(1) measuring equipment, instruments, according to national regulations for regular inspection; the inspection rate of 100%; and the establishment of the corresponding management account, to avoid leakage or expiration of the use of inspection. (2) Configuration of measuring instruments and meters should be selected from the national measurement company or legal unit of measurement of the product, and by the calibration of qualified before use, where no measurement of the certificate of conformity of the product is not allowed to purchase and use. (3) measuring instruments seal should be kept intact, in use or preservation, should pay attention to dust, moisture, corrosion, prevent sun and rain. (4) regular verification of measuring instruments, instruments and meters in the use of error over the provisions should be promptly rechecked, in addition to the statutory inspection agency, no one has the right to dismantle the measuring equipment seals. (5) pressure gauge calibration every six months at least once. (6) The company should implement measuring instruments and instruments such as custodianship, maintenance and use. (7) No one shall not dismantle the measurement equipment. (8) measurement equipment is one of the following circumstances, shall not be used. ① not in accordance with the provisions of the periodic calibration. ② After the cycle of unqualified verification. ③ has exceeded the verification cycle. (4) No certificate of conformity or seal of conformity. (9) measuring equipment, such as spare parts and accessories must maintain the integrity of the set of equipment is prohibited scattered or disassembled use. (10) belongs to the unreasonable use or abnormal damage to the measurement of equipment, to identify the causes, clear responsibility, and develop preventive measures.
More about the engineering/service/procurement category of the tender writing production, to enhance the winning rate, you can click on the bottom of the official website customer service free consultation:/#/?source=bdzd