Machining plant safety production emergency plan
In real life or work and study, sometimes there will be some unexpected events or accidents, in order to minimize the harm caused by accidents, from time to time to carry out in advance the preparation of emergency plans. So how should the emergency plan should be prepared to be appropriate? The following is what I have organized for you, I hope to be able to help you with the emergency response plan for the safety of the machining plant.
Mechanical processing plant safety production emergency plan 1
Under the guidance and supervision of the Municipal Safety Production Committee, the company conscientiously implement the national safety production regulations and provincial and municipal decrees on safety production, in accordance with the elimination of fire hazards, and put an end to the requirements of the accident of mechanical injuries in the strict implementation of the company's development of the "safety production management system", "pine seed kernel (nut) processing plant area fire ban Provisions", "fire safety responsibility system" and "safe production of mechanical operating procedures" on the basis of the development of the company's production safety emergency plan template.
First, the organization and leadership of the emergency plan
1, the company's general manager for the implementation of the production safety emergency plan template of the first responsible person. In case of fire and production accidents, should be the first time to the scene, organize the implementation of fire fighting and rescue work.
2, the plant manager and production safety management personnel for the production safety emergency plan template implementation of direct responsibility. When a fire and production accidents, you must immediately dial "119" and "120" telephone alarm, while reporting to the general manager, take emergency measures to protect the company's property and personal safety of employees, and cooperate with the fire department and first aid center to implement fire fighting and rescue. The company's first-aid center is located on the south side of the city.
Second, fire emergency measures
1, when the fire accident occurred, in the first time by the general manager of the company, the factory director and production safety management personnel composed of the command, counting the number of workers, arrangements for alarm and self-help.
2, the factory electrician immediately cut off all power supplies in the factory, while starting the yard well, to ensure that the water for fire extinguishing.
3, safety production management personnel in the evacuation of workers at the same time, in accordance with the company's division of fire prevention work, in the fire trucks have not yet arrived, the organization of workers to use the plant's fire hose and fire extinguishing equipment to carry out self-rescue, control the fire, waiting for rescue.
Third, the production accident emergency measures
1, processing, drying and other workshops if there is a production accident, the director of the workshop and the scene of the first witness to the first time to call for help, while reporting the plant manager and general manager.
2, such as mechanical injuries, production safety management staff immediately shut down the machinery, the organization of the injured to stop bleeding and other emergency care, and arrange for special care, waiting for the ambulance first aid.
3, the injured personnel to have a special escort to the hospital treatment, arrange financial personnel to the hospital in person for the relevant procedures to ensure the implementation of effective rescue.
Fourth, fire, production accident emergency organization
1, fire fighting emergency organization
① by the company's general manager and the branch and department heads of the fire extinguishing headquarters, responsible for the organization and implementation of the emergency plan.
② The establishment of the company's volunteer fire department. After the fire and professional fire department arrived before the fire, control the spread of fire or put out the fire at the primary stage.
③ Volunteer fire department by the organization's male employees and branch workers. Divided into three groups: water gun fire extinguishing group. By Liu Desheng is responsible for, the use of the courtyard wells and building hydrants to extinguish the fire; foam fire extinguishing group. By Shi Tiezhang is responsible for, the use of the building and the plant's foam fire extinguishers to extinguish the fire; alarm communication group. By the janitor is responsible for, timely alarm, maintain order in the plant, guide the fire truck to extinguish the fire.
2, production accident emergency organization
① by the company's general manager and branch and department heads composed of production accident self-help emergency response headquarters, responsible for the implementation of the production accident emergency plan.
② Formed by the plant manager and workshop director responsible for mechanical injury self-help group. In the unlikely event of a production accident, cut off the power supply, rescue injured people, alarm for help.
③ set up by the deputy general manager and financial personnel composed of rescue group. Responsible for accompanying the injured personnel to the hospital for treatment.
④ set up by the office and the head of the business department composed of the accident report group, with the relevant departments to deal with the aftermath of the accident.
Fifth, prevention-oriented, to eliminate accidents
1, the company and branch factories and departments, in the strict implementation of the company's fire prevention and safety production of various rules and regulations at the same time, to strengthen the management of production safety, put the prevention of the first place. Strict governance of all irregularities and violations of production safety behavior, increase the hardware facilities to change and construction, to ensure timely elimination of hidden dangers, to ensure safe production.
2, increase the publicity of production safety. Improve the production safety awareness of all workers and all workers to deal with emergencies, the ability to implement emergency plans, to ensure their own safety and reduce losses to the enterprise, timely alarms, reports, make full use of "119", "120" and other first aid.
3, the emergency plan twice a year drill, the job training for each type of work twice a year, special types of work must be licensed. The emergency plan measures to implement the specific responsibility of the person to ensure that prevention is the mainstay, no accidents. Once an accident occurs, start the emergency plan in time.
The above emergency plan is implemented to the authorities, factories, workshops, shifts, and follow the implementation.
