Chapter IV Medical Device Management System
Document Name Basic Tasks of Hospital Instrument and Equipment Management
Electronic File Code ZYGL-04-001 Page 2-1
According to the principles of technological advancement, quality and reliability, economic rationality, suitability for use, and convenience of maintenance, to formulate the development plan of the hospital's instruments and equipment, purchase plan, collateral system, management measures and maintenance plan, to provide the variety, quantity, specification, quality, performance of qualified technical equipment for diagnosis and treatment to meet the medical, economic and social needs of the patients.
According to the principle of advanced technology, reliable quality, economic and reasonable, suitable for use and convenient maintenance, the development plan of hospital equipment, purchase plan, receiving system, management measures and maintenance plan for diagnosis and treatment of varieties, quantities, specifications, quality, performance of qualified equipment to meet the needs of medical treatment, teaching, research and preventive health care.
Second, the development of management systems, improve the departmental services, clinical and medical departments for the use of medical equipment and equipment, repair, maintenance of guidance and supervision and inspection, to ensure that equipment and equipment in a good state of technology and a high rate of equipment, utilization rate, give full play to the effectiveness of the equipment and equipment, to avoid the waste of backlogs.
Three, should take the initiative under the departmental services, good maintenance, to ensure that spare parts to replenish, and pay attention to the training of technical force, improve the medical engineering knowledge and skills.
Four, to promote the construction of key disciplines in the hospital, to help key departments to equip instruments and equipment for technical assessment and feasibility demonstration, to provide information about the instruments and equipment information for the leadership of the hospital to provide the basis for decision-making.
Fifth, strict standardization of management, the use of advanced management methods, and seriously do a good job in the classification of instruments and equipment and the application of the code, to do a good job in the scientific management of equipment, improve the job responsibility system.
Sixth, efforts to improve the economic efficiency of instruments and equipment, strengthen the financial management of instruments and equipment, fixed fund management, working capital management, cost accounting, cost-effective and cost-effective analysis and evaluation.
Seven, according to the provisions of the renewal of instruments and equipment and elimination of scrapping work in earnest.
Document Name: Basic Tasks of Hospital Instrument and Equipment Management
Electronic Document Code: ZYGL-04-001 Page: 2-2
VIII. Attaching importance to the measurement of the work of regular quality supervision and management of instruments and equipment to ensure that instruments and equipment in line with the requirements of the statutory measurement standards.
Nine, abide by the law, strictly prohibit illegal behavior and unethical practices in the process of acquisition of instruments and equipment, and consciously accept the supervision constraints.
Document name medical device equipment management principles
Electronic file code ZYGL-04-002 Page 1-1
I. Dynamic management principles
That is, should be based on the actual situation of different types of different departments and different performance of the instrumentation and equipment to take the different management methods. Sometimes even for different needs (such as clinical treatment needs, research needs or disciplinary construction needs) to develop different management methods and policies, the management of medical equipment and equipment to have an orientation, the guiding ideology of its orientation is the need for medical development of strategic objectives.
Two, the principle of systematic management
To establish a holistic concept, to overcome the department all (or even personal ownership) of the narrow concept of the overall function of the overall function and the size of the overall benefits (rather than local functions and local benefits) to assess the effectiveness of the management of equipment and equipment, and at the same time in the decision to purchase equipment whether to equip an equipment equipment must be purchased from the overall resource conditions, technical conditions, management conditions and market conditions to consider, and to determine whether to acquire a device, the overall management of the medical equipment management, and the overall management of the medical equipment management. The conditions of the overall resources, technology, management and market conditions to consider, and to carry out an analysis of the advantages.
Three, the principle of economic management
means that must be in accordance with the laws of the economy, in accordance with the law of value, to do in the management of hospital equipment and equipment, including the acquisition, use, storage, receipt, maintenance, renewal process, should be economic accounting, economic efficiency, the effect of the resources, in order to improve the quality of diagnosis and treatment services.
Four, the principle of openness and coordination
In the management of instruments and equipment to adhere to the concept of openness, fully improve the utilization of resources, pay attention to the utilization of instruments and equipment, information exchange and feedback, and to promote the resource **** enjoyment, and never take the "closed" backward policy and closed measures, in particular, we must prevent and reverse a few Section or personnel to purchase equipment advanced medical equipment as a tool for small group interests or personal interests.
