? Time flies like a shuttle, after a year of work, the content of their work has a lot of new insights and understanding. Write a good post annual work report, is considered to the past year to hand over a satisfactory work answer sheet, we are able to use the opportunity to write a work summary to see their own growth, in the post of the annual summary, we need to focus on what aspects of the statement? Urgent your urgent, I have collected for friends and I have "Project Engineer annual summary of work model (selected 10)", welcome to read, I hope to help you.
Project engineers annual work summary essay a? The sun and the moon like a shuttle, time like a meteor fleeting. Step into the design institute engaged in design work has been more than a year. In this more than a year of work, I have experienced, just set foot on the workplace of the kind of freshness; but also feel the designer's hard work and labor. In the first half of the year, I try to adapt to the new working environment; in the second half of the year, my work focus is to cultivate their own good learning habits and serious and practical attitude to learn, for the first time Assistant Engineer and make unremitting efforts.
? As a "double new" designers, both new to work, but also coincided with the recent reform of the hospital, just out of school and into the design institute, although the environment has changed greatly, but still learning-oriented. In this short year, I am both excited and thrilled. Under the enthusiastic support and help of the leaders and old bosses, I seriously do a good job of design work, and actively complete the tasks assigned by the Institute. I have a lot of thinking and feeling about their own business and design work, is now more than a year's work to do a brief report:
? First, political thinking
? In this more than a year of design work, I y appreciate the engineer's work is trivial and heavy, from the design program to the completion and acceptance, each link can not slack. In the design process, I keep learning and reflecting, making progress in learning and growing in reflecting, so that I can become a good engineer someday in the future. Design purpose is clear, attitude is correct, study the business, diligent and hardworking. Passionate about their own careers, solidarity with colleagues, open-mindedness to seek advice, and abide by labor discipline. Participated in the xxx donation activities to enhance the collectivist spirit of the whole hospital staff. Strengthen the cultivation and improvement of their own quality, starting from themselves. The specificity of the profession of engineers determines the inevitability of our people-oriented, safety first.
? Second, the business ability
? Between jobs, through the talk and communication with several old engineers, in a relatively short period of time on the architectural design and structural design has a preliminary understanding, secondly, under the leadership of the old general manager, we learn the new version of the 20xx specification, but also to us for the guidance of the design methodology and psychological counseling on safety awareness, for some of the fresh graduates due to the design of only accessory type of building and the inferiority complex, worry, The psychological guidance for some fresh graduates who can only design subsidiary buildings, such as low self-esteem, worry, disappointment and other psychological guidance to stimulate our self-confidence, cultivate our enthusiasm for design and initiative.
? Let me feel y: the director inspired my sense of ownership, and gradually cultivated my ability to boldly take responsibility for the project, so that we, a group of fresh graduates enhance the sense of responsibility for the work of the Institute and take the initiative to participate in the management of the awareness of the formation of a unity, willingness to work, the work of a responsible design team, led to the members of the Institute of the **** with the progress. In addition, the director also taught us, in the process of negotiation with the A party to "words must be done, action must be fruitful", people-oriented, integrity first.
? In 20xx the new version of the norms under the tide of reform, I and all the engineers together into the new version of the norms of the wave of learning. Since the implementation of the new specification, the old masters in the process of reviewing the drawings, and actively cultivate our ability to independent learning, the spirit of scientific inquiry, no longer will be the design specification to fill in the duck type of teaching to us, but to let us through the way of independent inquiry to raise the issue, analyze the problem, find out the problem, solve the problem, draw conclusions, verify the conclusion, apply the conclusion to solve the problem. Focusing on process cultivation and summarizing key points in reviewing drawings has improved our interest in learning and cultivated our creative spirit. Design seriously and seek advice with an open mind. As a young designer, in order to improve their own design level, I insist on often looking at architectural specifications atlas, often from the Internet to find some excellent architectural design drawings to study. Usually, I seriously and humbly consult experienced bosses to learn from their experience and the kind of serious and responsible attitude towards the project, and constantly improve my own design level and comprehend the design art. Lu Xun said: "There are a thousand Hamlets in a thousand readers." I have to say, a thousand designers, there will be a thousand design styles, each style, has its unique and charismatic glittering side, and I would like to be a hard-working bee, can learn from the best, and strive to design excellent works!
