How can the car navigation not connect to the internet
Open the network **** enjoy, and then find the replacement adapter to see if the wireless is turned on. If it is on, you can go to Properties to see if it automatically gets the network address in the Internet Protocol. dhcp on or off can basically solve it.
To use the GPS navigator, you only need power. With an internal integrated GPS antenna and receiver, it can automatically locate, calculate and display results without the need for an internet connection. However, if you need to transmit positioning data to other remote devices, the GPRS module is usually integrated again and the data is transmitted using a public **** network.
If the navigator has a WIFI function, it can receive WIFI signals, otherwise it cannot receive WIFI signals. wifi connection steps are as follows:First, open the navigator's WIFI function, and then search for wireless signals, and then access to the wireless signals, click on it, and then enter the account number and password to connect. With the function of GPS global positioning system, you can know your exact location anytime and anywhere while driving.
Car navigation with automatic voice navigation, best path search and other functions, so you can shortcut all the way, unimpeded. Integrated office and entertainment features allow you to travel easily and efficiently. GM car navigation features include DVD player, radio reception, Bluetooth hands-free, touch screen, optional features, smart track reversing, tire pressure detection function, virtual six-disc and background control.
How Car Navigation Works
Car navigation has a global positioning system (GPS) function. As long as the driver inputs the destination into the car navigation system, the system will automatically calculate the most suitable route according to the electronic map and remind the driver to follow the calculated route during the car traveling. Car navigation is usually embedded (in the car itself) and portable. Let's see how to use car navigation.
Embedded navigation is used in different ways depending on the make and model. The general steps are: turn on the navigation; enter the map, wait a few seconds for the navigation to locate according to the GPS (the location of the vehicle); there will be a lot of buttons on the navigation, there will be text prompts on it, and we can search for destinations we need to get to (when you enter the destinations, you only need to enter the first letter of each word. Some navigation support voice, directly say it) and set as the destination; after the completion of the setup, the interface will appear on the system's planning route, and then we can click on the interface according to the prompts to start navigation.
Portable navigation, start in the car after the cigarette lighter, and then the car positioning will be displayed from the portable navigation. Then enter the destination we want to go and set it as the destination. After the route planning appears, click to start navigation. You should pay attention to the following points when using the portable navigation:
1. After each use, close the page first and then turn it off. The front of the cigarette lighter is pulled out last. If you pull out the front of the car directly, the navigator will be forced to close, and the electronic components inside will be damaged over time.
2. In summer, it is best to put the navigation away and put it in the shade before each time you get out of the car. Because if it is often exposed to sunlight, it will affect the battery life. How can car navigation not connect to the network How to use car navigation @2019