Document Name: Main Functions of Instrument and Equipment Section
Electronic Document Code: ZYGL-04-003 Page: 1-1
According to the objectives of the hospital's development plan and the needs of medical care, teaching and scientific research, to formulate the hospital instrument and equipment equipment planning and implementation of the plan in phases.
Second, according to the clinical, medical and technical departments requisition plan and reserves, the preparation of the annual procurement plan, submitted to the President for approval after the implementation.
Three, the development of hospital equipment and equipment management rules and regulations and specific management methods, implementation details.
Four, the specific organization and implementation of hospital equipment equipment planning, equipment and equipment management process to do a good job in the procurement, ordering, acceptance into the warehouse, installation and commissioning, issued by the use of maintenance, repair and maintenance, transfer, renewal and reconstruction, loss, scrapping, measurement and inspection, statistics and a series of day-to-day business work.
Fifth, efforts to improve the comprehensive efficiency of the hospital apparatus and equipment, and constantly strengthen the scientific management of hospital apparatus and equipment.
Sixth, the organization of the hospital apparatus and equipment management information collection, collation, synthesis, analysis, preservation, retrieval and other work, for the hospital leadership to provide the relevant decision-making basis.
Seven, the organization and help the medical staff to master the use of instruments and equipment methods and essentials, to improve the medical staff knowledge of medical engineering technology.
VIII, in cooperation with the medical staff to carry out technological innovation and scientific research on instruments and equipment, to promote the development of hospital technology and the development of new equipment.
Document Name Main Functions of Instrument and Equipment Section
Electronic Document Code ZYGL-04-003 Page 2-2
nine, the strict implementation of the rules and regulations, to comply with the norms of the hospital's professional ethical construction, to prevent unethical practices in the acquisition of instruments and equipment, and strive to improve the economic results.
Ten, do a good job in the daily affairs of the hospital apparatus and equipment management committee.
Document name medical device equipment managers quality requirements
Electronic file code ZYGL-04-004 page 1-1
Improve the quality of medical device equipment management personnel is to improve the management of hospital devices and equipment is an important condition. Quality requirements include two aspects:
One, *** the same quality requirements, including ideological and political quality, cultural and technical qualities, management and scientific qualities, etc., the requirements of the love of the post, dedicated to the work, integrity and public service, proficient in technology, skilled in operation, know how to manage and have a certain degree of organization and planning capabilities.
Two, specific quality requirements, including a certain degree of basic knowledge of medical professionals and the most basic professional knowledge of medical equipment and equipment, operating ability, maintenance technology, and to achieve "multi-talented" technical requirements, especially to abide by the code of professional ethics and code of conduct.
Document name medical device equipment management staffing principles
Electronic file code ZYGL-04-005 Page 2-1
I, the principle of moral integrity
Both the dedication to the work of the profession, loyalty, obedience to the need for diligence and integrity, do not seek personal gain of professional ethics, but also have to study hard, hard work, rigorous study, The technical requirements of excellence.
Second, the principle of streamlining
Staffing should be based on the actual hospital, realistic, lean and effective, to prevent the phenomenon of people overworked.
Third, the principle of stabilization of the team
We should attach great importance to and care for equipment and equipment management personnel and engineers and technicians, not only strict requirements, but also care for the stability of the personnel, pay attention to not make them feel unappreciated and than the medical staff, "inferior", and to fully mobilize their enthusiasm, initiative, and creativity. The company's business is also a good example of how it can be used.
Fourth, the principle of consistency of responsibility and authority
To make the best use of their talents, each responsible for their own responsibilities, and give full play to their ingenuity.
Fifth, the principle of reasonable structure
To be equipped with a variety of different engineers and technicians in accordance with the management of hospital equipment, taking into full account their professional structure, knowledge structure, academic structure, ability structure, age structure and geographic structure, to play a cross-complementary role in the discipline.