? Third, the work performance
? In xx city xxx architectural design institute works:
? xx city inspectorate facade renovation program, xx and xx road facade renovation program, xx city xx limited company office building program, xx city armed police city detachment second squadron facade renovation program, xx program, xx city xx hospital medical office building building building structure, xx city xx building structure, xx city xx limited company main gate gatehouse building structure, xx city xx company office building building, xx city xx limited company power distribution room building structure, xx city highway hotel elevator renovation building structure, xx program, xx garage building, xx program, xx city funeral home gate pagoda building structure, xx city xx building, xx city xx village relocation of residents of the community private housing program, xxx program ......
? Works in xx city second architectural design institute:
? xx Management Committee Guangde Temple two bridges (vehicular bridge, pedestrian bridge) building structure, xx City Children's Welfare Institute planning program (revised part), xx City First People's Hospital old inpatient surgical building renovation program (structural reinforcement of the construction drawings, water pump room building structure), xxx Industrial Park (cleaning and polishing workshop, materials warehouse, finished goods warehouse, casting workshop) building construction drawings and the gate enclosure attached to the building structure, xxx Residential area planning program, xxx Electric Group Limited office building program (modified part), xxx Welfare Institute (xx building, office building, teaching building, infant dormitory, children's dormitory) structural construction drawings, xx City Light Industry Association staff building structure, xx City xxx building structure, xx City xxx building structure, xx City, Xinsheng Street residential and commercial building building building program part, xx College xxx Hotel gate architecture Structure, xx city xxx building program part, xx city xxx company business building construction program part ......
? This year in the leadership and colleagues of the attentive care and guidance, through my own learning and study, the theoretical knowledge learned from books against the actual work, with theoretical knowledge to deepen the understanding of the actual work, with the actual validation of the theoretical knowledge learned, and strive to quickly accumulate design experience, so that they faster and better into the work.
? Fourth, the direction of future efforts
? ①Improve their own design level, listen more, think more, do more, communicate more, keep up the good work.
? ② often learn from the old engineers, can learn more knowledge in the master, to be able to stand alone;
? ③ often look at the specification atlas, in practice, constantly enrich their experience and skills.
? ④Improve your design quality and professional ethics.
? ⑤ Actively work hard to prepare for the examination: registered structural engineers, second level registered construction engineers, first level construction engineers, registered cost engineers, registered supervision engineers, focusing on the first three.
? In the future, I will further strengthen technical learning, work solidly, give full play to my personal strengths, and make more contributions to the institution. Design experience is a little by little accumulation. Progress a little bit every day, is a process of continuous improvement. There is no best, only better. If you want to go faster, you must step forward and make continuous improvement.
? Design work, is a always new, never-ending work. A spring, an autumn, let me put a design desire into a fire for the cause of the building, the most precious love of their own dedication to the structural design of the building, I believe that today I have a bud in my heart, tomorrow will be able to bloom gorgeous flowers.
? This year, is my rapid growth with sweat in exchange for a year of fulfillment. But this is just a beginning, "the road is long, I will be up and down to seek".
Project engineers annual work summary essay two? First, the main work of the year and the completion of the situation
? According to the company's work arrangements, I have mainly completed this year, Longkaikou power station delivery, ** security converter station expansion, ** substation expansion, ** converter station ground melting ice and other engineering supervision. Under the correct leadership of the company's leaders at all levels, and with the active cooperation of all departments, I led my team to safely, high-quality, efficiently complete the supervision tasks of the year, and the achievements have been recognized by the construction unit as well as the company's leadership.
? Second, the work of the highlights and shortcomings
? Summarized in the work of the experience of the main leadership of the following points to report: First, all the design documents, national electric power construction regulations and norms, construction contracts and supervision contracts as the basis for doing a good job of the two management, four control and a coordination work. Secondly, we should learn from our colleagues with rich experience, study hard, think hard and work hard. Third, unite your team and build a harmonious team. Fourth, boldly explore new technologies and techniques, and optimize the construction plan. Fifthly, we will go through all the rules and regulations of the Southern Power Grid and the company, actively promote the application of the requirements of integrated management of infrastructure projects, and carry out quality control in accordance with the established WHS points. Seven is on their own team requirements standardized to do a good job of supervision diary and other work to strengthen the management of engineering image data.
