UV curing machine uses are;
UV curing machine is divided into large equipment and small, portable water-cooled UV curing machine. Available in the production of electronic products curing, furniture surface varnish, leather leather goods surface varnish treatment, paint coating curing operations, all types of glue curing, ink light source curing, printing curing, packaging curing and so on all useful to glue, ink, paint operations are available to the uv curing machine, especially portable uv curing machine. Physical please see the picture below;
The main purpose of the UV curing machine: UV pad printing process in the UV pad printing ink drying treatment, UV ink manufacturing plant ink can test link. Work on the table, suitable for small product curing, suitable for testing and proofing with.
The principle of UV light curing machine: in the specially formulated resin add initiator (or photosensitizer) after absorbing ultraviolet light curing equipment in the high temperature of ultraviolet light, the production of life radical or ionic radicals, thereby triggering polymerization, crosslinking and grafting reactions, so that the resin (UV coatings, inks, adhesives, etc. in a few seconds (varying) from the liquid state into a solid state. Applicable to all kinds of pvc, plastic sheet, computer keyboard, cell phone keypad, etc..
UV light curing machine can also be used for UV spraying, printing after the ink layer curing. It is currently more environmentally friendly way of ink drying. It can be in the instantaneous high-voltage excitation so that the UV lamp lights up the main peak of 360nm or so of ultraviolet light, irradiation of the ink layer triggered by the ink of the acrylic resin crosslinking curing.
UV curing machine with uv spraying, curing of the ink layer after printing. It is currently more environmentally friendly ink drying method. It can be in the instantaneous high voltage under the excitation of the uv lamp light up to send out the main peak of 360nm or so of ultraviolet light, irradiation of the ink layer triggered by the ink of the acrylic resin crosslinking curing. uv pad printing process in the uv pad printing ink drying process, uv ink manufacturing plant ink can be tested link. Bench top work, suitable for small product curing, suitable for testing and sampling with.
UV curing machine as a new curing program, there are a variety of options will no longer be like the traditional curing machine, there is a big material, and small talent is not enough to use the big, in layman's terms that is to say, was just a small item, but because of the traditional curing machine to choose less can only buy a large, not only spend a lot of money and also occupies a place, to the industry with the unchanged, on the contrary, a large item needs to be hardened, but On the other hand, a large item needs to be hardened, but because the traditional curing machine is not big enough, it can only be carried out several times for one item. Time-consuming and laborious.
UV curing technology began to reflect one of the main advantages of UV curing system is the initial capital investment is less, compared with the investment in hot air drying equipment, UV curing system in the investment in equipment can save 80% of the money. uv light curing machine other advantages are to increase productivity, improve the quality of prints, so that prints diversified. In addition, the most prominent advantages belong to the UV light curing will not emit VOCs in the print shop and the surrounding environment, and the maintenance and operation of the UV light curing system is simple. uv light curing system belongs to the advanced technology, and at the beginning of the use of the UV light curing system may feel that the maintenance and control of the UV light curing system is a little complicated. In reality, however, the operation and maintenance of a UV curing system is simple, downtime is optimized to a minimum, and UV light curing systems are easy to maintain and simple to operate. The key to maintaining a well-maintained UV system is to develop a preventive maintenance program and follow that program to maintain the UV light curing system.