2, the design of the finished product generally can not be done perfectly, and even can not be used, direct production once the defects will be scrapped, a big waste of manpower and material resources and time; and the general situation is a hand plate a small number of Christine products, production cycle is short, the loss of manpower and material resources, and very quickly to find out the shortcomings of the product design and then improve the product for the product finalization of the mass production to provide a sufficient basis.
Question 2: A product needs to do prototyping, how to make out? Generally do the template proofing is mainly through the c processing, silicone re-modeling and 3D printing and other ways to make out, do the template proofing can find the top model
Question 3: open molds and templates are what is meant by open molds refers to high-volume production of the product, while the template refers to the general product development out of one or several samples, and now a small batch of production to do the general use of the vacuum re-modeling way to do, I hope that the top small way to do, I hope that the top of the small Liu my answer to this let you satisfied.
Question 4: Who will speak to the production of the hand plate What is the hand plate?
The hand plate I believe most people do not know what is, but most of the R & D and designers are more aware of the hand plate model, yes ah designers to complete the product design does not have to open the mold, we made according to the appearance of the product or the structure of the drawings of a product or a few of the same with the real product is used to check the appearance, structural reasonableness or as a market research samples, which is the hand plate prototyping.
According to Topsy's 15 years of production of handboard statistics common handboard production methods are the following three ways, respectively:
CNC computer gongs: CNC is a computer numerical control machine according to the programmed program with a piece of the whole board digging into, relative to the SLA is more expensive to meet the handboards of a lot of kinds.
SLA laser molding: SLA laser molding is a computer-controlled ultraviolet light, in accordance with the pre-written program layer-by-layer scanning and stacking curing and become the closest to the design file, high precision, single piece of speed. (Disadvantages of SLA material is easy to break, need to do fast mold supplement, adapt to the production of multiple sets of product prototypes)
Repeat mold (vacuum infusion): Vacuum re-molding is the use of the original prototype, the production of silicone molds in a vacuum state, and the use of PU materials in a vacuum state for pouring, so as to clone with the original prototype of the same, more than the original prototype of the high-temperature resistance, strength and hardness of the replica production is better, if the If customers request to do several sets or dozens of sets, it is suitable to use this method, which greatly reduces the cost.
I hope this can help you.
Question 5: What are the general ways to do prototyping? How long is the processing time? To do hand plate proofing processing methods have c processing, 3D printing and silicone remodeling, processing time is needed to look at the product 3D drawings to assess, you can send drawings to the top-dimensional model to help you assess; 16 years of hand plate factory
Question 6: hand plate processing production sampling is to choose a good CNC machining or 3D proofing is good 1. The decision of the way to make the hand plate, depending on the size of the product, Sample materials, requirements (appearance, structure) and so on.
2. In addition, are you going to do for others, or ready to do it yourself.
3. Hand plate sampling has a variety of means of manual, laser molding, machining, 3D printing and so on.
1) In the absence of appropriate equipment, CNC technology is backward, hand plate production is mainly done by hand, the material, the process has great limitations. For example, the design of large cars and boats. Now there are very few handmade boards.
2) Laser rapid prototyping is a process using the principle of three-dimensional engraving. Is the earliest emergence of a rapid prototyping technology, can directly get the resin or similar engineering plastics products. Rapid prototyping of the hand plate surface quality is better, the system has high resolution, high molding accuracy.
3) CNC machining to produce a wide range of handboards, the technology is relatively mature. The effect as well as the precision is also very good.
4) 3D printing is a kind of rapid prototyping technology, it is a kind of digital model file as the basis, the use of powdered metal or plastic and other bonding materials, through the way of layer by layer printing to construct the object of the technology. 3D printing technology is still to be further improved.
4. The choice of prototyping process:
1) Micro-small, complex, suitable materials, appearance inspection-oriented board, you can choose 3D printing.
2) Large, may still have to be handmade.
3) general, to use the metal material sampling, may be more suitable for machining.
5. If you are a new business, ready to walk into the industry. It is recommended to look at the hands of the work received, the direction of the future to decide the way.
6. The key is how much money you have in hand, what equipment you can buy.
7. The first push is the way of mechanical processing.
Question 7: Who knows where to do handboard proofing good? This top-dimensional model is not bad ~ ~
Question 8: How much does it cost to make a prototype? How long is the production cycle? 10 points to assess the cost of hand plate proofing is to look at the 3D drawings, the accurate production cycle is also to look at the drawings; the general situation is 3-5 days, do hand plate proofing can find the top-dimensional model
Question 9: What are the classifications of the hand plate (office) model processing and proofing production? What is the main meaning? Is it to say that the production methods which, or ask the production materials?
Our top-dimensional model production methods handboard proofing is generally divided into: CNC machining, 3D printing, vacuum lamination of these kinds;
The production of materials are divided into many kinds: ABS, acrylic, PC, PP, nylon, resin, silicone, soft plastic, aluminum alloy, stainless steel, copper, magnesium alloy and so on.