? Among them, I think the unity of their own team, to build a harmonious team is most important, as the saying goes: all rowing oars to open a big boat, a fence three piles are illustrated the team's strong power, several years of experience and practice has proved that: only by relying on the collective wisdom in order to overcome all the difficulties until the end of the victory, in order to show the company's image to the outside world. Strong Internet information technology in the role of engineering. Sixth, actively through
? Third, the problems encountered in the work and handling
? In the work, but also often encountered some problems and troubles, but I never avoid, first of all, calm thinking, from which to realize the ideas and methods of solving the problem, for thorny problems or play the wisdom of the masses. Brainstorming and adopting the wisdom of the masses. For some in their own capacity and competence within the scope of the problem really can not be solved, timely report to the relevant leaders for instructions, to avoid making difficult and contradictions deteriorate, and strive to solve the problem of time. So over the past year, I am leading the team, can successfully complete the company accounted for the various tasks. Also thank you again for the care and support of the company's leaders and colleagues, without the care and support of you guys is unimaginable.
? Fourth, the company's views and suggestions
? I hope that our company is like the rising sun in the morning, vibrant and dynamic. Of course, I also hope that our lives are full of sunshine. In view of this, I suggest that the company: First, it should actively expand its business, cut costs, improve efficiency and optimize the structure of human resources. Second, increase the cost of staff education, training a number of high-quality supervisory personnel, to take some incentive policies to encourage advanced, spurring the latter. Create a positive learning atmosphere. Third, wage reform, good performance, good expertise, love and dedication and other outstanding employees to improve treatment.
? Construction and installation engineers personal work summary supervision engineers year-end work summary supervision unit superintendent of science engineers responsibility letter
Project engineers annual work summary sample article three? Respected company leaders:
? Hello!
? I am xx, I joined xx engineering management consulting limited company on June 21, 20xx, as a consulting engineer, three months, I actively learn the company culture and system, quickly into the company collective and departmental groups, with the department manager as well as other colleagues, to complete the work. Now the three months since the work of the results of the summary, outlook and planning to report to the leadership.
? A summary of work results
? Three months since entering the company, I a **** to receive seven projects, of which six are review projects, one for the re-measurement of the project.
? Review projects were xx.
? Second, the work plan
?1, to complete the previous unfinished projects, according to the previous project of their own problems, and actively improve, improve the efficiency of the work;
?2, to complete more accomplishments, and to coordinate and communicate with the various projects.
? Third, the work outlook
? To become a good costing practitioner as the goal.
?1, actively study related professional knowledge with excellent professional quality;
?2, try to get a first-class cost engineer;
?3, with excellent team spirit and communication and coordination skills;
?4, actively study the company system and culture, with a strong sense of responsibility and sense of mission.
? The above is a summary of my work and the planning of my career path.
? I urge the leadership to criticize and guide.
Project Engineer annual work summary essay four
? Measurement is the eyes of the project, as a surveyor, we in line with the actual truth, all data to speak of the principle of surveying work. xxxx year in Si Si highway surveying work, summed up some of the experience and lessons learned, in order to facilitate the next year to better carry out the work.
? Before the measurement, should be familiar with the drawings, the preparation of the measurement program, for specific structures and road routes to compile a set of measurement procedures, in order to facilitate the measurement work.
? The main content of the whole line of measurement
?1, the whole line of the conductor level points of the regular re-testing and encryption, and neighboring segments of the conductor points of the joint measurement, and so on.
?2, roadbed: excavation (no fill in this project) mainly monitor the width of the excavation opening line, excavation slope, the width and elevation of the excavation platform, the location of the center pile of the roadbed after molding, width and elevation.
?3, bridge: bridge pile foundation is mainly the center position, pile base bottom elevation, construction process of the hole diameter check, pouring surface elevation control; abutments, platforms, bearing platforms, tie beams, thin-walled piers is mainly the mold before the measurement of the sampling and review, the position of the various embedded parts of the sampling and review, the bottom of the template elevation, the template geometry, the top of the concrete poured surface elevation control, as well as molding the axial deviation detection, etc.; the tie beams are also the main axial deviation detection, etc.; the system is the main axial deviation detection. Axis deviation detection, etc.; axis of tie beam, elevation of the bottom of the formwork, geometric dimension of the formwork, control of the elevation of the top of the pouring surface, and axial deviation detection after molding, etc.; column: mainly sampling and checking of the center point, elevation before molding, verticality of the formwork of the column, control of the elevation of the surface of the pouring surface of the concrete, and measurement of the center deviation after molding, etc.; cover beam: mainly the geometric dimension of the formwork, elevation of the bottom plate, elevation and slope of the surface of the pouring surface, and measurement of the center deviation after molding. The cover beam is mainly the geometry of the mold, the elevation of the bottom plate, the elevation of the pouring surface and the cross slope, the position of the pre-buried reinforcement and the axial deviation measurement after molding, etc.; the axial sampling and checking of the bearing pad stone, the control of the elevation of the top surface of the pouring and the checking of the template geometry and direction.
