Replacement of freezer capacitors need to pay attention to the following steps:
Step 1: Confirm the capacitor model
First of all, you need to check the model number and specifications of the capacitor, and purchase it according to the capacitor parameters. The capacitor's parameters, capacity, voltage and other information are usually printed on the body of the capacitor.
Step 2: Turn off the power
Before replacing the capacitor, you need to first turn off the power to avoid harm to personnel and equipment.
Step 3: Disassemble the capacitor
Use a wrench or screwdriver to unscrew the capacitor screws and remove the broken capacitor.
Step 4: Install the new capacitor
Insert the new capacitor into the appropriate socket, secure the screw arm locating nut, and tighten the screw.
Step 5: Wiring
Connect the wires on the capacitor, connect the positive and negative terminals correctly, and connect the wires well.
Step 6: Test
Re-open the power supply, check the working condition of the new capacitor, if there is no problem, pressurize and test the cooling effect.
The above are the steps for replacing freezer capacitors, replacing capacitors need to be careful, if not operated properly may cause excessive current and high temperature, causing damage to the equipment. Therefore, you need to pay attention to safety when replacing the capacitor, be sure to turn off the power and follow the steps.