The square column buckle has a scientific structure, and does not use wall-penetrating screws, which is more conducive to the later dismantling and recycling, greatly improving the turnover times of the formwork, saving not only manpower but also material costs for the construction party. Moreover, the reinforcement effect of this new type of square column fastener is better than the traditional reinforcement method, which eliminates the common problems of slurry leakage and formwork expansion in the traditional reinforcement method. After demoulding, the column can achieve the effect of drywall.
Square column buckle is a special support fixture for fixing square column formwork, also called pin and inclined iron. Its shape consists of a single galvanized splint corresponding to four elbows. One end of the clamping plate is arranged in a bending structure, and each clamping plate is provided with a plurality of fixing holes at equal intervals along the length direction. The wedge-shaped fixing pin passes through the through hole and the fixing hole to fix the limiting sleeve and the splint, thus forming a square column template fastener which is convenient to install and disassemble.
Specific installation parameters of square column buckle
1. Horizontal parameter: placed horizontally, with four fixtures on the same horizontal plane;
2. Vertical parameters: the vertical distance of the first group of square column buttons from the ground 15cm, with a spacing of 35cm；;
3. Choose whether to add a set of square column buttons at the joint according to the construction requirements.
The demoulding effect of square column buckle reinforcement;