Z3 Industrial Grade 2.5-inch SAS Solid State Disk Product Specification

Z3 Series 2.5-inch SAS Industrial SSD (Z3 SAS Disk for short) is a high-end product for industrial, automotive electronics, medical equipment, military, aviation and marine applications. The SAS interface of this product adopts a dual-port design, which provides a more secure application for dual-control and dual-activity design. When a host fails, the backup host can seamlessly switch to work in real time, making it an excellent choice for highly reliable servers and storage arrays.

The Z3 SAS Disk is powered by Leadtek's industrial-grade, self-contained master controller, with a maximum capacity of 4TB and continuous read/write speeds of more than 500MB/S. The product is based on superior SSD master control algorithms, and is equipped with over-voltage, over-current, and power-down protections. It also provides a wide range of special, customizable features, such as AES encryption, secure deletion, and one-click physical and one-click logical self-destruction.

Main features and performance

● Dual-port SAS design: Dual-control, dual-activity features to provide more secure applications

● Ultra-large-capacity design: Maximum capacity of up to 4TB

● Outstanding read/write performance: Read/write transfer rate of up to 500MB/s or more, with a stability of up to 85% or more, and no significant dropouts

● Highly scalable, reliable, and easy to use. ● Multiple customizable functions: Data encryption, Secure Erase (SE), Write Protect, One-click Physical Self-Destruct, Logical Self-Destruct, and other customizable functions are available

● Industrial-grade operating temperature: -40℃~+85℃

Product Specifications

Basic Features

Host Interface: SAS 6.0 Gbps (backward compatible with SATA 6.0 Gbps) Gbps (Backward compatible with SATA 3.0/1.5Gbps)

Dimensions:2.5 inch? (100.0mmX70.0mm9.5mm) L×W×H

Connector: SAS 7+7-pin signal pins + 15-pin power pins

Capacity: MLC: 256GB~2TB

? SLC: 128GB~512GB

Input Voltage:5V (±5%)

Performance

zuiLarge sequential data read/write:500/500MB/s

Read/write IOPS:75,000 /65,000

Response time:<0.1ms

Flash Management

Flash Management Algorithms: Static and Dynamic Loss Equalization, Bad Block Management Algorithms

SMART :Support

Hardware ECC Error Correction: Supports BCH ECC 8~80bits/512Bytes or 1KBytes

Other Functions

Function 1: Supports Power Failure Protection

Function 2: Supports Power Failure Protection

Function 3: Supports Power Failure Protection

Function 2: Supports TRIM (requires OS support)

Function 3: Supports AES-128/256 bits

Function 4: Supports NCQ

Function 5: Supports Power Interface Management

Function 6: Supports SSC Spread Spectrum Clock

Function 7: Supports Dynamic Power Management

Environmental parameters

Temperature range: Operating: -40 to +85°C (industrial) Storage: -50 to +95°C