Cyclone dust collector is a dust collector that utilizes the centrifugal force generated by the rotating airflow to separate dust particles from the dust gas flow
departed from the dust removal device. It has a simple structure, small size,
No special ancillary equipment, low cost. The resistance is medium, no moving parts in the device, easy to operate and maintain and so on.
Cyclone dust collector is generally used to capture particles above 5-15 microns.
Dust removal efficiency of up to 80% or more,
In recent years after the improvement of the special cyclone dust collector.
The dust removal efficiency can reach more than 5%.
The disadvantage of cyclone dust collector is to capture particles smaller than 5 micron efficiency is not high.
Cyclone dust collector and dust particles in the movement profile:
The vast majority of the rotating gas flow along the wall of the round body, spiral from the top down to the bottom of the cone movement, the formation of falling external rotation of the dust-containing gas flow, centrifugal force generated in the process of strong rotation will be far greater than the density of the gas particles thrown to the wall of the device,
Once the particles and the wall of the dust particles in contact with the wall, it will be lost
To remove the inertia of the particles, the dust particles will be removed. p>
Get rid of the inertia force and rely on the momentum of the entrance speed and their own gravity along the wall down into the dust collection hopper.
The rotating downward airflow reaches the bottom of the cone. Along the axis of the dust collector parts turn upward. Formation of rising internal spiral airflow, and by the dust collector exhaust pipe discharge. Another small part of the airflow from the air inlet,
the cyclone dust collector to the top of the flow, and then along the outside of the exhaust pipe downward flow, when it reaches the lower end of the exhaust pipe,
that is, the reverse turn upward with the rise of the center of the airflow together with the exhaust pipe from the slander, the dust particles dispersed in which are taken away with it.
Hello! Dust collector customization expert:?021-64779658
Customized dust collector, I suggest to look for manufacturers who have had experience in dust collector customization, because it can reduce a lot of your time cost, and it can give you a lot of advice about dust collector customization.
Dust collectors, in the old days not to mention, are commonly used dust collectors. Now that the standard of living has improved, basically imported dust collectors. This can increase the sales of dust collectors. Often there will be staff to make suggestions that to change to imported dust collector. We also tried to change many imported dust collectors. The result was great sales! Later on, we made a comprehensive customized program of imported dust collectors. We have been working with this manufacturer for 4 years without any quality problems!
Personal advice for choosing a dust collector:
The first three points are the same as yours, warranty, safety certification, direct manufacturer.
These three points, just to give us peace of mind, product warranty so that we worry less, safety certification so that we know that the product is not a problem, the manufacturer produces fast efficiency, and saves a lot of cost. Cut out a lot of the middle ground.
I personally think the most important point is: dust collector to adapt to your workstation, this is the most important; and to use environmentally friendly materials, so that consumers are more assured!
Personal advice:
In this regard, as long as you are not a remote area, Tibet, those words, I recommend that you look for a factory in Shanghai, where the dust collector manufacturer base. Transportation through the logistics, a few days to receive the goods! We chose: "qi pulse dust collector". It's so worth choosing, no safety or quality problems since 2010. The effect after vacuuming is also very good!