Attached:
Hospital instrument and equipment management personnel assessment score sheet
Unit Name Position
Category Assessment Content Score My Assessment Section Assessment Supervisor's Assessment Final Assessment Score
Political and ideological performance of 15% 1. Implementation of the Party's and the state's routes, policies, guidelines, policies, and the attitude and performance of political learning
2. 2) Integrity and professional ethics
3) Work style and ideological style 5
5
5
Working attitude 15% 4) Career, motivation, the courage to take on heavy burdens, and active work
5) Whether to take the initiative to use one's brain, innovate and create and its results in the workplace
6) Observance of labor discipline, attendance, and the ability of the employee to work in the workplace
7) The ability to work in the workplace, and the ability to work in the workplace. Labor discipline, attendance and sick leave, obedience to organizational assignments and compliance with the law 5
5
5
Business ability 10% 7. Competence in their jobs
8. Knowledge of business and technical skills 5
5
Work performance 60% 9. Formulation, establishment and compliance with the implementation of rules and regulations
10. Compliance with safety regulations and whether accidents have occurred
11. Formulation of plans and achievement of plan targets
12. Custody and use of instruments and equipment in accordance with the accounts and cards
13. Custody of instruments and equipment storage and wear and tear situation
14. Collecting and organizing relevant information materials to provide a basis for decision-making by the leaders
15. Maintenance and utilization of instruments and equipment, thrift and frugality
16. Economic management and fund management and analysis of economic benefits
17. Helping clinical and medical departments to engage in scientific and technological development, and promoting the construction of hospital disciplines
18. Technological innovations and innovations, the publication of theses and awards
19. 19. Quality inspection and measurement assessment by higher units
20. Engaged in or assisted in teaching and scientific research 5
5
5
5
5
5
5
5
5
5
5
5
5
5
5 /p>
5
Document Name Principles of Equipment for Devices and Equipment
Electronic File Code ZYGL-04-006 Page 2-1
The equipment management of medical devices and equipment refers to the management of the whole process from the requisition to the plan, and then through the selection of models, orders until the arrival of the equipment, installation and acceptance. In order to provide the most appropriate technical equipment for clinical care, teaching, research, in the development of planning and planning, should follow the following principles of equipment:
I. Economic principles
1. In accordance with the actual economic capacity to prepare the hospital's equipment program, and make the equipment layout reasonable.
2. Equip departments according to the predicted source of patients, the predicted economic and social benefits.
3. Equip departments according to the principle of doing more with less and the principle of intensive growth with less input and more output.
Second, the principle of practicality
that is, combined with the size of the unit, the task, the status quo and the medium and long term development plan for the actual situation to formulate the equipment plan, in this regard, should be dealt with in the following aspects of the relationship:
1. Acquisition of large-scale instrumentation and equipment with the acquisition of conventional instruments and equipment in the relationship of the relationship between the priority should be given to the acquisition of conventional instrumentation and equipment.
2. In highlighting the relationship between the focus and to ensure comprehensive, should highlight the focus, the formation of the situation, fill the gaps in the region, so as to give play to the characteristics and advantages of the hospital, do not engage in the distribution of funds to all aspects of egalitarianism.
3. The introduction of large instruments and equipment to have a certain degree of awareness of the front, the introduction of reliable performance, advanced technology, at least five years do not lag behind the high-precision, sharp world-class advanced equipment.
4. For the large volume, wide range of popular instrumentation or clinical applications without any characteristics of instrumentation, in the pursuit of high-performance indicators and practical relationship, should be practical as a principle to avoid waste of equipment resources.
5. In the acquisition of imported instruments and equipment and domestic instruments and equipment relationship, where domestic instruments and equipment can meet the clinical requirements, should try to use domestic equipment.
Document name Principles of instrument and equipment equipment
Electronic file code ZYGL-04-006 Page 2-2
Third, the standards of grade hospitals.
The equipment of the hospital should not only meet the clinical needs, but also comply with the requirements of the Ministry of Health and the provincial (municipal) Department of Health (Bureau) on the grading criteria in the hospital grade review.
Document Name Principles of purchase of instruments and equipment
Electronic file code ZYGL-04-007 Page 3-1
I. Principle of having a certificate
The medical device products to be purchased (including imported and domestic) must have a medical device product registration certificate. These products should be examined by the medical device administrative department qualified access to the market. Unlicensed products can not be purchased.
Two, economic principles
1. Determine the price
Purchase of instruments and equipment, the first thing to determine the price, that is, out of how much money to complete the work of this equipment.
2. Preferred domestic products
Where domestic products in performance, quality can meet the requirements of foreign products do not have to be introduced, where only the import of the key host, the ancillary equipment can be purchased at home.
