What equipment is needed for the stage?

What equipment is needed to build a conventional stage

The main equipment includes professional audio equipment, video equipment, stage lighting, choreography effects equipment.

1, professional audio equipment

mixing consoles, amplifiers, speakers, line arrays, equalizers, effects, crossovers,

pressure limiters, laptops, CD players, MD players, DVD players, wired microphones, wireless microphones, walkie-talkies, wireless chestnuts, microphone brackets and other equipment.

2, video equipment

projector, projection screen, projection lifting frame, plasma TV wall, LED screen, etc.

3, stage lighting

computer lights, downlights, AC lamps, imaging lamps, digital light control, computer light console dimmer, effect lights, laser lights, surface lights, strobe lights, three-color soft light, chasing the light, spotlights, computer scanning lights, computer color changing lights, computer color changing lights, computer scanning lights. Lights, computer color changing lamps, computer diffusion lamps, gobo lights, stage days, ground row lights, digital silicon box flow lamps TRUSS frame.

4, choreography effects

Cold fireworks, rainbow cannons, dry ice machine, air columns, stage smoke machine, snow machine, bubble machine, fireworks machine, stage backdrop, spray painting, ***, carpet, a variety of lighting, light rack equipment rental, projector rental, simultaneous interpretation equipment rental, audio equipment, stage rental.

What equipment is needed for the stage

The main equipment includes professional audio equipment, video equipment, stage lighting, choreography effects equipment

Outdoor stage configuration are needed for what equipment

Outdoor is relatively empty, the power requirements for speakers and amplifiers are more stringent, roughly the configuration is as follows:

Wireless microphone (referred to as hand-held) 4, generally There are two almost, but some performances with musical instruments is the need to put the handheld on the side of the musical instrument radio, so you need to spare two.

Two headsets, singing and dancing singers to use. Generally when you buy a handheld, in addition to the microphone receiver, it will come with a chest microphone, a headset or two headsets.

The vertical microphone stand four. blog.ccjt/.01.jpg

This is the first time I've bought a handheld microphone, and it's the first time I've used it. .01.jpg

8-channel or 12-record mixer (lzjy/... .28.jpg), it is best to buy a net desk, buy a single amplifier, amplifier usage is more diligent, if it is bad, you can replace it separately, and amplifier is much cheaper than the desk.

Amplifier a, buy a mixer to choose a power match.

Sound often: the front send speakers in the picture below on the left, in the middle or right under can (lzjy/.... .21.jpg) two, playback speakers two upper right in the picture.

Set up a set of stage equipment need those things

sound equipment part: it is recommended that you buy full-range speakers and bass speakers, amplifiers, audio processors, effects, mixing consoles, DVD players and wireless microphone these devices.

Lighting equipment part: it is recommended that you buy LED high-power waterproof lights, computer moving head lights, lighting DMX512 console and other equipment.

Brand more famous: JBL speakers QS amplifier, ENLANG lighting

Stage audio equipment, a full set of what are the main

A full set of professional stage audio equipment include:

1, mixing consoles: monitor mixing consoles, amplifier mixing consoles, portable mixing consoles.

2, power amplifier (i.e., amplifier).

3, microphone: dynamic microphone, condenser microphone, wireless microphone.

4, speakers: main speakers, monitor speakers, amplifier speakers, subwoofer.

5, peripherals: equalizer, reverb, effects, delay, compressor, limiter, splitter, noise gate.

6, auxiliary equipment: laser turntable, recording deck, disk player, projector, pitch shifter, jukebox, headphones and many other devices.

In addition to the above equipment, in the stage performance scene also need a professional tuner. The mixer is responsible for the performance of all the audio equipment on stage professionals. First of all, you need to focus on all the sound sources to the mixing console, and then they are divided into various subway, grouping, tuning, and then the total output audio by the total sound equalization to the amplifiers and speakers to send out the sound, in order to make it compatible with the acoustic characteristics of the venue.

A set of professional stage audio equipment contains what

Currently on the market a wide variety of stage audio equipment, different functions, to the selection of audio equipment has brought a certain degree of difficulty. In fact, the general situation of professional stage audio equipment is by the microphone + mixer + amplifier + speakers can be. Sound source in addition to microphone, sometimes also need DVD, computer play music, etc., can also only use the computer. But if it is to be a professional stage sound effects, in addition to the need for professional stage construction staff, but also to add effects, sequencers, equalizers, limiters and other audio equipment.

A Harvest sound company for you to introduce the professional stage sound equipment are mainly what:

1, mixing console: with multiple channel input, each channel sound can be individually processed, and has the output of the left and right channel, mixing, monitoring and so on, a kind of sound mixing equipment. It is an important device for sound engineers, recording engineers and composers to create music and sound.