?4, timely communication and coordination with the monitoring unit to grasp the roadbed, tunnel and later hanging blue bridge block deformation, listening to the monitoring unit's guiding opinions and suggestions, found that the problem is handled in a timely manner, for the construction of the site to provide accurate construction basis.
? Conductor point, leveling point handover
? Construction sampling is carried out according to the design drawings after the construction contract comes into effect, before construction sampling, the surveyor should be fully familiar with the design documents and supervisory rules, accepting the supervising engineer or design unit to hand over the guide line piles, level points with the design institute pile-by-pile coordinate information and other pile records. Under the auspices of the supervising engineer, the design unit will hand over the piles directly to the contractor at the site according to the drawing information. If more than two consecutive control pile points are found to be lost or damaged, the design unit shall be required to make up for them. After receiving the piling plan and coordinates, elevation and other data issued by the design unit and handing over the piles on site, the Contractor shall carry out the review and testing within the specified period (generally 14 days) by himself, and shall carry out the side station supervision during the testing process. If there is no error and the accuracy meets the requirements of design and construction, it should indicate in writing that it formally accepts the staking and is responsible for the maintenance and use in the future. If the Contractor disagrees with any of the measurement marks and data, the Supervising Engineer shall submit a form listing the locations of the stakes that are considered to be in error and the corrected data. The Contractor's review test results shall be submitted to the Supervising Engineer for review and shall not be used as control points until confirmed by the Supervising Engineer.
? The handing over of piles is a very important work, which should be carried out to avoid any errors that may cause to the project. Surveyors should review the new pile points in a timely manner, and use the method of attaching guide lines to jointly measure two points with neighboring segments to see if they meet the technical requirements related to secondary guide lines. The guide line point often can not meet the needs of measurement, far from the center line of the road and more obstacles, so it is necessary to set up additional support guide points, in the selection of points, follow the following principles:
? Guide point should be selected in the higher terrain, open view of the location, easy to measure the surrounding terrain. Two neighboring points are visible to each other, easy to measure.
? The guide line point is set in a flat, solid soil, not easy to destroy the ground set. Easy to set up the instrument. The side lengths of the wire should be roughly equal, and the neighboring side lengths should not be too large a difference.
? Measurement of conductor points
? After the new point is selected, mark it well on the ground, for the wire point that needs to be preserved for a long time, it should be buried in stone or concrete stakes, carve a cross as a sign, and measure the angular distance and elevation difference of the point through the two known points, and close it to another wire point. Utilizing the measurement method of positive and negative mirrors, calculate the level difference, and then determine the coordinates of the point, and make a good record of the results. To ensure the correctness of the control stakes and point information handed over. Encryption of control network points
? Design unit submitted by the wire point, leveling point is the design stage to meet the design requirements for the establishment, and can not fully guarantee the needs of the construction site measurement of the sample, and some of these piles and points in the construction process will be covered, destroyed and disappeared. Therefore, before the start of construction, the surveyor carries out the work of encrypting the control network points to ensure that the route and all parts of the structure can be accurately positioned and the construction process of individual piles can be lost after the loss of sufficient accuracy to restore the pile position. After the surveyors formally accept the wire point and level point, they should immediately carry out the encryption work of the construction measurement control network according to the site conditions and the requirements of the construction technical specifications. Buried piles, measurement, network construction and calculation of encrypted control network points shall be completed independently by the surveyor. Personnel to complete this work should have qualified qualifications and work experience, the use of instruments must be tested and calibrated to meet the accuracy requirements. Draw up the plan for measuring and setting up the encrypted control network points. After the surveyor completes the encrypted control network work, he should submit the report and calculation information to the supervising engineer in writing. Supervisory engineer review test results for audit, that is accurate, precision meets the requirements, can be used.