3. The pursuit of high performance-price ratio and low cost consumption
(1) in the purchase of models, machine performance and price is a pair of contradictions, high performance is bound to be high price. In order to evaluate the advantages and disadvantages of the products between manufacturers, the performance-price ratio is an important indicator. Should meet the requirements of clinical use under the premise of the price of the machine as low as possible, that is, to pursue cost-effective.
(2) After the instrument is put into use, there is a start-up cost problem, such as water, electricity, steam, labor, material consumption are start-up costs. The main consumption to be considered here is the consumption of materials necessary for the work of the instrument and equipment, such as reagents (paper), catheters and so on. Therefore, in the purchase of instruments and equipment should focus on the source of materials and dependence, the introduction of foreign equipment, the use of domestic consumable materials, which is the principle of low-cost consumption of the purchase.
4. Favorable payment methods
The ordering of equipment, equipment, inevitably involves the question of payment, is the installment or one-time payment? Is the deposit or pay the full amount, or to be installed, debugging, acceptance and payment? All such ways, should choose to pay the latest a way to make equipment equipment investment capital risk minimized.
Document name: Principles of purchasing instruments and equipment
Electronic file code: ZYGL-04-007 Page: 3-2
Three, technologically advanced, product maturity, the principle of superior quality
1.technologically advanced
Technologically advanced refers to the principles of the product, the structure of the scientific, advanced, the technical parameters of similar products in the leading edge of the comparison. Comparison of outstanding leading. To prevent the introduction of obsolete products due to lack of information.
2. Product maturity
Product maturity refers to the product is not a test product, but after a large number of clinical practice test, there is a broad user base. Do not adopt the manufacturer's first trial product easily, and do not trust the manufacturer's advertising.
3. Superior quality
Superior quality refers to the product's reliability, safety and durability in similar products are leading.
4. Believe in brand-name
Brand-name products are brand-name manufacturers through the performance of their products, quality, technology, reliability of the continuous development, improvement, enhancement and strict management of all aspects of the production, after fierce market competition and obtain the results. So buying a famous brand is to believe in the inherent quality of the factory. In addition, the brand-name manufacturers and pay more attention to after-sales service, so you can buy "peace of mind". Of course, the price of brand-name products will be more expensive than ordinary products, which will be based on the price point to weigh.
Four, the principle of functional application
Functional application is to make the best use of things, make full use of and play a role in the instrumentation and equipment resources, from the actual work of the clinic to choose a more practical function, too much choice of uncommon functions is not desirable. For example, the purchase of outpatient general examination of the instrument should be so, but for research, development of various types of clinical laboratory instruments and equipment, in addition to selecting the function of the current needs of the work, but also need to take into account the development of the discipline to increase the function, that is to say, we must choose a more complete function.
Document name: Principles of purchasing instruments and equipment
Electronic document code: ZYGL-04-007 Page: 3-3
V. Principles of excellent service
1. Training
Vendors should train operators and maintenance personnel to ensure normal start-up and routine maintenance.
2. Vendors should provide detailed drawing information, operating manuals and maintenance manuals for the instruments and equipment purchased by users. Should ensure that maintenance spare parts can be provided in a timely manner.
3. After-sales service
Should strive to extend the free warranty time. In after-sales maintenance should be fast response time, troubleshooting ability to achieve the purpose of high open rate.
Document Name: Management System for the Use of Instruments and Equipment
Electronic Document Code: ZYGL-04-008 Page: 4-1
Purpose
In order to ensure that the instruments and equipment in a longer period of time can operate normally, give full play to its diagnostic and therapeutic functions, and maximize the production of social and economic benefits, it is necessary to do a good job of management of the use of instruments and equipment.
Two, the task
1. do a good job of preparation before use
(1) do a good job of equipment before the arrival of the installation of equipment preparation
Equipment before the arrival of equipment to do a good job of housing, electricity, water, air-conditioning, sewage and the relevant contract outside of the preparation of their own supporting accessories and other supporting preparations to ensure that equipment in line with the provisions of the environment under conditions Settle down.
(2) good operator training
Large medical equipment or valuable instrument operators, should be in the equipment before the arrival of the equipment, to the parent hospital or factory for the use of technical training, should obtain the operating license or qualification certificate, so that the equipment can be put into use after installation.