2, amplifier: the audio voltage signal into a fixed power signal used to drive the speaker sound equipment. Amplifier power matching conditions are the output impedance of the amplifier is equal to the speaker load impedance, as well as the output power of the amplifier to match the nominal power of the speaker.

3, Reverberator: In the cabaret sound system and large stage lighting concert venue, a very important part of the human voice reverb processing. The human voice after reverb processing, can produce a kind of electronic audio aesthetic, so that the song has a special flavor. It can be some amateur singers voice in the existence of certain defects, such as hoarse, throaty and sharp noise of the vocal folds of the murmur after reverb processing to mask, so that the sound is not so difficult to hear. In addition, reverb can also make up for amateur singers due to the lack of specialized vocal training and produce the phenomenon of overtones in the structure of the tone is not rich. This is very important to the effect of stage lighting concerts held.

4, crossover: the realization of the frequency of the circuit or device called crossover. There are many types of frequency dividers, according to the waveform of its frequency signal, there are sinusoidal frequency division and pulse frequency division of two kinds. Its basic role is, according to the requirements of the combination of speakers, the full-band sound frequency signal into different frequency bands, so that the speaker unit to get the right band of excitation signals, work in the best state.

5, pitch shifter: Because people's voice conditions are different, in the singing of the accompanying music pitch requirements are not consistent, some people hope that lower, some need to be higher. In this way, it is required that the pitch of the accompanying music should be adapted to the requirements of the singers, or else they will feel that the singing voice and the accompaniment are very disharmonious. If the use of accompaniment tape requires the use of a pitch shifter for pitch shifting.

6, the pressure limiter: is the compressor and limiter merger of the collective term. Its main role is to protect the amplifier and speakers (speakers) and create special sound effects.

7, effects: to provide sound field effects, including reverb, delay, echo and special processing of sound audio equipment.

8, equalizer: is a different frequency enhancement, attenuation, adjust the bass, midrange, treble ratio of the equipment.

9, speakers and speakers: speakers are electrical signals into sound signal devices. Distinguished by the principle of electric, electromagnetic, piezoelectric ceramic electrostatic and pneumatic.

Speaker box, also known as the speaker box, is the speaker unit into the box in the device, it is not a pronunciation component, but to show and enrich the bass sound-assisting components. Can be roughly divided into three kinds: closed speakers, inverted phase speakers, labyrinth speakers. Speaker equipment on the stage set up to give it a considerable amount of attention to the location of the factors.

10, microphone: microphone is the sound into an electrical signal of an electro-acoustic transducer device. Is the sound system in the most varied a unit, according to its directionality to distinguish between non-directional (round), directional (cardioid, super-cardioid) and strong directionality, which non-directional is specifically for the band to pick up the use of sound; directional is used for voice, song and other sources of sound pickup; strong directional is specifically to pick up a certain orientation of the source of the sound to the left and right sides and behind the exclusion of the sound of the microphone pickup Outside the space, and specifically using the principle of mutual interference phenomenon of sound waves, the use of acoustic interference tube made of a long, thin tubular microphone, known as the microphone, used in the art stage and news interviews; according to the structure and scope of application of the distinction between moving-coil microphone, aluminum microphone, condenser microphone, pressure zone microphone-PZM, electret microphone, MS stereo microphone, reverb microphone, modulation microphone and so on. You can come to Shenzhen Yiho if you have the need in this area.

Stage sound equipment should be how to configure

Look at your performance stage coverage is how big?

What equipment is needed to build a lighting stage

First, we will introduce you to the elements of stage lighting:

First, the components of stage lighting

1, light controller

2, various types of lights

3, aviation box (used to load lamps and lanterns, easy to transport)

4, light bracket

5, power lines / signal lines

Second, the types of stage lighting Stage lighting is a lot of types, but also very complex, and a lot of stage lighting are customized because of various occasions, it is not possible to elaborate on this, just to introduce some of the most commonly used, the most representative of the lights.

1, the light light light light light light is commonly divided into two kinds, ordinary light light, led light light.

Pa light is generally installed in the special lamp frame or lighting frame, the main role is to ensure that the brightness of the stage and some lighting effects. Ordinary pa lights pictures and effects LED pa lights pictures and effects

Ordinary pa lights are now gradually replaced by LED pa lights because of their high power and impure color. In my understanding, the LED pa light compared to the pa light the biggest advantage lies in: 1, a variety of colors, special effects effect 2, under the power, can meet a variety of venues on the power requirements 3, the softness of the light. So it is recommended that the majority of customers in the selection of the par light, give priority to the LED par light.

