1, the environmental requirements of the location of the machine should be away from the vibration source, should avoid direct sunlight and heat radiation, to avoid the impact of humidity and airflow. If there is a vibration source near the machine, the machine should be set up around the anti-vibration ditch. Otherwise, it will directly affect the machining accuracy and stability of the machine tool, will make the electronic components poor contact, failure, affecting the reliability of the machine tool.
2, the power requirements of general CNC lathe installed in the machining shop, not only the ambient temperature changes, poor conditions of use, and a variety of electromechanical equipment, resulting in large fluctuations in the power grid. Therefore, the location of the installation of CNC lathes, the need for power supply voltage is strictly controlled. Power supply voltage fluctuations must be within the allowable range, and maintain relative stability. Otherwise it will affect the normal work of the CNC system.
3, temperature conditions of CNC lathe ambient temperature below 30 degrees Celsius, the relative temperature is less than 80%. Generally speaking, CNC electronic control box is equipped with an exhaust fan or chiller inside to keep the electronic components, especially the central processing unit working temperature is constant or temperature difference changes are very small. Excessive temperature and humidity will result in reduced control system component life and lead to increased failures. Increased temperature and humidity, and increased dust will create bonding in the integrated circuit boards and lead to short circuits