(3) do a good job of installation, commissioning and acceptance
This step is very important, it is related to the ordering of equipment and equipment in line with the contract requirements, its function and performance indicators are in line with the theoretical value and to achieve the best state, but also related to the service life of the equipment. In short, it is directly related to the interests of users. For this reason, to be organized, step by step, standardized to carry out this work:
①Organization of special people to open the box acceptance, and make the original records. This step of the work is mainly on the product packaging, appearance, variety, specifications, number of models, such as checking inventory, if necessary, but also available photographic methods to record the acceptance of the site and in kind. Participants should include equipment managers, procurement and maintenance personnel. For large-scale medical equipment or valuable instruments to open the box also need to have the use of departmental representatives, equipment and equipment department heads, hospital leaders in charge of equipment and manufacturer's representatives to participate. If the manufacturer's representative
Document Name Instrument and Equipment Use Management System
Electronic Document Code ZYGL-04-008 Page 4-2
cannot be present, the box can only be opened with the authorization of the manufacturer's representative, so that the action of opening the box is effective. If a problem is found during the unpacking and acceptance, negotiate with the vendor to resolve the problem, make a claim, or even return the product.
②Installation, commissioning and acceptance. For small and medium-sized instruments and equipment, this work is generally completed by the maintenance staff, and write a good installation, commissioning, acceptance report for archiving purposes. For large medical equipment or valuable instruments generally sent by the manufacturer to complete the engineer. This unit of maintenance personnel to follow the shift with, and thus get an on-site technical training. Installation, commissioning work should be serious, meticulous, to debug one by one against the technical conditions of the product, a test, never generalized rough look at the image, try it on the end of the matter.
For large-scale medical equipment or valuable instrument performance acceptance, but also to organize a person to carry out, the participants should include the unit in charge of equipment, equipment, equipment, equipment management department responsible for the use of the department responsible for the specific operators and maintenance engineers, if necessary, but also to ask the parent unit has been used in the equipment experts, *** with the function of the equipment, features, clinical application of the effect of the equipment, etc. Acceptance. After acceptance, the factory should write the installation, commissioning, acceptance report, signed by the supply and demand side representatives on the report, the device equipment can be put into use, quality assurance period from this point onwards.
2. Do a good job of long-term management of the use period
(1) the means of management
Devices and equipment to be installed, commissioning, acceptance, delivered to the department to use, the beginning of a long period of use, until the end of life. Then in the use of the period, equipment management department how to do a good job of management? The general use of the establishment of accounts, files, regulations, systems, etc. as the main means of use management.
1 ① account: equipment and equipment purchased to be accepted, the warehouse will be based on the classification of fixed assets or consumables account, the implementation of a unified financial management.
② archives: for instruments and equipment, to establish equipment files. Specifically by the full-time or part-time archivist is responsible for. When the instrumentation installation, commissioning, acceptance, the archivist will collect the following three aspects
Document name Instrumentation and equipment use management system
Electronic file code ZYGL-04-008 Page 4-3
The information to start the establishment of instrumentation files, preparation for the purchase of information: application reports, demonstration forms, order cards, contracts, acceptance records, product samples and so on. samples, etc.
Instrument and equipment random data: use and maintenance manuals, wiring diagrams and other related information.
Management information: operating procedures, maintenance system, application quality testing, measurement, use of maintenance records and transfer, scrapping records.
③Establishment of operating procedures and systems: In order to prevent man-made damage to equipment and equipment, give full play to the functions and characteristics of equipment and equipment, to extend the service life, the use of the department should be: A. The first time to start the use of equipment should be formulated before the use of equipment and equipment operating procedures.
B. Operators should strictly abide by the operating procedures.
C. Establish a use file to record daily or each use.
D. Regular maintenance.
E. Failures or anomalies should be reported immediately to the equipment management department for timely handling and maintenance.
F. To accept the assessment work of equipment utilization rate.
(2) the way of management
In order to improve the utilization rate of equipment, different types of equipment should be selected for different types of equipment management.
①Exclusive use or centralized public use: managed by specialized sections, operated and used by specialists, the user does not go on the machine, the operator provides test, diagnosis, treatment reports, is a form of resource **** enjoyment.
② special management **** with: special management **** with special management, so that the performance of instruments and equipment at any time to maintain a good state for the user with a license to operate the use of user personnel on the machine. Hospital operating room instruments and equipment belong to this type, which is also a form of resource *** enjoy.
