Water softener water softening equipment sodium ion exchanger system water time: i.e., running time/hourly water consumption/average/peak
Does the water softening equipment need continuous water supply? If you need to choose double-bed centralized control or double-control double-bed series, otherwise you can choose a single valve single tank series.
3. Total hardness of source water: the source of water is municipal tap water \ groundwater \ surface water sources, you need to provide the total hardness of raw water in the use of the region. For a certain type of water softener raw water hardness is high, the cycle of water production is bound to be relatively reduced, which leads to frequent regeneration of water softening equipment. Relatively reduce the service life of the resin. In order to avoid such a situation, should increase the volume of resin, which means that the choice of increasing the model of water softener.
The water treatment company will be able to accurately select the softener suitable for the requirements of your system equipment.
If you do not understand the water quality of the water source used, you can be entrusted to my company's analytical laboratory, we provide free routine water quality analysis.
4, the required soft water unit flow (tons / hour). This is determined by the nature of the user's equipment and requirements, we have selected a standard reasonable model of water softener;
5, the cycle of water set
In the softener model set, according to the hardness of the raw water, the resin used in the exchange of the working capacity of the theoretical cycle of the amount of water can be determined (tons).
Automatic water softener selection notes
1, automatic water softener controller: the full use of the United States FLECK FLECK, AUTOTROL AUTOTROL AUTOTROL AQUAMATICYAKE YAKE
2, resin tanks: can be a variety of choices: domestic RFP tanks, stainless steel tanks, metal lined with plastic tanks (PE liner)
.Imported (Stroh's) RFP tank
3, automatic water softening equipment operation control form:
sm-flow type: preparation of water to reach the set value of the automatic restoration, can be applied to all the water supply system soft water preparation.
S-time type: time for the control of regeneration metering, suitable for water supply system with stable water consumption, the shortest restore regeneration cycle of 24 hours.
4, optional equipment combinations:
1) - single-control single-bed: stop the water supply during the reduction of 2 hours or continue to supply raw water (hard water bypass).
(2)-Single-control double-bed: alternating water supply, one with a backup type.
(3)-Double-control double-bed: alternate water supply, one with a backup type.
(4)-Double-control double bed: water supply at the same time, alternate regeneration type.
(5)-Multi-control multi-bed: more than three resin tanks used in parallel, suitable for large water supply system.
Note: should be selected according to the raw water hardness value. Such as high hardness water (> 10mmol / L), it is recommended to increase the selection of a level; > 14mmol / L, the second softening should be used or with other methods