How to use Omron electronic thermometer
Omron electronic thermometer can effectively measure body temperature, so how should Omron electronic thermometer be used?
Before using Omron electronic thermometer, the head of thermometer should be disinfected with alcohol. Press the switch, and the buzzer will beep immediately, which will be displayed as shown in Figure A for about 2 seconds. Then the monitor shows the temperature of the last lateral measurement, and the well lasts for about 2 seconds. When the heating rate is less than 0 within 16 seconds, and 1℃, the "℃" symbol stops flashing and the thermometer buzzes for about 5 seconds. At this time, the thermometer can read the displayed temperature value after measurement.
Omron electronic thermometer is produced by Omron Co., Ltd., a world-famous manufacturer of automation control and electronic equipment. Related products of health medical devices include electronic sphygmomanometer and electronic blood glucose meter. Compared with mercury thermometer, electronic thermometer has the advantages of safety and convenient reading. Omron electronic thermometer has memory function, which is convenient for temperature management.
Is Omron electronic thermometer accurate?
There are many kinds of thermometers, among which Omron electronic thermometer comes from electronic thermometer, so is Omron electronic thermometer accurate?
Omron electronic thermometer. When in use, it appears in digital form. Compared with traditional thermometers, the probability of finding errors is very small, usually not exceeding 0. 1 degree, so there is basically no need to worry about inaccuracy. Every use is very simple, just press the power switch, and there will be a buzzer to remind you after use, which makes the design humanized.
Omron electronic thermometer can measure only by pressing the power switch. The temperature value of Omron electronic thermometer is displayed by large screen LCD, and the value is clear at a glance. There is a buzzer prompt after the measurement is completed, so you don't have to pay attention to the time yourself. But also has a memory function, which can remember the previous measured values and facilitate the comparison of body temperature measured values.
Omron electronic thermometer price
Some people think that electronic thermometer is better, so they choose Omron electronic thermometer. What is the price of Omron electronic thermometer?
Omron electronic thermometer ranges from 200- 1000 yuan. Simple and convenient to use, Omron electronic thermometer has high technology content and memory function, which can help people draw periodic charts. Compared with traditional thermometers, Omron electronic thermometers are more accurate and can be used as daily temperature detection.
Omron electronic thermometer uses the temperature sensor to output electrical signals, directly outputs digital signals or converts current signals (analog signals) into digital signals that can be recognized by internal integrated circuits, and then displays the temperature in digital form through displays (such as liquid crystal, digital tube, LED matrix, etc.). ). Omron electronic thermometer can record and read the highest temperature measured.
How to calibrate Omron thermometer
Omron thermometers are sometimes inaccurate, so manual calibration is needed. So how to calibrate Omron thermometer?
Fill the glass with crushed ice and then add water. During the whole calibration process, ensure that the probe is completely immersed in ice water; Turn on the thermometer and set the temperature at Celsius or Fahrenheit; Insert the probe into the center of the cup to ensure that the temperature of the probe center is completely submerged and does not contact with the cup, and stir for more than 15 seconds; When the probe is completely submerged, press and hold the "CAL" button for 2 seconds until "CAL" is displayed on the LCD screen.
After "CAL" is displayed on the LCD, the thermometer will automatically: a. Start reading until a stable reading is recorded; B. Display the last three readings, with "C" displayed before the reading; C, the calibration is completed, and the normal operation state is returned. If the pointer of 1 is 0.5 degrees and the pointer of 2 is 99.5 degrees, the actual temperature of the instrument is T=t* 100/99-0.5t thermometer, and t is the actual temperature.