1, UN38.3: suitable for the scope of almost involved, belonging to the safety and performance testing, as long as it is involved in the air shipment of packaging containing lithium batteries, whether it is a very small button battery? Installed in the equipment on the battery? Or packaged with the equipment? All need to carry out UN38.3 test and obtain air transportation identification report before passing the air inspection. The certification period ranges from a few days to a month (depending on the capacity of the product and the pre-conditions of the test), and the cost of certification ranges from a few thousand to more than 10,000 RMB. Near UNDOT (UND38.3) of the official mandatory, resulting in many manufacturers are also wandering, can not find a suitable three-party testing organizations. In fact, as long as the laboratory meets the requirements of IEC17025, there are relevant UN38.3 testing equipment, strong technical guidance to back up, can be UN38.3 test and issue UN38.3 test reports; it is worth noting that: the final air transport identification report must be directly authorized by the Civil Aviation Administration of China approved by the identification of dangerous goods agencies to review the certificate, UNDOT ( UNDOT ( UND38.3 ) and other certification is that the effect of other certified reflected in the end of the sales market, UNDOT ( UND38.3 ) test effect is reflected in the transportation process.
2. Battery MSDS/SDS Many customers encountered such a problem, in the transportation of products with batteries, freight forwarders or shipping companies need to provide MSDS reports, customers who have not done the MSDS will have doubts, what is MSDS - why to apply for MSDS - how to apply for MSDS - to whom to apply for MSDS - these are troubling issues, I hope the The following content can eliminate your doubts.
How to apply for MSDS-MSDS can be prepared by manufacturers themselves in accordance with relevant rules. However, in order to report the accuracy and standardization, you can apply to the organization to prepare. Anbotek (anbotek) to provide MSDS reports, MSDS preparation, MSDS certification services, to provide lithium batteries, chemical raw materials, cosmetics and other materials MSDS report services
3, CE certification: suitable for the scope of the European Union region, divided into the safety and performance testing, the certification cycle ranging from a few days to a year, the certification fee ranging from a few thousand yuan to tens of thousands of yuan. CE certification relative to UL certification, the probability of passing (safety) is relatively high, in our view, the large number of EU member states more attractive to most manufacturers for CE certification, after all, Europe, the United States and North America, the sales price is relatively better than the domestic a lot of, but it is because of the EU's huge, so the speed of its standards update is also God Shantung surprising, so it leads to a lot of manufacturers have been in the state of confusion, it seems to be CE certification belongs to the self-declaration, if the manufacturer's own ability to test, it is entirely possible to label their products with CE compliance labeling sales in Europe, but if the EU market is sampling failed, it will be recalled (very serious fines), so many domestic manufacturers have commissioned and pure tripartite testing, to a large extent, to avoid the risk of a recall.
3, the EU Battery Directive: In 2003, Europe introduced ROHS and WEEE directives, so that each country, especially the domestic electrical appliances manufacturers are in an uproar, we run around with the understanding of the two directives between. But many people do not know, these two directives are not suitable for "batteries", batteries have the Battery Directive Battery Directive 2006/66/EC, the EU Battery Directive and ROHS is a parallel directive for different products, but many battery manufacturers firmly believe that "SGS" and "certification" and "SGS". SGS is a certification body in Europe only, ROHS directive is not suitable for batteries, so the EU Battery Directive is the correct title, we should pay attention to the "EU Battery Directive", rather than other directives. Therefore, the EU Battery Directive is the correct title, we should pay attention to the "EU Battery Directive", not other directives, otherwise it will easily lead to a lot of unnecessary trouble. Another if the product has to do with e-commerce need to note, now Amazon Germany station requires products have to do WEEE in order to be on the shelves.
4. UL certification: suitable for the scope of the North American region, mainly for the safety test, the certification cycle is usually about 2 months time (lead-acid batteries a little shorter), the certification fee is usually a few tens of thousands of yuan to hundreds of thousands of yuan ranging. The reason why UL certification, because there is a phenomenon in North America, that is, all the UL-certified products, if consumers buy the product quality problems due to adverse consequences (such as injuries to consumer rights and interests), consumers can complain about the seller, and the seller can easily get the insurance company's compensation, the reason is that the product through the UL certification, so, through the UL products in North America is very easy to sell to a large extent for this reason. The reason why UL certified products are easy to sell in North America is largely due to this reason.
5, PSE certification: suitable for the scope of the Japanese region, mainly safety and performance testing, there are two kinds of standards currently on the market, one is quoted IEC60950, the other is quoted IEC62133, the former is a standard for general information products, the latter is the battery of the international proprietary standards. The former will be gradually replaced by the latter. The former certification tour Tan cycle is shorter, two weeks time can be, the latter certification cycle is longer, it takes 1-2 months time, the cost of certification also corresponds to a few thousand yuan to tens of thousands of yuan ranging. The price difference mainly depends on the application of what form (diamond or round) PSE, with what standards. Products entering the Japanese market in the category of "Specified Electrical Appliances and Materials" are required to obtain a tripartite certification licensed by the Ministry of Economy, Trade and Industry of Japan and are marked with the diamond-shaped PSE logo, while products in the category of "Non-Specified Electrical Appliances and Materials" are required to make a self-proclaimed declaration or apply for a tripartite certification and are marked with the round-shaped PSE logo. The "Non-specified Electrical Appliances and Materials" products are required to make self-claims or apply for tripartite certification and are labeled with the PSE circular logo. Both lithium batteries can be selected, the current lithium power plant to take into account the cost of lithium batteries is selected round, unless the foreign guests require a prismatic lithium batteries.
6.KC certification: applicable to South Korea, the test standard KC62133, special attention should be paid to do the battery KC certification depends on the cell has not been done KC or CB certification, if the cell has been done CB or KC, then directly do the battery KC, the cost of 15,000 to 20,000 yuan. If the cell did not do, do the whole product, the cost is 30,000-35,000 dollars. AMB Testing is one of the three major partners of KTC in Korea, and it is the winner of KTC Golden Key Award, and there are fast cycle times available to customers. This is good news for those who have requirements for cycle time.
Lixin Testing provides you with certification services:
Asia: China CCC certification, CQC certification, Korea KC certification, Singapore PSB certification, Japan PSE certification, Japan VCCI certification, Japan TELEC certification, Taiwan BSMI certification
Europe: CE certification, ROHS certification, EUP certification, RED certification, GS certification, E-MS certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification, RED certification. GS certification, E-MARK certification; Germany TUV certification
America: U.S. FCC certification, ETL certification, UL certification, DLC certification, Canada CSA certification, Mexico NOM certification, FDA certification, Brazilian certification
Australia: C-TICK certification, SAA certification
The Middle East: Saudi Arabia SASO certification. Kuwait KUCAS certification - ICCP certification program, Iraq COC certification, Syria COC certification
Africa: Nigeria SONCAP certification, Kenya PVOC certification, Algeria COC,
International CB certification, the international IEC report
What else you do not understand can ask me directly: 13641865891Yang Gong