Machining plant safety production emergency plan 2
Based on the "People's Republic of China *** and the State Production Safety Law", "Inner Mongolia Autonomous Region Production Safety Regulations", "National Emergency Response Plan for Production Safety Accidents and Disasters" laws and regulations as a guide to popularize the knowledge of production safety to form a safety for all to talk about safety, everyone to be safe situation. Enhance the awareness of safety precautions specially formulated this plan.
First, the scope of application: This plan applies to the field (the) occurred in the safety of production accidents.
Second, the principles of emergency rescue work: people-oriented, safety first, prevention-oriented, unified leadership, hierarchical responsibility.
Third, the forest has a safety emergency organization, under the
Rescue group:
Leader:
Deputy Leader:
Members:
Information group:
Leader:
Group member:
Once a safety accident occurs in the operating site, it is immediately reported to the forest management. Once a safety accident occurs at the operation site, it will be reported to the dispatching office of the forestry field and the emergency team will be notified by the dispatching. By the information team leader immediately report to the Forestry Bureau and dial 120 to the medical emergency center for assistance emergency report includes the following: the time of the accident, location, category, the number of accidents.
First aid group:
Group leader:
Group members:
After receiving the accident emergency report, immediately deployed spare rescue emergency rescue vehicles quickly rushed to the accident scene to implement rescue. Standby vehicle driver phone 24 hours open, but there is an emergency accident notify the driver immediately set off the forest health clinic standing medical first aid supplies, each team, section, group set up a field self-rescue team members by the main members of the team to serve as the leadership of the forest safety organization is responsible for regular training and drills.
All members of the emergency response team organization should establish the point of view of receiving an alarm is an order, set up a people-oriented thinking, courageous, scientific, calm response to the accident quickly and effectively carry out rescue work to make the forest safety production of the accident to zero.
First, the organizational structure of the fire emergency:
1, in order to coordinate the command, the factory to determine the registered safety director for the fire commander-in-chief, is responsible for the fire emergency when the overall command work. Registered safety director in the fire is not in the plant when the commander-in-chief by the plant's vice president of administration; holidays by the factory arranged by the ` duty officer in charge of;
2, security team leader is the deputy commander of the fire, under the leadership of the commander-in-chief of the scene is responsible for the specific fire rescue work; the departments responsible for the scene of the command;
3, the commander-in-chief, the deputy commander-in-chief and scene commanders should be in the The general director, deputy director and on-site director should be rushed to the fire scene within the first time after receiving the fire alarm;
4, in order to cooperate with the fire rescue work, the factory has set up a fire commando team, composed of security guards and grass-roots backbone of each workshop. Under the leadership of the commander-in-chief and on-site command to carry out specific work or assist the fire department to participate in the fire rescue work;
5, each department or workshop in the fire should be ready to listen to the commander-in-chief of the dispatch, to participate in the fire rescue work.
Second, the fire occurred in the early stages of the emergency response work:
1, in the department (or workshop) in the event of a fire, the employees on duty should be immediately on the incipient fire, the principle of proximity to the use of fire-fighting equipment (such as fire extinguishers, hydrants, etc.) to extinguish the fire; the use of fire extinguishers should pay attention to the following key points: the first to pull open the safety pin, the operator Standing in the upwind position, side operation, hand pressure handle, two meters from the fire point position hose aimed at the source of the fire swept;
2, when the fire can not be controlled, we must immediately notify the security guards on duty and the person in charge of security (the Division by the Department of Human Resources as a supervisor);
3, the security guards on duty to receive the fire alarm, immediately notify the entire plant alert and notify the head of the security team to quickly mobilize the use of all security guards around the fire scene to participate in the fire fighting equipment, and the fire extinguishing equipment. Fire extinguishing equipment to the fire scene to participate in the fight, and do a good job in the fire scene personnel order maintenance and the evacuation of unrelated personnel;
4, when the fire spread to the extent that the power of the plant can control, the employees on duty should be immediately knocked out of the glass to press the fire button to use the fire hydrant, and arrange for the alarm - 119, (the alarm should be detailed to the fire department). (Alarm personnel should report to the fire department in detail on the scene of the fire
situation, including the name of the unit of the fire and the specific location, burning materials, people surrounded by the situation, contact phone number and name and other information), and arrange for personnel to the intersection to receive the fire truck, so that firefighters to grasp the fire situation and as soon as possible to arrive, to take the appropriate measures to extinguish the fire, to seize the opportunity to save the day;
5, Fire Emergency The commander-in-chief and on-site commanders should be rushed to the fire scene in the first time after receiving the fire alarm to direct the fire-fighting work, direct the equipment maintenance team to force the elevator down to the ground floor, and cut off the power supply of the production area, while ensuring the normal operation of the various fire-fighting facilities;
6, fire alarms should be immediately cut off the power supply of the departments, and organize the evacuation of their own departments (or workshops) to the safety of the area on standby;
7, Human Resources Department to immediately cut off power supply, and organize the evacuation of the department (or workshop) to a safe area on standby. p> 7, the Ministry of Human Resources immediately organize the driver to evacuate the parked vehicles in the plant and the obstacles in front of the plant to ensure that the disaster relief site and the smooth flow of vehicles with emergency.
