1, and the tower spacing, should be in accordance with the "Fire Code" in the spacing requirements of the heating furnace and the tower layout.
2, with steam or heat carrier heating equipment should be close to the tower layout, and maintain a certain height difference with the tower by the process design, the distance between the two should meet the requirements of the pipeline layout, reboiler tube bundle should be one end of the maintenance site and access.
3, it is appropriate to use the tower as a support layout in the tower side, and maintain a certain height difference with the tower determined by the process design, and above it should leave enough space for maintenance.
4, a tower with more than one parallel vertical reboiler, reboiler location and installation height, in addition to maintaining a certain height difference with the tower, should meet the requirements of the arrangement of the import and export of the collection of pipe and facilitate the operation and maintenance.
Reboiler is also known as reboiler, as the name suggests is to make the liquid vaporized again. Its structure is similar to the condenser, but one is used to cool down, while our product is used to warm up the vaporization. It is a special heat exchanger capable of exchanging heat while having space for vaporization. The material level is at the same height as the fractionator level. The liquid phase is provided from the bottom line of the tower into the equipment.