1. First, you need to enable the DHCP service of the switch.
2. Configure the return interface to join Vlan, and configure GE0/0/1 and GE0/0/2 to join VLAN10 and VLAN11, respectively.
3. Configure the IP address of the VLANIF interface, and configure the answer IP address of VLANIF10 and VLANIF11, respectively.
4. Configure the global address pool, and configure the IP address pool and related parameters in POOL1 and POOL2, respectively.
5. Enable the DHCP server under interfaces VLANIF10 and VLANIF11, respectively.
6. Verify the results of the previous configuration.