? Construction sampling review
? The surveyor should set the position and elevation of highway lines and structures correctly on the ground according to the design requirements. In order to prevent errors in construction sampling measurement and bring losses to the project, the construction measurement control network has been perfected and approved by the supervising engineer, you can start to do the construction sampling work of specific sub-projects. Before the start of measurement and sampling, the surveyor should submit a measurement and sampling plan program, and the supervisory personnel should stand by during the process of measurement and sampling in order to ensure that the construction sampling method and the measurement and reading are error-free. The report form and original records of the sampling measurement should be submitted to the supervising engineer for review and signing before the start of construction. First of all, the preparation of the measurement program, in the construction of the measurement process should be implemented in accordance with the approved program, and first self-checking, mutual checking, qualified and then ask our supervisors to review.
? In the new year, in the support of the owner and the cooperation of the construction unit, we will redouble our efforts to seriously do a good job in supervision services. We are confident that we will also be able to successfully complete the supervision task of measurement, and make due contribution to the construction of Si Si highway.
Project Engineer annual work summary essay five? I have been in many years of construction technology on-site practice, so that I have made great progress in political, ideological and business level, technology has also been improved, the construction of the project in the quality of the project are guaranteed, I continue to learn to gradually improve, and now will be summarized as follows:
? First, a wealth of specialized knowledge is engaged in the premise of professional and technical work
? Since I joined the work, the work of the Bureau, the leadership of the guidance and concern, has been engaged in highway surveying, highway design, budget-related professional work. In a few years of work practice learning, so that I have accumulated a certain amount of professional theoretical knowledge. I have engaged in highway bridges, highway tunnels on-site construction projects are:
?1, 20xx.5-20xx.7 sea-sleeve railroad Fenling Mountain Highway construction, the total length of 4560 meters, bridge: 162.38m, the total cost of the project is 125.71 million yuan when the technician, engaged in the construction management work of the project on schedule for the successful completion of the project successfully through the completion of the acceptance of the quality of the project is qualified;
?2, 20xx.12-20xx.10, Sichuan Province, Jianyang City, Sanchohu Tourism Fast Track A section, tunnel: high stone ladder around the line of 436m, Dajingshan around the line of 4770m, the roadbed excavation of 1.37 million cubic meters of earth and rock, filling 930,000 cubic meters, bridges: 3024m, culverts 581m, the cost of 48,151,000 yuan when the technician, under the guidance of the engineer is responsible for on-site construction management, monitoring and control of the project, the total project cost of 125.71 million yuan. As a technician, under the guidance of the engineer, he was responsible for the management of on-site construction, monitoring the progress and quality of the site, and was responsible for the daily safety management. The project was successfully completed on schedule, successfully passed the completion inspection and acceptance, the project quality is qualified;
?3, 20xx.10-present Chongqing Metro Line 6, Phase II Causeway Hill, inclined shaft 367.66m, interval tunnel left and right line 2634.3m, cost: 72.257 million yuan as a technician, under the guidance of engineers responsible for the management of the site construction, monitoring the site progress, quality and completion of the situation. Completion. The project is now under normal construction. Have done a good job of planning, rationalization of all processes and production factors. Prepare in advance the manpower, materials and equipment, technical preparation, external relations, etc. required for the subsequent work. Ensure that when the subsequent work is implemented, there is no confusion, no lack of things, and no impact on the schedule. In the work, personal attitude is also very important, the leadership of the task must be completed according to the requirements, can not drag perfunctory. If you encounter special circumstances can not be completed on time to report. Convenient to solve the problem as soon as possible. The work of the technical staff is also relatively hard, during the day to climb up and down the site to guide the construction, and at night to the day's inside information to organize and arrange for the next day's work. This requires a hard-working spirit, the day's work is completed on the same day, never delayed until the next day. Technicians are working in the front line of construction, and are responsible for the quality, safety and progress of the construction process. Timely report the problems that need to be solved and improved in the construction, and propose solutions to the leaders. In the work to deal with the relationship with the construction staff and supervision of the owners, all to ensure progress and quality and safety as a prerequisite. In the construction process of the formation of a variety of inside information and quantity confirmation information to find the supervisory engineer to sign in a timely manner, so as not to affect the later measurement.
? Second, strict standards, strict requirements, and strive to professional and technical work to a new level.
