One, fog spray nozzle buying tips
1, consumers should understand the core technology of spray equipment is the nozzle, foreign landscape-level nozzles and industrial-level nozzles, into the fog effect is different, the price difference is also very large, the user should be based on their own needs to choose. Divided into landscape-level nozzle and industrial-level nozzle is the main basis for the size of the nozzle spray caliber level.
2, spray equipment for water quality requirements are very high, the water treatment device is a detail that can not be ignored. Natural water sources contain impurities to varying degrees, and even some harmful substances, if handled poorly, not only affect the normal operation of the equipment, but also harmful to the human body.
3, is to check the degree of automation of the control device. Advanced control device not only can be commanded in a pre-set program to achieve the system to start the automatic switching, fog-shaped automatic combination of functions, but also put into operation of the state of the equipment to monitor the computer automatically control the process start, stop and according to the equipment failure signal alarm, automatic troubleshooting, thus reducing manual operation and maintenance.
Two, air atomization nozzle working principle
Air atomization nozzle and mechanical injector nozzle working principle is not the same, it is the use of compressed air dispersion effect to make the tender material atomization. Therefore, it can avoid the shortcomings of those mechanical nozzles inherent in the low oil pressure when the atomization is poor and the oil address adjustment is limited by the oil supply pressure. In this type of nozzle, most of the pressure-knit air is sprayed to the Gushu burning space through the air flow channel 1 at a speed of about 300 m/, entraining the tender material supplied by the spinning chamber, while the other part of the air enters into the inner cavity after the spinning chamber of the nozzle. Mixed with the tender material shot out of the nozzle. This inside and outside the two layers of air entrainment scheme can ensure that the tender material is well atomized.
Three, the air atomization nozzle model
In fact, we can often see the air atomization nozzle, then we know how much the air atomization nozzle model? Followed by the editor to see it. In fact, the air atomizing nozzle model is still very much, such as our common hollow cone nozzle, atomizing nozzle, fan nozzle, paper nozzle, oil pump nozzle, fire nozzle, dust nozzle, as well as special nozzles these are air atomizing nozzle model, many models, mainly depends on the use of the.
Four, the price of air atomizing nozzles
Shanghai Mistai atomizing nozzle market price of more than 200 yuan, Yang Xinliyuan narrow angle fan nozzle market price of more than 88 yuan. In fact, there are many models of air atomizing nozzles, relatively speaking, the price is different, mainly depends on where to use, as well as their own economic conditions, so I hope that the price mentioned above can be used for everyone to do a reference, in the purchase of the time can be a reference opinion.
When we choose any product or to have a certain understanding of how it works. The above is what I introduced today for you to buy tips for atomized sprinklers and its working principle to the end here.