with a CD-ROM into the CD-ROM drive, find the driver to install, finished, and then refresh the hardware to re-scan the hardware to install.
Find the monitoring software installation program on the CD-ROM, and follow the prompts to install it.
Place the camera in a good position (if you need to install it on the wall, you need a camera bracket, which may be sold with the camera, if not, you need to purchase separately)
After the video cable has been laid out, the BNC connector will be connected to the front of the camera, and the back of the camera will be inserted in the capture card's own interface.
Power plugged
This time to open the computer to install the monitoring software, in theory, at this time you can see the monitoring image, if there is a failure to follow up ~!