Third, the fire extinguishing and fighting work:
1, the fire emergency commander in chief according to the scene of the situation of the fire brigade to carry out a preliminary division of labor, were set up to extinguish the fire group, rescue group, water supply group, logistics group, and other groups, to do a good job before the fire department to come to the auxiliary work: such as the investigation of the fire, the people trapped in the situation of the preliminary estimate, the fire equipment, the preparation for the fire, and the fire fighting work. Preliminary estimate, the readiness of the fire fighting equipment, the smoothness of the relief road, etc., and keep in touch with the fire department at any time to report the situation;
2, when the fire department arrives, the chief emergency commander and the chief on-site commander should immediately report to the firefighters in detail about the fire situation, and assist the fire department to formulate the fire-fighting program;
3, the firefighting team should be "saving lives is more important than fighting fires", the firefighting team should be "more important than fighting fires". Save people more important than fire", "first control after elimination" principle decisively assist the firefighters to participate in the fire fighting tasks;
4, each department (or workshop) supervisors at any time for the firefighters and the fire commando team to provide the fire scene specifics for fire fighting work to provide effective advice, and at any time to listen to the emergency commanders to provide the firefighters and the fire commando team. Suggestions, and always listen to the emergency director of the dispatch to participate in the fire fighting work to go, and actively cooperate with the medical personnel involved in first aid care work to minimize casualties.
Fourth, the fire accident processing work:
1, after the fire is extinguished, each department (or workshop) should immediately count the department (or workshop) of the personnel and damaged materials, as soon as possible to determine the casualties and the loss of goods and to the factory safety committee report, the safety committee should be made a detailed record and archives;
2, Human Resources Department should coordinate with the ministries as soon as possible to do a good job of medical care, including the provision of medical funding, hospitalization arrangements for injured personnel and care and accidental injury insurance claims, etc.;
3, equipment maintenance group with the relevant departments (or workshop) personnel on the damaged equipment as soon as possible to arrange for repair and put into production production use;
4, to the director of the safety as the main, the safety committee members of the joint The establishment of the accident investigation team, investigate the cause of the fire and according to the "four do not spare" principle of accident processing;
5, the safety committee to make the accident investigation report, while summarizing the lessons of the fire incident, the implementation of security incidents in all employees in the education and training, to prevent the recurrence of similar events.
V. Evacuation self-help methods:
1, familiar with the environment, not panic in the face of danger: everyone should live and work in the residential building structure and familiar with the escape exit, and usually should be done to the chest, and when in an unfamiliar environment should also be developed to pay attention to the channel and the exit of the orientation of the habit, to facilitate the critical moment to escape from the scene;
2, stay calm and calm.
2, remain calm, clear direction: sudden fire should remain calm, do not blindly follow the crowd and crowd each other, try to run to the open or bright places and floors below. If the channel is blocked, you should turn your back to the direction of the smoke and fire, through the balcony, windows and other outdoor escape;
3, out of danger, not property: do not be shy or take into account the valuables, a waste of valuable time, remember that life is most important;
4, easy to protect, cover the nose creeping: to the route of the smoke, you can use a wet towel or wet blanket to cover your nose and creeping evacuation;
5, Make good use of the channel, do not enter the elevator: fire try to use the stairs, or the use of balconies, window sills, roofs, etc. to climb to a safe place, or the use of downpipes to slide down the stairs to escape; can not enter the elevator to escape;
6, place of refuge, fixed to wait for help: such as in the room side of the hand touching the door, feel the hot hand, never open the door, should be tight to meet the fire of the doors and windows, open the back of the fire of the windows and doors, wet towels stuffed with cracks, and keep water wet to prevent smoke and fire seepage. Keep wet with water to prevent smoke and fire infiltration, solid room, waiting for rescue;
7, pass the signal, seek assistance: be surrounded by smoke and fire as much as possible in the balcony, window (daytime can be brightly colored clothing in the window shaking, the night can be used to flash flash flashlights and other things or knocking objects to make a sound to call for help) to pass the signal to call for help;
8, the fire has been close to the body, do not run in fear: If the body is on fire do not run in fear and clap with your hands, run in fear! and beat with your hands, running and beat will only form the wind, accelerate the oxygen supplementation, promote the fire. The correct approach is to immediately take off your clothes or roll on the ground, suppressing the fire, can jump into the water in time or let people pour water on the body more effective;
9, slow escape, slip rope self-rescue: high-rise floors after the fire quickly use the side of the ropes, sheets, curtains, etc. to make a simple rope and wet with water from the window or balcony along the rope slip to the following floor to escape. Even if you jump from a building, you should consider this method only when the firefighters have prepared an escape air cushion and require the floor to be below the fourth floor. You can also choose the pool, soft canopies, grass, etc., if possible, you should first drop a large number of quilts, sofa cushions or open a large umbrella to jump down.
;