2, computerized moving head lights are also all kinds of parties, the annual meeting in the often used lights. Computerized bobble head lights, as the name suggests, is the light constantly shaking the head, back to the shaking light effects. Pictures and effects of computer moving head lights The main feature of computer moving head lights is the dynamic lighting effects, so that the stage and the program is more vibrant, more dynamic.

3, chasing light chasing light pictures and effects

Chasing light is also a wedding, conference services, the company's annual meeting of the necessary lighting.

4, beam light beam light pictures and effects

The effect of the beam light is a bright column of light, widely used in concerts, or singing, dancing and other cultural programs on the scene.

A brief introduction to the celebration of the common types of lighting, different stages require different stage effects, the design of the stage program will be different. If you have any questions, you can contact us at Guangzhou Mein Stage Lighting Company. Provide a one-stop stage engineering solutions

What equipment is needed for the band to perform

1, the tuner must be, before going on stage to adjust the sound

2, the stage box is to listen to the off-stage, the second is for the stage musicians to monitor

3, you first say the budget ...

4, you said that the best-selling that is the mixer, not the tuner

Stage lighting include what equipment

Commonly used lamps and lanterns and features

1, spotlight: is the most widely used on the stage lighting one of the main types of lamps, the current market has 1KW, 2KW, 2KW is the most widely used. It irradiation light concentration, spot outline edge is clearer, can highlight a local, can also enlarge the spot lighting a region, as the main stage light source, commonly used in the face light, ear light, side light and other light position.

2, soft light: the light is soft and even, can highlight a part, but no hard spot, easy to connect several lights, common 0.3KW, 1KW, 2KW, etc.. Mostly used for column light, flow light and other close light position.

3, back to the light: it is a reflective lamps and lanterns, which is characterized by hard light quality, high illumination and range, is a kind of both economic and efficient bright lights, common main 0.5KW, 1KW, 2KW, etc., to 2KW use the most.

4, diffuse light: light diffuse, homogeneous, large projection area, divided into the sky rows of diffuse light and ground rows of diffuse light, common 0.5KW, 1KW, 1.25KW, 2KW, etc., mostly used for the canopy irradiation, but also can be used for theater podium general illumination.

5, modeling lamp: the principle between the chasing light and spotlight, is a special lamps and lanterns, mainly used for characters and scenery modeling projection. 6, footlights (also known as strip lights): soft light, wide area. Mainly as to the middle scene, net scene light, color, but also in the table mouth position to assist the surface lighting.

7, light column lamp (also known as downlight): currently more widely used, such as PAR46, PAR64 and other models. Can be used for characters and scenery lighting in all directions, can also be installed directly on the stage, exposed to the audience, the formation of a light array, for stage decoration and lighting double role.

8, projection slides and canopy effect lights: can be formed on the stage canopy as a whole picture, and a variety of special effects, such as: wind, rain, thunder, electricity, water, fire, smoke, clouds and so on.

9, computer lights: This is a DMX512 or RS232 or PMX signal control of intelligent lamps and lanterns, its light color, spot, illuminance are better than the above conventional lamps and lanterns is the development of an intelligent lamps and lanterns in recent years, often installed in the face of the light, the top of the light, the stage after the steps and so on the location of the operation of the color, shape, charts and so on can be programmed to run the program. Due to the different power sizes, the use of the stage to make a difference. General small power computer lights, only suitable for dance Stage Lighting Hall use. On the stage of the small power computer lights, light spots are often stage spotlights, backlighting and other talk about off, so the choice to pay special attention to.

10, chasing lights: stage lighting fixtures, characterized by high brightness, the use of lens imaging, can show a clear spot, by adjusting the focus, and can change the spot reality. There are movable light bar, you can easily change the color, the lamp body can be free to run and so on. Currently the market more varieties, labeling indicators are not the same way to power as a standard, such as: 1KW tungsten halogen light source, 1KW dysprosium light source, 1KW metal halide light source, 2KW metal halide light source, etc., but also to the distance as a standard for the chasing light (in a specific distance under the intensity of the light, the illuminance), such as 8-10m chasing lights, 15-30m chasing lights, 30-50m chasing lights, 50-80m Chasing light, etc., and in the function of the distinction between: mechanical chasing light, its focus, light bar, color change are manually completed; the other for the computer chasing light, its focus, light bar, color change, adjust the color temperature are through the push-pull appliances and automatically completed, so in the selection of the various indicators must be carefully selected. Red Double Happiness Celebration Company long-term supply of conference truss construction and leasing, Xiamen stage construction, stage backdrop, Xiamen lighting and sound leasing