? Since I engaged in the technician, I strictly request myself, combined with theoretical knowledge applied to highway construction construction, achieved a certain practice. Strictly in accordance with the "technical standards for highway engineering" and "engineering quality inspection and assessment standards" for construction, as a qualified technical responsible person, I am strictly engineering quality, good leadership assistant, technically dare to innovate, the courage to explore, to summarize the practical experience, in a few years of tenure, very well fulfilled the duties of the technician, I have done a lot of work for the community for the cause of highway in recent years. In order to professional and technical level and professional and technical work capacity to adapt to the development of the highway cause, but also need to continue to work hard to learn professional and technical knowledge, and constantly sum up the experience, and constantly enrich the level of self-professional theory and practice of construction capacity, professional and technical position to a new level, for the development of highway construction to do their duty accidents. Take the most timely and effective measures to deal with safety accidents. And do a good job of finding the cause after the incident, tracking down the responsibility, as well as summarize the lessons learned to educate the staff with examples, in order to improve the concept of safety awareness.
? In the construction technology seminar, serious, hard to explore, for the combination of the new Austrian method of construction continue to explore, in the technical attack on the good results, providing a considerable part of the books can not get valuable experience, for the Luo long highway canning tunnel and the sea sleeve railroad watershed tunnel to provide a useful construction experience in the most complex geological conditions in the tunnel smoothly through the creation of technical conditions, for the company to win a good The company has won a good reputation.
? In many years of construction management, summed up the project management experience, construction management, financial management, materials and logistics management summed up a wealth of experience, to become a qualified management leadership and technical backbone.
? According to the tunnel using the new Austrian method of construction excavation and surface blasting requirements, by specialized technical personnel on the design of drilling and blasting, on-site guidance to the construction staff according to the design of the eye direction, excavation to ensure the quality of the measurement, strict control of each construction process, strictly in accordance with the requirements of the construction specifications for the commissioning of the project without worries, to create a high-quality projects. Summarized from the practice of profound experience is "today's quality is tomorrow's market", I am in the construction of high-quality model projects as the starting point for the goal to establish a sound quality management network, good drawings full review off; good construction technology, according to the construction of a good and reasonable construction schedule, high speed, quality, no major safety accidents! Completion of each project
? Third, in the construction practice to improve technology
? Participate in the work of more than twenty years, in practice, and constantly improve their technical level and construction technology management capabilities, so that they have learned the textbooks do not have the new technology and new techniques to improve the ability to undertake, organize, coordinate the construction of tunnels, roadbed project production, technical management, familiar with the design drawings, and according to the design drawings and the relevant provisions of the regulations, norms, procedures and construction organization and design of construction organization, and resolve Problems with difficult technology; preparation of construction organization, construction plan, handling and planning with the ability of large collapse events. More importantly, how to control the project in the quality and safety procedures and management, so that after the production of the project has a long-lasting quality assurance. Finally, the construction performance review in the process of construction for many years, I am a goal as a principle from the grasp of quality, safety, progress and engineering efficiency for the purpose of ensuring the quality of the project. In the highway and tunnel project, because the geographical location are more remote, the environment is more harsh, there will always be some common construction problems, such as: cave perimeter rock is weak, complex terrain changes, more broken caused by a large area of roof collapse, to the construction of the impact caused by a great deal of hard work day and night by my team and according to my team to provide treatment of landslides of the program for the rigorous and scientific rescue, the smooth completion of the task and by the construction sector This project was awarded by the construction department, and the final acceptance of the project was evaluated as excellent. This shows that the construction is not only the amount of "dry" but also scientific knowledge and theory and rich practical experience in order to put the project.
Project Engineer Annual Summary of the work of the six? Civil engineering project engineer annual work summary sample is a civil engineer work an assessment, from the report summary can be seen in this period of time civil engineer work status, as well as performance. Here is a piece of civil construction project engineer annual work summary sample, from which we can learn a lot of knowledge, we can also learn from his work, develop a set of ways and means suitable for their own work, only to better improve their own ability to work.
? My civil engineering project engineer annual work summary sample is like this. Whether as an ordinary engineers and technicians, or as a technical person in charge of a project, I feel that in order to do a good job of a project, not only to strictly comply with the national construction norms and regulations, but also to link theory to practice, live and learn, and constantly summarize the construction and management experience, technical improvement and innovation.
? I work in the work, contact with many chimneys, experience only technical innovation, equipment updated, in order to create greater economic and social benefits.