3 ③ exclusive exclusive use: some conventional ward equipment such as monitors, suction, first aid apparatus and other instruments equipped in each department, the scope of its application is limited to the department.
Document Name: Management System for the Use of Instruments and Equipment
Electronic Document Code: ZYGL-04-008 Page: 4-4
④Rental Method: Letting the user pay a portion of the rent for the right to use the equipment for a certain period of time, so as to avoid the waste of medical equipment being left unused.
Document Name: Maintenance and Repair Management System for Devices and Equipment
Electronic File Code: ZYGL-04-009 Page 3-1
Purpose
To ensure that devices and equipment are always in a normal state of good condition, in order to satisfy the clinical needs for devices and equipment.
Second, the task
To do a good job of daily maintenance, maintenance or measurement and calibration of non-faulty instruments and equipment, the instruments and equipment can not function properly to find ways to eliminate the problem in the shortest possible time.
Three, institutions and personnel
Equipment management department should generally have a professional maintenance room or full-time maintenance personnel, through the scientific and reasonable division of labor and the organic combination of personnel, as the completion of the maintenance of equipment and equipment, maintenance tasks to ensure the organization.
Four measures
1. mobilize the enthusiasm of maintenance personnel, equipment maintenance work
(1) in the medical institutions, should be treated the same as other business sectors of the technical staff to participate in the assessment and promotion. Those with outstanding contributions may be promoted out of the ordinary.
(2) The cultivation, training and re-education of medical engineers and technicians should be emphasized and strengthened, so that the comprehensive theoretical knowledge learned in school can be changed into professional and technical knowledge and practical work skills, and through the updating of knowledge to continuously adapt to the development of new technologies in clinical medical engineering. To often participate in the unit has been equipped with instrument maintenance training courses and academic seminars, from which to absorb the more direct maintenance knowledge.
(3) study the law of equipment failure, passive maintenance for active maintenance. Equipment failure law is the development and change law of equipment failure in the life cycle. Equipment failure rate of the development of the shape of change is very much like a bathtub section, so also called "bathtub theory", for different periods of failure, to take the appropriate countermeasures.
Document Name: Instrument and Equipment Maintenance and Repair Management System
Electronic Document Code: ZYGL-04-009 Page: 3-2
(4) Establish a performance appraisal system for maintenance personnel, and record their attitude, maintenance workload, technological innovation achievements, and theses in their personal files, in order to increase the motivation and sense of responsibility of maintenance personnel.
2. Establish a complete set of maintenance management system, from the system to ensure the normal operation of daily maintenance work.
(1) a reasonable division of labor and combination of personnel
The hospital's instruments and equipment is a contradiction in terms of the number of maintenance personnel. The solution to this contradiction is the first maintenance personnel to division of labor, so that they have their own job responsibilities, have their own focus on the main direction of the profession, so that each maintenance people have their maintenance of a particular type of equipment expertise. The so-called combination of maintenance tasks undertaken by each maintenance personnel, maintenance of the category of the instrument is part of the cross-repeat, so that the cross-repeat of this type of instrument maintenance can be taken in the form of collaboration, you can play the collective wisdom, but also to avoid the emergence of unmanned maintenance in the absence of some people.
(2) the establishment of the maintenance personnel job responsibility system
receiving repair to be registered, pick up pieces to be canceled, maintenance to write a maintenance report and personal workload records, to do a good job in the spare parts program, in the work of timely instructions and reports, so that the work is carried out in an orderly manner, to be responsible for the individual division of labor of the instrumentation for the equipment intact rate of assessment, and so on.
(3) the supply of spare parts
specialized purchasing and maintenance personnel purchasing combination, the instrument warehouse should be stocked with common maintenance parts, such as various types of light bulbs, sphygmomanometer various parts, oxygen inhaler of various accessories and so on. The maintenance of the faulty spare parts to consider making a good backup.
(4)Preventive maintenance system
For the key equipment that is prone to mechanical wear and tear, loose screws, such as surgical shadowless lamps, surgical beds, autoclave cabinets, etc., the implementation of regular preventive maintenance.
(5) Establishment of a safety inspection system
Document Name Instrument and Equipment Maintenance and Repair Management System
Electronic Document Code ZYGL-04-009 Page 3-3
Periodic inspections are carried out on the safety of key equipment, such as the safety of electricity and the safety of the surroundings, in order to ensure safety in the use of medical equipment.