Products with hoses should be careful to make the hose often keep the natural stretch state, so as not to break.
2, the bathtub faucet rosette metal hose should be kept in a natural state, do not coil it on the faucet when not in use.
At the same time, in use or not in use, pay attention to the hose and the valve body of the joints do not form a dead end, so as not to break or damage the hose.
3, occurred in the spiral stabilized rubber spout closure is not complete, usually due to harder debris stuck in the sealing mouth howling when you just need to remove the handle, unscrew the valve cover, the valve core to remove impurities can be mounted as is to return to normal use.
4, occurs in the ceramic piece spool sealing spout closure is not complete, it may be hard debris abrasion sealing surface or the spool of the added preload is not enough.
5, in the event of leakage of the connection parts of the water nozzle, usually assembly moment parts are not tightened due to the need to tighten only.
If the amount of water dripping out is equivalent to the remaining water in the mouth of the spout after the closure of the water source, is a normal phenomenon.