Audley laser banner machine setup parameters are heating power 40, delay 60, cooling off 15, open 18, carbon saving 20.
If the day is cold, you can adjust up a few values, temperature between 40-60, walking speed between 40-60, the number of repetitions you want to do a few on the setting of a few. Print out the best results, and does not hurt the machine. The smaller the travel speed the faster the print speed, but there may not be a clear place. Temperature is too high ribbon may break, run 10 minutes after the temperature is set between 35-45.
The indoor temperature is too high, will cause the ribbon break, install air conditioning, reduce the indoor temperature can be solved.
Left and right errors (adjust the print head left and right ends of the up and down position), before and after the error (adjust the print head before and after the position), the middle of the color depth of the two sides of the light or light in the middle of the two sides of the deep, which will cause the printing of the color difference.
Expanded information:
Stage of development
1, all artificial stage: the most primitive of the first is manually write on paper and then paste it on the cloth.
2, the use of lettering machine stage: the first lettering machine in the paper in wisps, and then fixed in the banner cloth brush paint. This method than the previous one has some improvement but still need a lot of manpower and site.
3, thermal transfer banner machine: this machine is combined with the lettering machine used together: the first lettering machine will transfer the paper engraved, and then fixed on the transfer cloth. It is transferred on the cloth by the heat generating large roller of the banner machine. This way reduces manpower and increases production speed to some extent, but it still requires more than two people to produce and consumes an incredible amount of power.
4, automatic banner machine: through the pen directly on the cloth, the writing method by the computer direct output. As long as you line up in the computer what you want to output, and then through the software output can be. Really do full-automatic without special personnel to watch over, high-speed models can produce 50 meters of banners in one hour. Low cost, saving human resources and time.
5, the latest model is the laser ribbon banner machine, but the laser ribbon banner machine high cost, high price, technology is being developed and updated, so the market share is not high. But will be a direction of future market competition.
Baidu encyclopedia - banner machine
Baidu encyclopedia - laser banner machine