How to use ultrasound therapy machine?

Si recovery ultrasonic use

Ultrasonic, through the U.S. FDA authoritative certification, the use of focused ultrasound technology, the use of non-invasive and effective stimulation of collagen proliferation. For skin laxity, fine lines and wrinkles, difficult to treat neck lines, marionette lines, crow's feet, etc., can play a very obvious lifting effect, while improving the jaw line, so that the contour lines of the face is more firm and beautiful. The method of use is introduced as follows:

Tools/materials

Si Recovery Recovery equipment host, ultrasonic probe, essential oils (or your use of maintenance products, weight loss cream).

Methods/steps?

The first step is to prepare the raw materials: Si recovery recovery equipment host, ultrasonic probe, essential oils (or you use the maintenance products, weight loss cream).

Step 2: Connect the host, the other end of the ultrasonic probe can be connected to the host.

Step 3: Turn on the switch of the host computer - select the treatment time (usually 10-20 minutes per treatment).

The fourth step: the prepared oil (serum, masks and other beauty care products, local weight loss can be used to lose weight cream) applied to the face. Press the "ultrasonic" button, respectively, "low, medium, high" three gears can be adjusted.

Step 5: Place the ultrasonic probe on the part to be imported, rotate clockwise, avoiding the upper eyelids, around the eyes and the side of the face can be lifted upward to increase the sense of three-dimensional face.

Note

1, pay attention to the treatment of the use of time is not too long, can be used 3-4 times a week, each time 15-20 minutes;

2, the use of the eyeballs to avoid unnecessary stimulation of the eyes;

3, after the use of water will be cleaned with water to clean the probe to be stowed away.