Open the case cover with a fan blowing against the very good way not only to reduce the temperature of the CPU, but the temperature of the whole machine. It's a good idea to cover your computer when it's not in use to prevent dust. Don't clean it up every now and then. It's not good to loosen the ports inside.
(The most important thing is to make sure that there is no moisture inside)
Comprehensive cleaning of the computer mainframe
Related tools: Phillips screwdriver, special vacuum cleaner, special wipes (or paper towels), dust cleaner brush, high-pressure air canisters, special cleaner, 3.5-inch cleaning disks and cleaning fluid, cleaning CD-ROMs and special cleaning fluid. special cleaning solution.
"If you want to do a good job, you have to make good use of your tools", so prepare your "tools" first!
Disassembling the chassis panel
1 Before disassembling the chassis panel, be careful to unplug all the power supply and wiring to avoid electric shock or damage to the device by pulling the wires. Please remove the screws behind the left side panel with a Phillips screwdriver. Generally speaking, the motherboard will be installed on the right side of the mainframe (based on the front of the mainframe), so you only need to remove the left side panel.
2 When cleaning the motherboard, be careful not to spray any liquid directly onto the motherboard. We can use a "high-pressure air spray can" or a small vacuum cleaner to clean up any dust or hair.
Direct spraying of cleaning agents is strictly prohibited.
Use the compressed air jet tool to clean the dust on the motherboard.
3 For the empty slots, do not use a lint-free cloth to wipe them down, but use a dedicated vacuum cleaner to clean them up a bit.
4 Use a high-pressure air nozzle or other lint-free paper towel to carefully clean the fan bearings and fan blades.
Note: Many high-performance graphics cards have cooling fans, so remember to clean them as well!
5 After the small fans are cleaned up, it's time to clean up the big ones, the ones that cool the power supply. Because the power supply is a closed box-type objects, so we only on the front and back of the cooling hole can be cleaned. With air cans, special brushes or wipes, the accumulation of hair on the cooling holes, dust and dirt one by one to remove, to maintain air circulation.
6 OK! Host internal cleanup probably come to an end, the host side cover mounted, and then spray some cleaning fluid, with a hairless cloth or paper towel to wipe the body surface dirt.
7 How to clean inside the optical disk drive? Never take a cotton swab and force it deep to wipe the head, if you do so, the CD-ROM drive will surely be reimbursed, you should utilize the CD-ROM for cleaning.
Tip: The CD-ROM will play on its own (or manually) for about 15 seconds.
8 Have had experience with unreadable disks, right? Except for a few reasons that the machine picks the disk, most of them are caused by not cleaning the floppy disk drive head regularly.
1 Apply about 2 to 4 drops of the special cleaning solution to the clean disk.
2 Place the cleaning disk in the floppy drive for about 15 seconds.
Note: Don't think the more drops of cleaning solution the better, the more drops you put on the disk, the more counterproductive it may be!
Let the screen back to the bright style
Related tools: special vacuum cleaner, screen special wipe, dust cleaner, high-pressure air canister
Carefully observe to see, you stare at every day to see the screen, is not long lost the old style, become dull a lot? In fact, just two simple steps can improve this situation! For the sake of your eyesight, but also for the sake of beauty, come to take care of the shoulders of the heavy responsibility of the monitor, but also the original appearance of it in the past it!
1Use a special wipe for the screen to wipe the surface. The wiping action can not be too rough, as long as carefully and gently rubbed over, you can achieve the cleaning effect.
2 Use a dedicated vacuum cleaner to gently sweep the back of the screen through the cooling holes to clear the dust.
LCD cleaning
LCDs can be cleaned in the same way as traditional screens, by using a special wipe to clean the screen part. Alternatively, you can use a high-pressure air spray can to remove dust from the LCD cooling holes to make the LCD last longer.
Restore your keyboard's whiteness
Related tools: dedicated vacuum cleaner, high-pressure air canister, cotton swabs, hand-operated air compressor
After a while of using your keyboard, it will inevitably get a bit dusty or slightly discolored. This is especially true if you've been eating and typing at the same time, which can lead to food crumbs in the crevices of your keyboard, which can lead to poor contact with the keyboard in the long run. The keyboard is one of the closest companions of your hands in computer operation, so don't forget to clean it regularly to make it work for you longer.
1Use a dedicated vacuum cleaner to clean the surface of the keyboard.
2Use a cotton swab to clear larger crevices and brush away slightly sticky hairs and dust in the process. If there's some sticky dust on the keyboard, you can also step up the cleaning with the cleaning solution mentioned earlier, just dab and wipe with a cotton swab.
3Use a high-pressure air spray can or a hand-operated air compressor to remove dirt from the keyboard's fine crevices.
Baby your mouse
Related tools: Cleaning solution, wipes, high-pressure air canister, lint-free cotton swab
If your scroll wheel mouse is becoming more and more unresponsive, in addition to the problem with the mouse itself, it's probably because it's covered in too much dust, which is why it's struggling to get in and out and not moving well. The following demonstration will take a wheel mouse as an example. If it is an optical mouse, you don't need to disassemble it to clean it, just wipe the part of the luminous body.
1 Unscrew the protective cover on the bottom of the mouse and remove the scroll ball inside.
2Wipe the ball with a special cloth to remove any dust from the surface.
3Use a high-pressure air spray can to clean out the dust inside the mouse, so as not to affect the action of the rolling ball.
4The part of the rolling ball groove needs special cleaning, use a cotton swab to wipe it carefully and clean the rolling ball part.
Make the joystick no longer out of control
Related tools: Wiping cloth, high-pressure air spray can
1 Use a magic cloth (dry cloth is also acceptable) to wipe the joystick grip and shaft. Do not use a wet cloth, so that the water does not run into the "show".
2 Use the air spray can to remove the dust from the buttons and grips of the joystick, which can reduce the situation that the joystick does not work.
Regularly cleaning your computer's mainframe and monitor not only keeps it looking beautiful, but more importantly allows for good ventilation inside and outside the machine to dissipate heat. This will prevent the hardware from being damaged by the high temperatures inside the host computer, or cause the system to become unstable and crash more often. In addition, such as keyboards, mice, and joysticks devices are almost always used equipment, such as to avoid these devices become quot;consumablesquot; if you must have the habit of maintenance, not only to allow the use of smooth and comfortable, but also to save the cost of replacement or maintenance.