State Radio Regulatory Commission, the State Bureau of Technical Supervision on the production of radio transmitting equipment management regulations

Article 1 in order to strengthen the production of radio transmitting equipment management, according to "the Chinese people's *** and the State Radio Regulations", "the Chinese people's *** and the State Product Quality Law" to formulate the provisions. Article 2 Where the Chinese People's Republic of China *** and the territory of the production (including trial production, the same below) radio transmitting equipment must comply with these provisions. Article 3 In this provision, radio transmitting equipment is defined as a variety of radio wave emitting equipment, but does not include industrial, scientific research, medical equipment, electrification and transportation systems, high-voltage power lines and other electrical devices that can radiate electromagnetic waves. Article IV production of radio transmitting equipment, are subject to the Office of the State Radio Regulations Commission (hereinafter referred to as the State Office of the Commission) on the emission characteristics of the type approval, the issuance of "radio transmitting equipment type approval certificate" (see Annex 1) and type approval code (see Annex 2). Factory equipment shall be marked on the label type approval code. Article engaged in radio equipment emission characteristics of the approved test institutions, product quality supervision and management department of the people's government at or above the provincial level or its authorized departments to assess the qualifications, and through the metrological certification by the State Office of the Commission without recognition.

Tested and certified by the metrological testing organizations, such as radio equipment can not be approved for some of the emission characteristics of the test, the State Office of the Commission may temporarily designate the other has been accredited by the China Laboratory Accreditation Board or metrological certification and has the ability to carry out this testing organization. Article VI for "radio transmitting equipment type approval certificate" procedures:

Application and acceptance

Central, relevant ministries and commissions of the State Council and its directly under the agency's manufacturers to the State Office of the Commission to submit an application and the necessary information; other manufacturers to the provinces, autonomous regions and municipalities directly under the Central Government Commission Office to submit an application and the necessary information, and upon receipt of the application and the necessary information, the State Commission Office to submit an application and the necessary information. Other manufacturers submit their applications and necessary information to the offices of their provinces, autonomous regions and municipalities directly under the Central Government, and forward them to the Office of the National Committee for the Prevention of Cruelty to Animals.

Manufacturers shall submit the following information when applying:

(1) "Application Form for Approval of Radio Transmitting Equipment Type" (see Annex 3) and the main technical information describing its function;

(2) "Business License of Enterprise Legal Person "copy;

(3) the equipment as a whole, front and rear panels of the clear photographs and its structural dimensions;

(4) by the Office of the State Commission for the detection of testing organizations recognized by the type of equipment within half a year of the approval of the test report;

(5) the implementation of the production license for industrial products management of the radio transmitting equipment, to submit According to industrial production license regulations to obtain a production license.

Two, the sample test before application

(a) manufacturers to provide 2 - 5 units of samples, recognized by the Office of the State Commission for testing organizations to test the approved items, and issue test reports.

(ii) If necessary, the State Office of the Commission may commission other recognized testing organizations to conduct retesting of the equipment applying for type approval.

Three, within one month from the date of application, the submission of the above application and information is incomplete and do not make up in a timely manner, it is deemed to be the initiative to withdraw the application.

Four, review and approval

From the date of receipt of complete information and formal acceptance of the application within 50 working days from the date of the Office of the State Council without review in accordance with the relevant provisions of the national radio management and national standards. After passing the review, the State Office of the Commission issued by the "radio transmitting equipment type approval certificate" and type approval code.

V. Unapproved equipment models

(a) the Office of the National Commission to notify the manufacturer and explain the reasons.

(b) six months from the date of notification, the manufacturer may reapply for approval of the model equipment. Article VII of each radio transmitting equipment model issued a unique "radio transmitting equipment type approval certificate" and approval code. If the national radio management regulations or national technical standards have been revised, or due to the use of new technologies and other reasons to change the performance of the model has been approved or the main technical parameters, the model shall be re-applied in accordance with Article VI of the "radio transmitting equipment type approval certificate" and type approval code. Article VIII of the National Office of the Commission to the community on a regular basis to publish the approved and withdrawn model of radio transmitting equipment and approval code. Article IX for the following radio transmitting equipment, may not apply for "radio transmitting equipment type approval certificate":

(a) in accordance with the "management of imported radio transmitting equipment" through the type approval, and has received "radio transmitting equipment type approval certificate "

(ii) produced for the purpose of export, not for domestic sale and use, except for agreements with relevant countries. Article X manufacturers of radio transmitting equipment type approval certificate for the "model, shall not arbitrarily reduce its approved indicators for production and sales; shall not be transferred, altered, forged or fraudulent use of the type approval certificate. Article XI of technical supervision departments on the production of radio transmitting equipment product quality supervision and inspection, the state or provinces, autonomous regions and municipalities directly under the Central Government Office of the emission characteristics of the inspection. The manufacturers should proactively cooperate. Implementation of supervision and inspection of personnel, should show supervision and inspection of documents. Article XII of the following radio transmitting equipment models, the State Office shall withdraw its "radio transmitting equipment type approval certificate" and revoke the approval code; technical supervision departments shall be based on product quality laws and regulations to impose administrative penalties:

(a) in the validity of the certificate of authorization, to receive the "Radio transmitting equipment type approval certificate" of the equipment failed sampling;

(b) product quality problems, the user response, resulting in serious consequences;

(c) approved by the name of the manufacturer, the main technical parameters, technical performance and functionality has been changed and has not re-applied for the "radio transmitting equipment type approval certificate". "radio transmitting equipment type approval certificate";

(D) the type approval certificate exceeds the validity period;

(E) factory equipment on the label is not marked with the type approval code;

(F) transfer, alteration of the type approval certificate.

Revoked "radio transmitting equipment type approval certificate" and the approval code of the equipment type, one year from the date of revocation before reapplying for approval.